STMicroelectronics Makes Leading-Edge MEMS Technology Available for Prototyping Through CMP

GENEVA and GRENOBLE, FRANCE -- (Marketwire) -- Mar 19, 2013 -- STMicroelectronics (NYSE: STM) and CMP (Circuits Multi Projets®) today announced that ST's THELMA MEMS manufacturing process, the process ST uses for its industry-leading accelerometers and gyroscopes, which have shipped in billions of units[1], is now available for prototyping to universities, research labs and design companies through the silicon brokerage services provided by CMP. ST is releasing this process technology to third parties as a prototyping and foundry service to encourage new developments in motion-sensing applications for consumer, automotive, industrial and healthcare markets.

ST's long-term success in MEMS (Micro-Electro-Mechanical Systems) sensors has drawn upon Company-developed industry-leading manufacturing processes. The 0.8-micron, surface micro-machining THELMA (Thick Epitaxial Layer for Micro-gyroscopes and Accelerometers) process combines variably thick and thin poly-silicon layers for structures and interconnections. This enables the integration of linear and angular mechanical elements in a single chip, delivering significant cost and size benefits to customers.

The CMP multi-project wafer service allows organizations to obtain small quantities -- typically from a few dozens to a few thousand units -- of advanced ICs manufactured using the same process technologies as would be used on much higher-volume products. The THELMA process design rules and design kits are now available for universities and microelectronics companies and the first requests are already being answered.

The introduction of ST's MEMS manufacturing process in CMP's catalogue builds on the successful collaboration that has allowed universities and design firms to access ST's semiconductor manufacturing processes from the 130nm CMOS, introduced in 2003, up to the 28nm FD-SOI technology, released for prototyping in late 2012, which enables the efficient design of next-generation mobile devices that simultaneously require high performance and low power consumption.

"The small-scale availability of our industry-leading MEMS process alongside CMOS technologies including the game-changing FD-SOI, complemented with CMP's advanced service capabilities, offers unprecedented access to state-of-the-art in chip manufacturing for start-ups and R&D labs looking to design intelligent sensor systems," said Benedetto Vigna, Executive Vice President, General Manager, Analog, MEMS & Sensors Group, STMicroelectronics. "With leading-edge industrialized processes at their fingertips, innovators can now concentrate on developing new products rather than investing time and resources in developing technologies."

"Anticipating huge development in MEMS, CMP was the first silicon brokerage service in the world to offer MEMS technologies as early as in 1995," said Bernard Courtois, Director of CMP. "Today, CMP is expanding the very successful ST partnership to the THELMA process, offering both the CMOS part and the MEMS part from a single manufacturer. Going beyond inertial sensors, pressure sensors, microphones, e-compasses etc., the ST-CMP partnership will allow CMP customers to move towards complex, embedded systems, addressing more and more societal needs, as components of the Internet of Things."

Perspectives on Smart Systems for the Internet of Things will be presented later today by ST's Benedetto Vigna in his opening keynote address at the DATE (Design, Automation & test in Europe) event in Grenoble, France. ( http://www.date-conference.com/).

About STMicroelectronics
ST is a global leader in the semiconductor market serving customers across the spectrum of sense and power and automotive products and embedded processing solutions. From energy management and savings to trust and data security, from healthcare and wellness to smart consumer devices, in the home, car and office, at work and at play, ST is found everywhere microelectronics make a positive and innovative contribution to people's life. By getting more from technology to get more from life, ST stands for life.augmented.

In 2012, the Company's net revenues were $8.49 billion. Further information on ST can be found at www.st.com.

About CMP
CMP is a broker in ICs and MEMS for prototyping and low volume production. Circuits are fabricated for Universities, Research Laboratories and Industrial Companies. Advanced industrial technologies are available in CMOS, BiCMOS, SiGe BiCMOS, High Voltage, FD-SOI down to 20nm, pHEMT GaAs, and MEMS etc. CMP distributes and supports several CAD software tools for both Industrial Companies and Universities. Since 1981, more than 1000 Institutions from 70 countries have been served, more than 6,000 projects have been prototyped through 700 runs, and 60 different technologies have been interfaced. For more information, visit: http://cmp.imag.fr

[1] ST is the world's top MEMS manufacturer with cumulative shipments of more than three billion MEMS devices, production capacity of 4 million devices a day, and, according to Yole Developpment, the first company to reach $1 billion in MEMS sales

ST MEMS Process at CMP: http://hugin.info/152740/R/1686205/552671.pdf
ST MEMS Process at CMP_IMAGE: http://hugin.info/152740/R/1686205/552672.jpg

For Press Information Contact:

STMicroelectronics
Michael Markowitz
+1 781 591 0354

Email Contact

CMP
Bernard Courtois
+33 4 76 57 46 15

Email Contact 





Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise