Altera Announces Quad-Core 64-bit ARM Cortex-A53 for Stratix 10 SoCs

Manufactured on Intel's 14 nm Tri-Gate Process, Altera Stratix® 10 SoCs Will Deliver Industry's Most Versatile Heterogeneous Computing Platform

SANTA CLARA, Calif., Oct. 29, 2013 — (PRNewswire) — ARM TechCon -- Altera Corporation (NASDAQ: ALTR) today announced that its Stratix 10 SoC devices, manufactured on Intel's 14 nm Tri-Gate process, will incorporate a high-performance, quad-core 64-bit ARM Cortex™-A53 processor system, complementing the device's floating-point digital signal processing (DSP) blocks and high-performance FPGA fabric. Coupled with Altera's advanced system-level design tools, including OpenCL, this versatile heterogeneous computing platform will offer exceptional adaptability, performance, power efficiency and design productivity for a broad range of applications, including data center computing acceleration, radar systems and communications infrastructure.

The ARM Cortex-A53 processor, the first 64-bit processor used on a SoC FPGA, is an ideal fit for use in Stratix 10 SoCs due to its performance, power efficiency, data throughput and advanced features. The Cortex-A53 is among the most power efficient of ARM's application-class processors, and when delivered on the 14 nm Tri-Gate process will achieve more than six times more data throughput compared to today's highest performing SoC FPGAs. The Cortex-A53 also delivers important features, such as virtualization support, 256TB memory reach and error correction code (ECC) on L1 and L2 caches. Furthermore, the Cortex-A53 core can run in 32-bit mode, which will run Cortex-A9 operating systems and code unmodified, allowing a smooth upgrade path from Altera's 28 nm and 20 nm SoC FPGAs.

"ARM is pleased to see Altera adopting the lowest power 64-bit architecture as an ideal complement to DSP and FPGA processing elements to create a cutting-edge heterogeneous computing platform," said Tom Cronk, executive vice president and general manager, Processor Division, ARM. "The Cortex-A53 processor delivers industry-leading power efficiency and outstanding performance levels, and it is supported by the ARM ecosystem and its innovative software community."

Leveraging Intel's 14 nm Tri-Gate process and an enhanced high-performance architecture, Altera Stratix 10 SoCs will have a programmable-logic performance level of more than 1GHz; two times the core performance of current high-end 28 nm FPGAs.

"High-end networking and communications infrastructure are rapidly migrating toward heterogeneous computing architectures to achieve maximum system performance and power efficiency," said Linley Gwennap, principal analyst at The Linley Group, a leading embedded research firm. "What Altera is doing with its Stratix 10 SoC, both in terms of silicon convergence and high-level design tool support, puts the company at the forefront of delivering heterogeneous computing platforms and positions them well to capitalize on myriad opportunities."

By standardizing on ARM processors across its three-generation SoC portfolio, Altera will offer software compatibility and a common ARM ecosystem of tools and operating system support. Embedded developers will be able to accelerate debug cycles with Altera's SoC Embedded Design Suite (EDS) featuring the ARM Development Studio 5 (DS-5™) Altera® Edition toolkit, the industry's only FPGA-adaptive debug tool, as well as use Altera's software development kit (SDK) for OpenCL to create heterogeneous implementations using the OpenCL high-level design language.

"With Stratix 10 SoCs, designers will have a versatile and powerful heterogeneous compute platform enabling them to innovate and get to market faster," said Danny Biran, senior vice president, corporate strategy and marketing at Altera. "This will be very exciting for customers as converged silicon continues to be the best solution for complex, high-performance applications."

About Altera
Altera® programmable solutions enable designers of electronic systems to rapidly and cost effectively innovate, differentiate and win in their markets. Altera offers FPGAs, SoCs, CPLDs, ASICs and complementary technologies, such as power management, to provide high-value solutions to customers worldwide. Follow Altera via Facebook, Twitter, LinkedIn, Google+ and RSS, and subscribe to product update emails and newsletters. Visit www.altera.com.

ALTERA, ARRIA, CYCLONE, ENPIRION, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as trademarks or service marks are the property of their respective holders as described at  www.altera.com/legal.

Editor Contact:
Sue Martenson
Altera Corporation
(408) 544-8158
Email Contact

SOURCE Altera Corporation

Contact:
Altera Corporation
Web: http://www.altera.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise