OPEN MIND at EuroMold 2013 with hyperMILL®

Shape faster

Wessling (Germany), 26 November 2013 – OPEN MIND Technologies AG, one of the leading CAD/CAM software developers, is set to present at the 20th EuroMold trade fair at the trade fair grounds in Frankfurt, Germany, from 3 to 6 December 2013. Everything at Stand 8.0 L07 will revolve around machining strategies in the hyperMILL® 2013 CAM software and the hyperMAXX® high-performance cutting module. The hyperCAD®-S CAD software, which is specially geared towards the requirements of CAM users, will also form part of OPEN MIND’s exhibition.

Tool and mould manufacturers are familiar with typical challenges in machining. OPEN MIND has implemented machining strategies in hyperMILL® 2013 that address these challenges. For example, the software developer developed the new ‘Rib Milling’ cycle together with one of the largest German automotive manufacturers. This is good news for tool makers who need to mill deep, narrow cavities for ribs in their moulds. The cycle automatically detects grooves that have to be milled. Steep areas and floors are machined separately. Depending on the workpiece geometry, the system selects a suitable roughing strategy, and contiguous areas are completely machined.

An additional highlight of hyperMILL® 2013 is its extension for ‘5axis contour offset finishing’: Barrel cutters can now be used here. This strategy uses the large effective radius of the barrel cutter with a point milling contact style. This allows increased step-over distances between passes for free-form surfaces.

Harmonic movements during roughing  

hyperMAXX®, the roughing module fully integrated into hyperMILL®, combines optimal milling paths, maximum material removal and the shortest possible machining times. Ideally distributed milling paths and the dynamic feedrate adjustment to existing cutting conditions ensure that milling always takes place at the fastest possible feedrate. Machining is always performed using climb milling, in a spiral retraction of tool movements that increasingly approximate the required contour as they reach the end. The hyperMAXX® tool path is calculated with regard to the chip volume, machine data, the material to be cut and balanced movement.

CAD for CAM users  

The architecture, core, graphics, database, user interface and API for hyperCAD®-S have been redeveloped. The software is perfect for imported data. Users have the advantage of being able to easily modify any of the geometry elements at any time. Curves and free-form surfaces are depicted using Bezier and NURBS geometries. In addition to the familiar basic elements for construction, the core now also provides a number of elements that specifically aid CAM programmers, including tool paths, polygon networks, point clouds and a rectangle element.


About OPEN MIND Technologies AG

OPEN MIND Technologies AG is a leading developer of CAM/CAD software and postprocessors for designing and manufacturing complex moulds and parts. OPEN MIND is one of the five largest providers of CAM solutions according to the NC Market Analysis Report 2013 compiled by CIMdata, a market research company.

OPEN MIND offers an extensive range of products from 2D feature-oriented solutions for milling standard parts through to software for 5axis simultaneous machining.

With their hyperMILL® software, which is used in the automotive, tool and mould manufacturing, mechanical engineering, medical and aerospace, and watch and jewellery industries, OPEN MIND Technologies AG is represented in all the important markets in Asia, Europe and America.

OPEN MIND Technologies AG is a Mensch und Maschine company (


Additional information is available upon request or from our website at


OPEN MIND Technologies USA, Inc.

1492 Highland Avenue, Unit 3

Needham MA 02492


Phone: +1  339  225  4557 office

Phone: +1  888  516 1232 x102 toll-free

Fax: +1  270  912 5822

E-mail: Email Contact


OPEN MIND Technologies UK Ltd., Oxford

Units 1 and 2

Bicester Business Park

Telford Road


Oxfordshire OX26 4LN


Phone: +44  1869  290 003

Fax: +44  1869  369 429

E-mail: Email Contact

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Colortrac: LearnMore
TurboCAD pro : Free Trial

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise