Intergraph(R) Webinar on June 11th to Demonstrate CADWorx(R) Building Information Modeling for Plant Design

HOUSTON, TX -- (Marketwired) -- Jun 04, 2013 -- Intergraph will host a CADWorx webinar on June 11, 2013 at 10:00 a.m. CT that will discuss Building Information Modeling (BIM) workflow in the architecture, engineering, and construction (AEC) industry including the use of 3D modeling solutions for design and construction projects. The webinar will include examples of BIM projects where the use of Intergraph CADWorx 3D modeling contributed to the stakeholders' success. The webinar leader will be Michael Smith from the Intergraph CADWorx team who brings 30 years of experience in the design, engineering, and construction industries.

For more information about the webinar, visit http://coade.typepad.com/coadeinsider/2013/05/cadworx-bim-webinar-1-of-2-an-overview-june-11-2013.html. To register for the first webinar, visit http://icas.intergraph.com/BIM-Webinar-June-11-2013.

For more information on Intergraph CADWorx, visit http://www.intergraph.com/products/ppm/cadworx/. For information on Intergraph analysis products visit http://www.intergraph.com/ppm/analysis.aspx.

About Intergraph CADWorx & Analysis Solutions
The Intergraph CADWorx & Analysis Solutions (CAS) products allow design and engineering to share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. They include CADWorx Plant Design Suite for AutoCAD®-based intelligent plant design modeling, process schematics and automatic production of plant design deliverables; CADWorx DraftPro for intelligent 2D design and layout; CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for vessel and exchanger design and analysis; and TANK for the design and analysis of oil storage tanks. For information on Intergraph CAS, visit www.coade.com.

Intergraph, the Intergraph logo, CADWorx, CAESAR II and PV Elite are registered trademarks, and TANK is a trademark of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. © 2013 Intergraph Corp. All rights reserved.

 

Add to Digg Bookmark with del.icio.us Add to Newsvine

 






Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise