IXYS ICD Introduces a 5Amp, 500Volt Optically Isolated Power Solid State Relay in the ISOPLUS-264 Package

The CPC1968J Power Relay Offers Lowest Weight Package with 2.5kVrms Input to Output Isolation

BEVERLY, Mass. — (BUSINESS WIRE) — October 17, 2013 — IXYS Integrated Circuits Division (ICD), Inc., a wholly owned subsidiary of IXYS Corporation (NASDAQ: IXYS), announced the immediate availability of the CPC1968J, 2Arms Solid State Power Relay. The CPC1968J is a single-pole normally open (1-Form-A) solid state power relay that is rated for up to 5A continuous load current.

Optically coupled MOSFET technology enables the CPC1968J to provide 2.5kVrms of input to output isolation. The output is constructed with efficient MOSFET switches and IXYS ICD’s patented OptoMOS architecture and technology.

The CPC1968J offers the lowest on-resistance in the power relay family of devices with a load voltage rating of 400V or greater. This combination of low on-resistance, high load voltage and high load current handling capability makes this relay suitable for a variety of high performance switching applications such as medical equipment, industrial controls, electronic switching and instrumentation. The unique ISOPLUS-264 package pioneered by IXYS Power Division enables solid state relays to achieve the highest load current and power ratings in a small footprint. Package dimensions are 19.9 X 26.2 X 5.0 mm with a weight of 7.1 grams.

The ISOPLUS-264 package features power silicon devices mounted onto a Direct Copper Bond (DCB) substrate to maximize power handling capability. This DCB ceramic, the same substrate used in high power modules, not only provides 2.5kVrms isolation but also has a very low thermal resistance of 0.3 degrees C/W.

Availability

The CPC1968 is available in production quantities. For additional information, please contact your local sales representative: http://www.ixysic.com/home/pages.nsf/locate.rep or visit http://www.ixysic.com/home/pdfs.nsf/www/CPC1968.pdf/$file/CPC1968.pdf

About IXYS Integrated Circuits Division and IXYS Corporation

IXYS Integrated Circuits Division (formerly Clare, Inc.), a leader in the design and manufacture of solid state relays and high voltage integrated circuits, is a wholly owned subsidiary of IXYS Corporation. IXYS Corporation develops and markets primarily high performance power semiconductor devices that are used in controlling and converting electrical power efficiently in power systems for the telecommunication and internet infrastructure, motor drives, medical systems and transportation. IXYS also serves its markets with a combination of digital and analog integrated circuits. Additional information about IXYS Integrated Circuits Division and IXYS may be found at www.ixysic.com and www.ixys.com.

Safe Harbor Statement

Any statements contained in this press release that are not statements of historical fact, including the performance, rating, availability, reliability, operation and suitability of products for various applications, may be deemed to be forward-looking statements. There are a number of important factors that could cause the results of IXYS to differ materially from those indicated by these forward-looking statements, including, among others, risks detailed from time to time in the Company's SEC reports, including its Form 10-Q for the fiscal quarter ended June 30, 2013. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements.



Contact:

IXYS Corporation
Catherine Austin, 978-524-6823
Fax: 978-524-4900




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise