Consistent harness design solution in cooperation with CATIA specialists
After acquiring the Harness Integration Manager (HIM) from the Engineering Center Steyr (Magna group), Aucotec AG goes yet one step further for more consistency in the harness design process of the automotive, aerospace, and the transportation industry. In cooperation with Intec Industrie-Technik GmbH & Co. KG, Aucotec developed a link of its harness design system Engineering Base (EB) Cable with Catia V5. It significantly facilitates the interaction of mechanics and electrics as it allows both sides to start the design process in parallel and enables them to synchronize their information at any time.
Sample of major value
Aucotec and Intec have now developed a sample project that illustrates the time-saving and error-saving capabilities of the new link. The core element of the solution is the shortening of the design process for wiring harnesses as those involved in electronics/electrical systems and mechanical systems can start their work independently of each other. After one of any possible data synchronizations, all changes are displayed and the responsible employee in that case decides which changes are adopted. These decisions are also recorded in a traceable manner.
The Catia plug-in HIM that enables this close interaction was developed by the Austrian Engineering Center Steyr, which is part of the Magna group. At the start of this year, Aucotec AG exclusively assumed all related rights and obligations. Intec takes care of the national and international support for future users of this link.
By means of the HIM, Catia V5 receives the electrological definitions - thus the specification of electrical components - from EB Cable. HIM transfers the wiring harness data that is processed in 3D (topology, length, protective material) back to EB Cable. The routing of the individual wires takes place there and the 2D wiring harness conductors and follow-up documentation are generated automatically, for example, form board drawings, calculations of working hours, etc.
Faster, more consistent, more cost-effective
This cooperative solution permits exceptionally consistent wiring harness engineering for any type of harness design: without data discontinuities due to system transitions, without duplicate data entries or manual additions. This eliminates sources of error and the quality increases with significant savings of time.
Aucotec AG develops engineering software for the entire life cycle of machines, plants and mobile systems - with over 25 years of experience. The solutions range from flow diagrams via process control and electrical engineering for large-scale plants to modular harness design in the automotive industry. Over 40,000 Aucotec software systems are in use worldwide. Aucotec AG, with headquarters in Hanover, also comprises two additional German development centres in Frankfurt and Constance, four regional distribution and support offices as well as a global network of subsidiaries and partners.
Intec Industrie-Technik GmbH & Co. KG, founded in 1999, specialises in engineering services for the automotive and aerospace industries. In the aerospace industry, the focus is on the development of components and systems, their integration and technical documentation. In automotive development, the spectrum ranges from first design concepts to the supervision of entire series of models after the start of production. In addition to its corporate headquarters in Munich, the company has three offices in southern Germany.
If printed, we would appreciate receiving a copy. Thank you very much!
AUCOTEC AG, Oldenburger Allee 24, 30659 Hannover
Press and Public Relations
SOURCE AUCOTEC AG