Laser Sintering is Replacing Traditional Processes in Dental Industry

Additive manufacturing systems from EOS rapidly gaining market acceptance


 

Novi, Mich., Feb. 19, 2013—Until recently, laser sintering of parts and implants for dental units was uncommon. Today the technology is on its way toward widespread acceptance: EOS, the technology and market leader for design-driven, integrated e-Manufacturing solutions for Additive Manufacturing (AM), estimates that in the past six years about fifty million laser-sintered dental crowns, copings, and bridges have been created in over 60 direct metal laser-sintering (DMLSTM) systems worldwide. In some countries, EOS’ market share for metal (primarily cobalt chrome) dental units is 80 to 100 percent.

EOS will be discussing this trend at LAB DAY CHICAGO 2013 (held at the Sheraton Chicago Hotel & Towers, Feb. 22-23), illustrating the market transition with a display of crowns, copings, bridges, titanium implants, and plastic dental models—all made using laser sintering.

In addition, at LAB DAY, EOS will provide a sneak peak of its partial application. EOS and its partners in the dental industry are currently working on manufacturing a certified cobalt chrome partial that will officially debut at the International Dental Show (IDS) in Cologne, Germany this March. In plastic laser sintering, EOS has recently rolled out its new FORMIGA P 110, a system suitable for making dentition models out of a specially customized polyamide, PA 2105. Such models are required where ever intraoral scanners are used.

Laser sintering will produce even more dramatic changes to the dental market in the decades ahead. “Our present product line supporting lost wax is probably going to be obsolete in ten to fifteen years,” predicts Bill Oremus, president of Rhode Island-based BEGO USA, a division of 113-year-old German dental giant BEGO GmbH. “The end of casting is approaching as the application of additive manufacturing to dentistry begins to alter the landscape.”

The high quality, durability, and cost-effectiveness of laser-sintered products led BEGO USA to purchase an EOSINT M 270 two years ago. “The U.S. market is primed to take advantage of the cost and time savings that additive manufacturing can provide,” Oremus says.

“Any lab that uses our DMLS system at or near capacity to make dental units can get the best cost-to-part ratio in the industry,” says Thomas Thiel, a Medical Dental Technologist and an engineer in EOS’ dental applications division. “With DMLS, you can make 450 copings and bridges in a day, whereas a dental technician using lost wax casting might make 20.”

During the LAB DAY show, Thiel is presenting two sessions of an accredited clinic titled, “Producing Bridges, Copings, Partials, Implants and Models from CAD Data via Laser Sintering.” In them, he explains how to produce units for crowns and bridges using a DMLS system running unattended. He also discusses the manufacture of implants, the new partial application with DMLS, and the use of plastic laser sintering to make models.

These clinics are approved for 1.5 Scientific Certified Dental Technician credits. There are two sessions, both on Saturday in Parlor G, Lobby Level, at 1:30-3:00 p.m. and 4:00-5:30 p.m. For more information regarding these clinicals, contact EOS at 248-306-0143 x8104.

For additional information on LAB DAY CHICAGO, go to http://www.lmtmag.com/lmtlabday

About EOS

Founded in 1989 and headquartered in Germany, EOS is the technology and market leader for design-driven, integrated e-Manufacturing solutions for additive manufacturing (AM, or “Industrial 3D Printing”). EOS offers a modular solution portfolio including systems, software, materials and material development as well as services (maintenance, training, specific application consulting and support). As an industrial manufacturing process it allows the fast and flexible production of high-end parts based on 3D CAD data at a repeatable industry level of quality. As a disruptive technology it paves the way for a paradigm shift in product design and manufacturing. It accelerates product development, offers freedom of design, optimizes part structures, and enables lattice structures as well as functional integration. As such, it creates significant competitive advantages for its customers. For more information please visit www.eos.info.

 

Contacts

 

EOS Electro Optical Systems GmbH

Claudia Jordan

Public Relations Specialist

Phone: +49 (0) 89 893 36 x2134

e-mail: Email Contact

 

EOS of North America, Inc.

Electro Optical Systems

Jessica Nehro

Field Marketing Manager

Phone: +1 248 306 0143 x8104

Fax: +1 248 306 0298

e-mail: Email Contact

 

Parker Group (editorial US)

Nick O’Donohoe

Phone: +1 401 272 1510

e-mail: Email Contact




Review Article Be the first to review this article

Jobs
Mechanical Engineer for Lockheed Martin at Littleton, CO
Purchasing/Supplier Preparation and Development Specialist for HINO Motors USA at Farmington Hills, MI
Development Officer - Housing: Policy and Planning for City of San Jose at San José,, CA
BIM/ Revit Specialist for MacDonald-Miller Facility Solutions at Moses Lake, WA
Oil & Gas Pipeline Engineer for CH2M HILL at Englewood, CO
Upcoming Events
IMTS 2016 at Chicago IL - Sep 12 - 17, 2016
3D Printing Applications for Product Design & Manufacturing at 480 Smithe St. Unit 103 Vancouver BC Canada - Sep 15, 2016
2016 South Florida GIS Expo at 650 Okeechobee Boulevard West Palm Beach FL - Sep 29 - 30, 2016
PLM Components Innovation Conference at Aloft Boston Seaport 401-403 D St Boston MA - Oct 11 - 12, 2016
TurboCAD pro : Limited Time offer



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise