Microsemi Delivers Industry's Most Highly Integrated Synchronous Ethernet Timing Card Device for Wireless Infrastructure and Metro Ethernet

Single-chip Device Integrates up to Four Digital Phase Lock Loops for Timing and Line Card Applications

ALISO VIEJO, Calif., June 4, 2013 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today expanded its market-leading Synchronous Ethernet (SyncE) product portfolio with the single-chip, ZL30162 timing card device for mobile infrastructure and packet-based carrier Ethernet networks. The ZL30162 features four T0 high quality and highly programmable integrated digital phase lock loops (DPLLs), capable of locking up to 11 inputs for applications that require independent transmit and receive timing paths.

(Logo:   http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)

The company also introduced the ZL30161 and ZL30163 timing card devices with single and dual DPLLs, respectively. Each of the DPLLs on the ZL30161, ZL30162 and ZL30163 can be configured to perform as numerically controlled oscillators (NCOs) to recover a clock based on packet-based timing protocols such as IEEE1588 that can be used for GSM, WCDMA and LTE applications.

The ZL30162 is based on Microsemi's unique two stage ClockCenterTM architecture and supports any rate-to-any rate frequency translation from 1Hz to 750MHz, including GPS 1 pulse per second (pps) input. As a monolithic device, the ZL30162 allows for very flexible input reference switching and output clock configuration with very low power consumption. The four high-precision synthesizers generate output clock frequencies with jitter performance that can directly drive 10G and 40G PHY devices. This capability allows Microsemi to capitalize on growing opportunities for 10 Gigabit Ethernet devices in Carrier Ethernet applications. In a recent report, Infonetics Research noted that Carrier Ethernet equipment ports will top 95 million worldwide by 2017, with 10 Gigabit Ethernet growing fast to pass 1 Gigabit Ethernet.

"Our highly integrated ZL30162 allows equipment makers to use a single device to meet the requirements of both timing card and line card applications," said Maamoun Seido, vice president of Microsemi's Timing Products group. "In addition, this highly integrated device complies with ITU-T Recommendation G.8262 network synchronization performance guidelines, which makes it ideal for a wide range of applications such as wireless base stations, radio network controllers, gateways, aggregation and transmission equipment, and routers while reducing design complexity."

The ZL30161 features one DPLL and three synthesizers, which is ideal for use in wireless base stations where multiple different frequency clocks are required by baseband processor. The ZL30161 can take any clock from 1Hz to 750MHz and generate up to six LVPECL and six LVCMOS clock outputs. The ZL30163 features two DPLLs and four synthesizers ideal for traditional active and redundant timing card applications or in "single board system" applications where the timing device provides both timing card and line card functionality.

All three devices support narrow loop bandwidth (0.1 mHz to 1 KHz), holdover, hitless reference switching and compliant to different ITU-Recommendations related to network synchronization. Any input reference can be fed with Sync (frame pulse) or clock and each of the DPLLs can be programmed to synchronize to sync pulse and sync pulse/clock pair.

Availability and Support 

All three products—ZL30161, ZL30162 and ZL30163—are available in volume production quantities now. For more information visit http://www.microsemi.com/timing-and-synchronization/synchronous-ethernet-synce. Additional information on Microsemi's timing devices, including full data sheets and application notes, is available to qualified customers. To learn how to become a qualified customer, please contact a  local sales representative or email  Email Contact.  

About Microsemi

Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance, radiation-hardened and highly reliable analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services.Microsemi is headquartered in Aliso Viejo, Calif. , and has approximately 3,000 employees globally. Learn more at  www.microsemi.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise