Toshiba Develops the TMPM36BFYFG, a New CORTEX™-M3 Core-Based Microcontroller

TOKYO — (BUSINESS WIRE) — April 2, 2013Toshiba (TOKYO:6502) today announced the latest addition to its TXO3 series of ARM® core-based microcontrollers, the TMPM36BFYFG. The new device improves on basic performance and cuts power consumption to 2/3 that of Toshiba's previous products. Mass production will begin in November, 2013.

Toshiba announced the latest addition to its TXO3 series of ARM(R) core-based microcontrollers, the  ...

Toshiba announced the latest addition to its TXO3 series of ARM(R) core-based microcontrollers, the TMPM36BFYFG. The new device improves on basic performance and cuts power consumption to 2/3 that of Toshiba's previous products. Mass production will begin in November, 2013. (Photo: Business Wire)

Development background:

Toshiba started its first Cortex™-M3 core-based microcontroller, TMPM330FDFG, in 2009. Since then, the company has focused on developing product groups that incorporate specific designs for a variety of applications.

As the functionality and performance of embedded applications has improved, the need for designs offering memory scalability, rich interface functions and lower power consumption has grown.

Features:

In addition to standard peripheral IP enhancements, TMPM36BFYFG consumes only 2/3 of the power requirements of equivalent products, the result of a review of the internal design. The TMPM36BFYFG can contribute to reducing energy consumption of the entire system through bus architecture optimization. The new microcontroller is an ideal system controller for home appliances, control instruments and the sub-systems of computer peripherals, office automation equipment and automated factory machinery, as it is equipped with a rich communications interface, a multi-purpose timer for motor control and IGBT control. Toshiba will expand its line of dedicated products with the new device.

Applications:

White goods, health-care equipment, computer peripherals, monitors, communication equipment, printers, point-of-sale terminals, home energy management system and industrial machinery are just a few of the potential applications of the TMPM36BFYFG.

 

Outline and Features

Product number   TMPM36BFYFG
Sample price

(included tax)

500 yen
Production start time November 2013
Schedule production quantity One million per month
Main specifications

CPU: Cortex™-M3
Maximum operating frequency: 80MHz
On-chip memory: Flash 256Kbytes, SRAM 66Kbytes
Communication I/F: I2C/SIO 3 channels, SIO/UART 4 channels,

Full UART 2 channels, SPI 3 channels
DMA: 32 channels (2 units)
16-bit timer: 8 channels
Multi-purpose timer: 4 channels (Three-phase PWM control and IGBT control)
AD converter: 12-bit successive-approximation type 16 channels (1µsec conversion)
Remote control reception: 1 channel (block reception supported)
External memory bus: available (multiplex connection 8 bit/16 bit)
Real-time clock: 1 channel
Watchdog timer: 1 channel
Power-supply voltage: 2.7V through 3.6V (single power supply)
Package: LQFP100 (14mm x 14mm, 0.5mm pitch)

Note   DMA: Direct Memory Access

The calculated size for 1KB is 1024bytes.

 

1 | 2  Next Page »



Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise