LMS Test.Lab Rev 13 helps automotive engineers further improve and speed up testing processes

Leuven, Belgium, 22 May 2013 – LMS, which was recently acquired by Siemens and is now a business segment within Siemens PLM Software, announces a new release of its widespread LMS Test.Lab engineering suite for test data acquisition and analysis. LMS Test.Lab Rev 13 includes a range of new solutions to help engineers test quicker, without compromising accuracy. Highlights for the automotive industry include a new approach to pass-by noise engineering, enhanced vibro-acoustic engineering capabilities and a fully integrated collaborative data management solution. The new release also offers advanced support for the NVH engineering of hybrid and electrical vehicles.

LMS TechTalk - NVH Simulation, interior and exterior vehicle acoustics

“LMS Test.Lab is designed to make testing more efficient and, as such, boost a test facility’s productivity, while delivering reliable results and valuable engineering insight. With Revision 13 of LMS Test.Lab we continue along this path, adding new capabilities and new productivity features,” commented Bruno Massa, Vice-President of LMS Test Division.

Extended solution for Pass-by Noise (PBN) engineering solution

With new certification methods and lower noise emission level limits, PBN standards are evolving considerably. LMS therefore made particular efforts to take PBN engineering to a new level when designing Rev 13 of LMS Test.Lab. By combining classical frequency-based and time-domain transfer path analysis (TPA) measurements with PBN measurements, Rev 13 provides a brand-new way to identify source contribution: it allows engineers to easily analyze which subsystems contribute most to the total noise level, relative to the vehicle position. The new approach can deliver results extremely fast. All interior or exterior PBN measurements can be finalized within just two days.

Advances in structural testing

When it comes to structural testing LMS Test.Lab offers an exceptionally complete set of tools, with a strong focus on testing accuracy and productivity. Revision 13 provides enhanced possibilities for order-based modal analysis and an improved version of the LMS PolyMAX modal parameter estimator. In addition, the new release allows modal analysis on strain gauge data.

Extended offering for vibro-acoustic testing

Another enhancement in Rev 13 is the extended Sound Source Localization capabilities. By coupling advanced processing technology to optimized array definition, LMS Test.Lab Rev 13 helps engineers easier identify and separate different sound sources. Further improvements in the field of acoustic testing include additional extensions to the Transfer Path Analysis portfolio: revision 13 expands the frequency range and allows analysis in the time domain for higher frequency variables.

Full data management solution

To make LMS Test.Lab Rev 13 complete, LMS integrated a full data management solution. Designed specifically for engineering departments, the data management solution helps testing engineers with data collection, annotation, storage and sharing. As all the data is now stored on a central server, everyone involved in testing analysis and interpretation of results can easily search and access all the information, in real time. The thin web client allows data access and collaboration from any mobile internet connection. 

Better support of NVH testing on hybrid and electric vehicles

A last crucial addition to LMS Test.Lab Rev 13 is its advanced support for the engineering of hybrid and electric vehicles. With the focus on hybrid and e-vehicles growing, testing engineers are facing new acoustic and NVH challenges. Noises that are covered up by the engine and other low-frequency noises in traditional cars, for example, become audible and disturbing in their electric counterparts. LMS Test.Lab Rev 13 LMS helps reduce disturbing wind noise perceived in the car cockpit and better handle perceived road noise or auxiliary noise. Besides that, the new release also offers capabilities to tackle NVH issues like the high-frequency tonal components generated by the inverters that control the power of AC motors through pulse width modulation.

 

About LMS, A Siemens Business 

LMS is a leading provider of test and mechatronic simulation software and engineering services in the automotive, aerospace and other advanced manufacturing industries. As a business segment within Siemens PLM Software, LMS provides a unique portfolio of products and services for manufacturing companies to manage the complexities of tomorrow’s product development by incorporating model-based mechatronic simulation and advanced testing in the product development process. LMS tunes into mission-critical engineering attributes, ranging from system dynamics, structural integrity and sound quality to durability, safety and power consumption. With multi-domain and mechatronic simulation solutions, LMS addresses the complex engineering challenges associated with intelligent system design and model-based systems engineering. Thanks to its technology and more than 1250 dedicated people, LMS has become the partner of choice of more than 5000 manufacturing companies worldwide. LMS operates in more than 30 key locations around the world.

About Siemens PLM Software

Siemens PLM Software, a business unit of the Siemens Industry Automation Division, is a leading provider of product lifecycle management (PLM) software and services with seven million licensed seats and 71,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively to deliver open solutions to help them make smarter decisions that result in better products. For more information on Siemens PLM Software products and services, visit www.siemens.com/plm 

###

Note: LMS Test.Lab and LMS PolyMAX are trademarks or registered trademarks of LMS INTERNATIONAL NV. Siemens and the Siemens logo are registered trademarks of Siemens AG. All other trademarks, registered trademarks or service marks belong to their respective holders.


Email Contact






Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise