Altera Nios II Processor Model Delivered By Imperas

Open source simulation model enables Altera customers to more easily validate and debug Nios II embedded software

San Jose, Calif., October 22nd, 2013—Imperas Software Ltd. ( www.imperas.com), founder of the Open Virtual Platforms™ (OVP™) consortium, today announced the availability of the Altera Nios II embedded processor OVP model. Jointly developed by Imperas and Altera, this open source model will enable a high-performance development environment for Nios II embedded software.

The OVP Fast Processor Model of the Nios II may be configured at start-up to match the intended behavior of the actual FPGA component, but will execute significantly faster than real-time. This allows embedded software to be tested more rigorously and earlier in the design process, accelerating complex software development cycles.

“Imperas led formation of the Open Virtual Platforms consortium to improve the embedded software development experience,” said Simon Davidmann, CEO of Imperas. “With Altera, we have taken an important step today by providing designers with a high-performance model of the Altera Nios II processor, executing many times faster than other development offerings to enable the most comprehensive software verification solution available.”

The model and underlying simulator includes a comprehensive application program interface (API) that extends visibility into the processor behavior. This allows the designer to run embedded software, either from Altera or their own code, and leverage advanced analysis and debug operations, including operating system awareness.

“Engineers are seeking rapid development methods that also provide immediate feedback on configuration or customization, said Premal Buch, vice president, Software Engineering, Altera. “The Altera Nios II device has been the most widely used FPGA-based processor for many years, and this OVP model will help customers expand their design options.”

The complexity of system modeling in multi-core and multi-processor environments is driving the need for advanced virtual platform development and verification environments. Verification technologies that operate at a range of abstractions, including CPU- and OS-Aware levels, and that can provide customizable operations that work intimately with the design, are required. The performance of these systems will become more critical as the volume of tests required increase.

The new model of Altera’s Nios II processor will be showcased in the Imperas booth, number 520, at ARM TechCon, October 29–31, 2013.

Availability
The Altera Nios II OVP processor model is available now, and may be downloaded from the OVP website:  www.OVPworld.org/Nios_II.

About Imperas and OVP
Imperas Software was founded in 2008 to develop and deliver embedded software development systems. The company’s comprehensive product line enables the rapid creation of high-performance virtual platforms and the efficient development of embedded software utilizing those platforms. Imperas’ technology allows for software engineering schedules to be significantly reduced while improving the quality of products relying on embedded systems. In 2008 Imperas founded the Open Virtual Platforms (OVP) consortium to improve the availability of open model libraries and virtual platform infrastructure. Leading communications, automotive, consumer electronics and embedded processor companies rely on Imperas for the development of their electronic products. The company’s corporate headquarters is located near Oxford, UK and it maintains support and sales organizations in Silicon Valley, California and Tokyo, Japan. For more information about Imperas, please go to  www.imperas.com.




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise