REMINDER: Reflex CES Demonstrates SoC FPGA-Based System-on-Module at Embedded World 2013; Highlights Prototyping Platform, Recorders, Customizable Rugged Systems

NUREMBERG, GERMANY -- (Marketwire) -- Feb 21, 2013 --


Who
At Embedded World 2013, Reflex CES, a provider of custom embedded and complex systems, will highlight its System-on-Module (SOM) design expertise with a video, and demonstrate its new FPP25 FPGA prototyping platform, rugged embedded systems, and new high-speed data recorders.

What: Video & Demonstrations at Embedded World
SoC FPGA-based SoM
Reflex CES uses its expertise in SoM solutions based on FPGA and SoCs to accelerate its customers' design productivity. A video demonstration based on a SoC module and an evaluation board using a Xilinx Zynq FPGA will highlight the company's baseboard design, custom embedded design (system, board, firmware and software) and manufacturing capabilities.

Fast Prototyping Platform
The Reflex CES FPP25 platform offers a fast ASIC/SOC prototyping platform based on Xilinx Virtex-7 2000T FPGAs and automatic partitioning for emulating designs of up to 25-million ASIC gates using a stand-alone system. It gives design engineers an easy-to-use, next generation platform to speed up validation and verification of their complex, high-density digital designs.

Rugged Systems
Reflex CES will showcase examples of customizable embedded systems that use rugged VPX and CompactPCI boards.

High-Speed Data Recorders
Reflex CES will demonstrate high-speed data recorders based on PCIe x8 GEN 2 architecture with customizable and removable cartridges. The recorders target laboratory developed rugged embedded systems used for video, telecommunications or custom data recording. They offer 1.6GBps of bandwidth in recording mode and fit in a large range of acquisition boards using PCIe bus interfaces.

When/Where
Video and Demonstrations:
10:00 to 18:30, Tuesday, February 26
10:00 to 18:00, Wednesday, February 27
10:00 to 16:00, Thursday, February 28
NürnbergMesse, Hall 1, Booth 1-103
Nuremberg, Germany

Information and Registration
To schedule a meeting with Reflex CES, please email Email Contact.
For more information about Reflex CES, please visit www.reflexces.com.
To register for Embedded World, please visit http://www.embedded-world.de/en/.

About Reflex CES
Reflex CES designs and manufactures high-speed boards and rugged systems based on high-density FPGAs that significantly reduce its customers' technology risks. The company provides custom embedded and complex systems, and specializes in Modified-Off-The-Shelf (MOTS) solutions for VPX/OpenVPX, CompactPCI, VME rugged systems, embedded systems, industrial systems, high-speed boards, FPGA boards and PCIe boards. Its expertise spans from chip-level and software-level designs up to complete system-level designs, manufacturing, and production of small and medium series of turn-key systems targeting customers in the military/aerospace, defense, telecommunications, medical and industrial sectors. For more information, please visit http://www.reflexces.com/en/.

All trademarks and trade names are the property of their respective owners.

Add to Digg Bookmark with del.icio.us Add to Newsvine

Press Contacts
Europe:
Chantal Cochini
l'Ops PR
+33(0)6 22 98 03 80

Email Contact

US:
Georgia Marszalek
ValleyPR LLC
+1 (650) 345-7477

Email Contact 





Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise