Atmel Launches Unique Two-Channel LED Drivers for High CRI Professional and Consumer Lamps

MSL2021/23/24 Devices Deliver High Light Quality for Warm White High Color Rendering Index (CRI) LED Lamps with Industry's Most Efficient Power Management and Lowest Component Count

SANTA CLARA, Calif., Feb. 12, 2013 — (PRNewswire) — �Strategies in Light - Atmel® Corporation (NASDAQ: ATML), a leader in microcontroller (MCU) and touch solutions, today announced three new two-channel solid state lighting (SSL) LED drivers that provide accurate color control for two-color LED light engines. In addition, the LED drivers deliver the most efficient power management, with the lowest component count, for high CRI LED lamps.

Ideal for applications including general lighting, residential and commercial lighting, architectural lighting, and mood lighting, the LED drivers consist of the Atmel MSL2021, MSL2023, MSL2024; all can be accompanied with an Atmel AVR®  MCU or ARM® processor-based MCU for a complete system solution in a variety of luminaires and lamp configurations.

The new MSL2021/23/24 LED devices have several distinct advantages when compared to existing LED drivers:

  • The devices drive one dominant LED string with a linear controller and one color LED string with a low-side buck controller to achieve the target correlated color temperature (CCT) coordinate, and replicate the color spectrum to attain a high CRI value.
  • The devices have a look-up table in the EEPROM so designers can program accurate profiles to follow the desired CCT compensation curve, lowering the overall bill of materials (BOM) cost.
  • The linear controller for white LEDs in the device family adaptively controls the headroom of any AC/DC or DC/DC, isolated or non-isolated topology, while external MOSFETs give designers the flexibility of choosing LED currents and LED string lengths.
  • There are several dimming options and I2C interface for additional flexibility and control.

"White point control of an LED lamp is a key challenge for designing high-performance general, architectural or mood lighting," said Tushar Dhayagude, Director of LED Products, Atmel Corporation. "The MSL2021/23/24 LED devices address this key issue by enabling the control of two strings, typically comprising of white and red or amber LEDs, to provide precise white color control, while providing extraordinary power efficiency, flexibility and wide power levels for the lamps."

Key features for the three new devices include:

  • MSL2021 -- the first LED driver with integrated temperature compensation for the color LED string
  • MSL2023 -- offering I2C serial port and internal pulse-width modulation (PWM) generators
  • MSL2024 -- featuring individual PWM input pins

Pricing and Availability
The new devices are available now. Pricing for 1,000-piece quanties follows:

  • MSL2021 starts at USD $3.10
  • MSL2023 starts at USD $2.74
  • MSL2024 starts at USD $2.52

To accelerate a design, evaluation kits are also available through your local sales representative. The new kits include an isolated AC/DC power supply, an integrated LED load board with one white and red LED string, and an on-board AVR MCU to I2C to USB/parallel bridge for programming the LED driver.

More Information
Atmel MSL2021/23/24 LED Drivers: www.atmel.com/Microsite/msl2021_msl2023_msl2024_led_drivers/default.aspx 
Atmel YouTube Channel: www.atmel.com/youtube 
Embedded Design Blog: www.atmelcorporation.wordpress.com 
Twitter: www.atmel.com/twitter 
LinkedIn: www.atmel.com/linkedin 
Facebook: www.atmel.com/facebook 

About Atmel
Atmel Corporation (Nasdaq: ATML) is a worldwide leader in the design and manufacture of microcontrollers, capacitive touch solutions, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on industrial, consumer, communications, computing and automotive markets.

© 2013 Atmel Corporation. All Rights Reserved. Atmel®, Atmel logo and combinations thereof, AVR®, and others are registered trademarks, or trademarks of Atmel Corporation or its subsidiaries. ARM® is a registered trademark of ARM Ltd. Other terms and product names may be trademarks of others.

Disclaimer
No representation or warranties are made concerning third-party patents with regard to the use of Atmel® products. The mixing of red LEDs with phosphor-converted LEDs may be protected by certain third-party patents, such as U.S. Patent No. 7,213,940 and related patents of Cree, Inc.

Press Contact:

Agnes Toan, PR Manager

Tel: (+1) 408-487-2963, Email: Email Contact

SOURCE Atmel Corporation

Contact:
Atmel Corporation
Web: http://www.atmel.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise