PLDA and Fastor Systems Announce Implementation of PLDA’s Industry Leading PCIe IP with DMA into Upcoming NVMe Solid State Drive from Fastor Systems

Solution uses the power of PCIe and DMA to implement networking concepts in an SSD

SAN JOSE, Calif. — (BUSINESS WIRE) — November 14, 2013 — PLDA, the industry leader in PCI Express® IP solutions and Fastor Systems, an innovative provider of Solid State Drives for enterprise and cloud applications, today announced the incorporation of PLDA’s PLDA PCIe IP with advanced built-in DMA into an upcoming Fastor Systems’ NVMe Solid State Drive.

Fastor Systems’ architecture is the industry’s first and only fabric based SSD in the marketplace today. The use of this non-blocking switch fabric has enabled a multitude of disruptive benefits resulting in a new generation of features and functions, or SSD 2.0. These benefits include:

  • Eliminates the bus contention inherent in all existing SSDs, and results in higher and more stable performance as well higher capacity and lower cost of ownership
  • Allows the full performance potential of the Flash Memory to be unleashed, which is not possible in any controller-centric architecture
  • Enables dramatic reductions in implementation cost and power consumption through SSD virtualization

The Fastor Systems NVMe SSD utilizes IP from PLDA to enable the high performance levels required within their PCIe subsystem. The PLDA IP provides an easy-to-use and fully configurable PCI Express interface IP with integrated multi-channel DMA.

“The integration of PLDA’s silicon-proven IP within Fastor Systems’ solid state drive will result in a high-quality, integrated hardware and software solution and we are proud to be a part of its creation,” stated Stephane Hauradou, CTO for PLDA.

According to Daniel Mahoney, CEO of Fastor Systems, “PLDA’s IP provides dramatic improvements in DMA performance in our PCIe interface block, allowing us to fully demonstrate the performance potential of our new architecture.” He added, “PLDA’s IP is well supported by their technical staff, and it will be an important element in the ultimate success of our product and the next generation SSD architecture which it embodies.”

Product Availability

  • For information on Fastor Systems, their upcoming NVMe SSD release and their complete line of SSD solutions, visit them online at www.fastorsystems.com.
  • PLDA provides several silicon-ready PCIe with DMA IP solutions for Xilinx and Altera FPGAs. All products are available now. For more information, please visit www.plda.com.

About PLDA

PLDA designs and sells intellectual property (IP) cores for FPGA and System-on-Chip (SoC) that aim to accelerate time-to-market for embedded electronic designers. PLDA specializes in high-speed interface protocols and technologies such as PCIe, and Ethernet.

PLDA IP cores are provided with a complete set of tools, including FPGA prototyping cards, drivers and APIs, testbenches and benefit from a global support and sales organization able to sustain over 2,000 ASIC customers worldwide.

PLDA is a global company with offices in North America (San Jose, California) and in Europe (France, Italy and Bulgaria). For more information visit www.plda.com.

About Fastor Systems

Fastor Systems is engaged in bringing future-proof solutions to the rapidly growing Cloud and Enterprise SSD markets. Fastor’s disruptive approach will provide customers with vastly enhanced application performance, reduced total cost of ownership and lower power consumption. Fastor’s advantages scale with each new interface standard, and are adaptable to all types of storage class memory media. Fastor represents the future of SSDs. For more information, visit www.fastorsystems.com.

Trademarks

All registered trademarks and other trademarks belong to their respective owners.



Contact:

PLDA
Michelle Tang, +1 408-273-4528
Email Contact
or
Fastor Systems
Daniel Mahoney, +1 408-216-8063
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise