AVEVA supports Calgary’s oil & gas industry

AVEVA to showcase solutions for EPCs and Owner Operators at key events in North America

 

Calgary, AB - 4 April 2013: AVEVA today announced its attendance at two key events for the Calgary-based North American oil & gas industry: the Slugging It Out Conference 2013 on April, 15 and the ISA Calgary Show 2013 being held April, 17-18. AVEVA will showcase solutions that enable Engineering, Procurement and Construction contractors (EPCs) to reduce project execution time and cost and Owner Operators to improve the reliability and efficiency of their as-built 3D plant design and instrumentation and electrical engineering data.

The Slugging It Out Conference 2013, at which AVEVA is a Silver Level sponsor, is hosted by the Canadian Heavy Oil Association (CHOA) and the Society of Petroleum Engineers (SPE). From its AVEVA Plant portfolio, AVEVA will showcase its brand-new product, AVEVA Everything3D (AVEVA E3D), which enables Plant Design for Lean Construction. This will demonstrate the power of integrating laser scanning with 3D design. The as-built plant environment can be accurately captured to provide the oil & gas industry the ability to reduce construction time and costs for both greenfield and brownfield capital projects.

At the ISA Calgary Show 2013, on booth 1142, AVEVA will be showcasing its AVEVA Instrumentation and AVEVA Electrical solutions that improve automation and increase project efficiency, as well as reduce engineering and design costs. AVEVA will showcase how EPCs and Owner Operators can manage their instrumentation and electrical data and produce ISA-standard datasheets and drawing deliverables.

“We are presenting technologies at these important events that will resonate with the particular interests and priorities of the different audiences,” said William Muldoon, Executive Vice-President – North America, AVEVA. “AVEVA Instrumentation and AVEVA Electrical will help increase efficiency using ISA- standards on major projects. Our AVEVA E3D solution will showcase how EPCs and Owner Operators can reduce fabrication and construction costs using AVEVA’s Plant Design for Lean Construction philosophy.  We are proud to support these two events in Calgary and look forward to demonstrating the benefits of AVEVA’s solutions to the Canadian oil & gas industry.”

The Slugging It Out Conference 2013 takes place in the Palomino Room, BMO Centre, Stampede Park, Calgary. The ISA Calgary Show 2013 takes place in Halls D & E, Stampede Park, Calgary.

 

Follow AVEVA on twitter @avevagroup
Watch AVEVA on YouTube www.youtube.com/avevagroup
For customer stories read AVEVA World Magazine at www.aveva.com/Media-Centre/AWM

 

About AVEVA

AVEVA is a leader in engineering design and information management solutions for the plant, power and marine industries.  For more than 45 years, it has delivered business critical software solutions to owner operators, engineering contractors and shipbuilders around the world.  For further information please visit www.aveva.com/ednotes.

 

Copyright 2013 AVEVA Solutions Limited. All rights reserved. AVEVA Solutions Limited is owned by AVEVA Group plc. AVEVA, the AVEVA logos and AVEVA product names are trademarks or registered trademarks of AVEVA Group plc or its subsidiaries in the United Kingdom and other countries. Other brands and products names are the trademarks of their respective companies.



Read the complete story ...


Review Article Be the first to review this article
HP

Autodesk - DelCAM

Featured Video
Jobs
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Lead Geospatial Analyst for Alion at McLean, VA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise