WorkNC CAD-CAM delivers over 20 years of productivity for German toolmaker

February 4, 2013 - German toolmaker Riemann Gmbh has been using WorkNC automatic CAD-CAM since the 1980s. Founder, Klaus Riemann recalls, “ At the time we had two or three CAD-CAM software demonstrations and WorkNC was the only software that impressed us. We could easily select a wide range of milling strategies and automatically generate reliable NC code, and it was extremely easy to use. Two days training and we could get started.” Since the 1980’s, the machinery used and WorkNC have naturally evolved. Riemann now uses the latest 64 bit parallel processing version of WorkNC to automatically and rapidly program its advanced 3, 4, and 5-axis machines.

Riemann specializes in stamping and forming tools for the automotive industry for components such as seats and exhaust manifolds, providing a service from tool design through to machining and testing. Where it does not have the facilities in house, it works with partner companies to deliver a complete service package.

The company has made a considerable investment in milling capability and has settled on DMG / MORI SEIKI as its preferred machinery supplier. It has a 3-axis DMU 125T and several 5-axis machines including a DMC 75V, two DMU 200Ps and a 6 meter DMU 600P. Rene Luttmann, Project Manager says, “ 5-axis milling is standard practice nowadays. We generally cut as much as we can in 3-axis at each 5-axis inclined position. Continually rotating our heavy workpieces would greatly slow down machining. Firstly, we machine the base of the tool and then change the setup so that we can machine all the other geometry and contoured 3D surfaces in one operation, significantly reducing our cycle times.

The company’s WorkNC programmer, Mark Hildebrandt starts with CAD files from CATIA V5 and uses his expertise to optimize the WorkNC cutting paths for speed and quality. “ One reason why we have been working with WorkNC for over 20 years is the large number of efficient milling strategies included in the software. In particular, we find the rest material cycles extremely practical and efficient, as they avoid air cuts and shorten machining times.” WorkNC makes it easy to fine-tune NC programs. He continues, “I can edit milling programs and cut and paste elements, such as a proven milling strategy, into a new program.

Recently, Riemann has added WorkNC’s automatic feature recognition for hole drilling. Rene Luttmann says, “ Stamping tools have a considerable number of holes and we can automatically cut these in WorkNC. First, the software finds the hole features and coordinates from the CAD data. Next, it generates tailored machining strategies which use the tools that are actually available. This minimizes the number of cutters we need to stock and eliminates the possibility of an error, delivering valuable cost and time savings.”

The DMU 600P has greatly expanded the capacity at Riemann, which now offers subcontract machining services as well as tool making. It can now handle workpieces up to 40 tons using simultaneous 5-axis machining strategies. Klaus Riemann says, “ We purchased the machine to meet our tool making needs, but its 6 meter travel also enables us to machine any huge component with 3D contours from several sides without reclamping. With these techniques and WorkNC’s 5-axis strategies we can easily save two hours of setup time. The demand for very large parts is increasing and previously we delivered it using external service providers, which was both expensive and complicated. The in-house capacity we now have is not very common so we are delighted that we can offer our customers these new capabilities.”

As well as WorkNC, Riemann also uses WorkXPlore 3D high speed 3D viewer. This system enables many more people within the company to simultaneously access and interrogate the design data. It can quickly handle and manipulate very large CAD files from leading design systems and is used by the company for purchasing, quotations, sharing data on the shop floor and, in parallel with the CAD system, for tool design.

Read online
About WorkNC :

Please do not hesitate to contact us should you require further information

Email Contact

Review Article Be the first to review this article

Featured Video
Body Structure Engineer (Entry Level) for HATCI at Superior Twp, California
GIS Specialist for Olsson Technology at Overland park, Kansas
GIS Specialist for ERDMAN at Madison, Wisconsin
Upcoming Events
R&D 100 Conference & Awards 2018 at Waldorf Astoria Orlando Orlando FL - Nov 15 - 16, 2018
Scilab Conference at Mozilla Paris 16 Bis Boulevard Montmartre Paris France - Nov 20, 2018
PI Marine 2018 at Hamburg Germany - Nov 27 - 28, 2018
2018 Simcenter Conference - Europe at Hilton Prague Pobrezni 1 Prague Czech Republic - Dec 3 - 5, 2018
Kenesto: 30 day trial
SolidCAM: See It Live

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise