Toshiba Expands Line-up of CMOS-LDO Regulator ICs for Mobile Devices

Adds 300mA single output product with low drop-out, low output noise and high-speed load transient response in an SMV package to line-up

TOKYO — (BUSINESS WIRE) — March 13, 2013Toshiba Corporation (TOKYO:6502) has expanded its line-up of CMOS-LDO regulator ICs for mobile devices with the 300mA single output "TCR3DF Series", which delivers low drop-out, low output noise and high-speed load transient response characteristics. Samples will be available in April with mass production scheduled to start in May.

Toshiba CMOS-LDO Regulator IC for Mobile Devices (Photo: Business Wire)

Toshiba CMOS-LDO Regulator IC for Mobile Devices (Photo: Business Wire)

The new line-up covers a range of voltage-clamp type output voltages, from 1.0V to 4.5V, in a SMV (SOT-25: 2.9 x 2.8 x 1.1 mm) package. With additional features of inrush current limit, over-current protection, and over-temperature protection, the devices offer the high performance characteristics required in analog circuits

The new CMOS-LDO regulators are suited for use in a wide range of mobile devices, such as smartphones, mobile phones, tablets, notebook PCs, digital cameras and digital video cameras.

Applications

Mobile devices such as smartphones, mobile phones, tablets, notebook PCs, digital cameras and digital video cameras.

Key Features

1.   Low drop-out voltage

VIN-VOUT =230mV (typ.) at 2.5V output, IOUT =300mA

2. Low output noise voltage

VNO =38μVrms (typ.) at 2.5V output, IOUT =10mA, 10 Hz < f < 100kHz

3. Voltage-clamp type output voltage can be set between 1.0V and 4.5V in increments of 50mV.
4. Low bias current (IB =65μA (typ.) at IOUT =0mA)
5. Excellent load transient response characteristics

ΔVOUT = ±85mV(typ.) at IOUT = 1 ⇔ 300mA, COUT =1.0μF

6. Over-current protection
7. Over-temperature protection
8. Inrush current limit
9. Output auto-discharge
10. Pull-down control terminal connection
 

Lineup

Part number   Output voltage (V)
TCR3DF10 1
TCR3DF105 1.05
TCR3DF12 1.2
TCR3DF15 1.5
TCR3DF18 1.8
TCR3DF28 2.8
TCR3DF29 2.9
TCR3DF30 3
TCR3DF31 3.1
TCR3DF33 3.3
TCR3DF36 3.6
TCR3DF45   4.5
 

1 | 2  Next Page »



Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Hexagon’s Recent Ups & Downs Update
Jobs
Solidworks Product Designer for NASCENT Technology at Charlotte, NC
SYSTEMS INTEGRATOR for Palm Beach County Human Resources at West Palm Beach, FL
Developer-Support-Implementation Engineer for EDA Careers at San Francisco Area, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
PMTS 2017 at Greater Columbus Convention Center Exhibit Halls E, F, & D 400 North High St. Columbus OH - Apr 25 - 27, 2017
AI·GI·CRV Conference 2017 at Edmonton, Alberta Canada - May 16 - 19, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise