Cadence Design Tools Certified for TSMC 16nm FinFET Process and for TSMC 20nm Process

SAN JOSE, CA -- (Marketwired) -- May 29, 2013 -- Cadence Design Systems, Inc. (NASDAQ: CDNS)

HIGHLIGHTS

  • DRM and SPICE model V0.1 tool certification provides chip designers early access to TSMC 16-nanometer FinFET process
  • Full flow certification achieved for TSMC 20-nanometer process

Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation, announced today that several of its system-on-chip development tools have achieved version 0.1 of design rule manual (DRM) and SPICE model tool certification for TSMC's 16-nanometer FinFET process. The completion of the early stage tool certification milestone means advanced node customers can start developing designs and leveraging the lower power and higher performance benefits required for next-generation mobile platforms.

The tool certification serves as the foundation of design infrastructure for 16-nanometer FinFET technology. The certified Cadence® tools are Spectre, Liberate, Virtuoso®, Encounter® Digital Implementation (EDI) System, Encounter Timing System, Virtuoso Power System, Encounter Power System, Physical Verification System and QRC Extraction. Several Cadence design IP offerings are also available for customer test chips at this advanced node.

Additionally, TSMC has certified the production-ready Cadence design flow for its 20-nanometer manufacturing process. Customers can now take full advantage of the Cadence solution to reap the speed, power and area benefits of this advanced node.

The full tool chain was certified at 20 nanometers through the design of an ARM® Cortex®-A9 processor, and is the first integrated tool certification for TSMC 20SoC process technology. The Cadence tools used are Virtuoso, EDI System, Encounter Timing System, Encounter Power System, Virtuoso Power System, Physical Verification System and QRC Extraction.

"Vertical collaboration at the earliest possible stages of solution development is key to delivering co-optimized solutions," said Dr. Chi-Ping Hsu, senior vice president of research and development, Silicon Realization Group at Cadence. "TSMC's certification of Cadence tools for 16-nanometer FinFET and 20-nanometer design underscores our joint commitment to working with our customers to help ensure their success."

"Our early DRM & SPICE certification, achieved through TSMC's Open Innovation Platform® collaboration model, informs design teams that they can confidently use these Cadence tools for early development of high-performance, low-power 16-nanometer FinFET designs," said Suk Lee, TSMC senior director, Design Infrastructure Marketing Division. "And the certification of the Cadence tools for 20SoC indicates their readiness for this advanced technology process."

Today's announcement complements the first ARM Cortex-A57 64-bit processor implemented in FinFET technology, also developed using Cadence technology. Cadence and TSMC also recently announced their collaboration on 16 nanometers.

About Cadence
Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available at www.cadence.com.

Cadence and the Cadence logo are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

Add to Digg Bookmark with del.icio.us Add to Newsvine

For more information, please contact:
Dean Solov
Cadence Design Systems, Inc.
408-944-7226

Email Contact 





Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise