AWR and Cree Present Webinar on Designing Class F PAs Using Cree GaN HEMTs and AWR Design Software

EL SEGUNDO, Calif. – March 19, 2013

What: AWR Corporation and Cree Inc. invite power amplifier (PA) designers to learn more about the design of Class F, inverse Class F, and continuous Class F power amplifiers using Cree GaN HEMTs and AWR’s Microwave Office® circuit design software. Hosted by Microwave Journal, this hour-long webinar takes place on Tuesday, March 26 at 11:00 a.m. EDT. It focuses on the design of power amplifiers employing gallium nitride (GaN) high electron mobility transistors (HEMTs) to maximize power added efficiencies (PAEs) and how Microwave Office software can be used to optimize source and load-pull at both fundamental and harmonic frequencies.

Where:  For details and to register, visit http://www.microwavejournal.com/events/1021

When:  
Tuesday, March 26, 11:00 a.m. EDT

###

© 2013 AWR Corporation. All rights reserved. AWR and Microwave Office are registered trademarks and the AWR logo is a trademark of AWR Corporation. Other product and company names listed are trademarks or trade names of their respective companies.

Contact:
Sherry Hess
AWR Corporation
Vice President of Marketing
(310) 726-3000
Email Contact

 




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Jobs
Sr. Mechanical Engineer for Kateeva at Newark, CA
MECHANICAL ENGINEER for Peter R. Thom and Associates at ORINDA, CA
Mgr Mechanical Engineering 2 for Northrop Grumman at Melbourne, FL
Geospatial Intelligence Analyst for Quick Services LLC at Fort Bragg, NC
Geospatial Analyst for Vencore at Suitland, MD
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise