Capital Pro-Égaux Inc. announces the conclusion by its wholly owned subsidiary Technique d'usinage Sinlab Inc. of two license agreements for its Technobar and guide patents

LACHENAIE, QC, Nov. 21, 2012 /CNW Telbec/ - Capital Pro-Égaux Inc. (the "Company") (NEX: CPE.H) is pleased to announce the signature by its wholly owned subsidiary, Technique d'usinage Sinlab Inc. ("Sinlab"), of two license agreement granting non-exclusive rights to certain patents relating to its Technobar and Technoguide technologies.

Under one of the license agreements, the Company has granted to Utah-based corporations Delcam USA, Inc. and Delcam Holdings, Inc. ("Delcam"), non-exclusive rights to the certain patents relating to the Technobar and Technoguide for the entire patent term in consideration for a lump sum payment not exceeding $50,000. Delcam is authorised under the license agreement to make, use, have made, import, export, market, distribute, sell and offer for sale licensed products (which include any computer system or hardware product, including but not limited to Delcam's, Dent CAD PRO and DentSCAN or other software and hardware products related thereto that would infringe on a claim of a licensed patent) within the license territory of the world.

Under another other license agreement, the Company has granted to Tennesse-based Cagenix, Inc. ("Cagenix"), in settlement of certain patent litigation, non-exclusive rights to certain patents relating to the Technobar and Technoguide for the entire patent term in consideration for certain lump sum payments over time not exceeding in the aggregate $125,000 and certain annual royalties expected at this time not to exceed approximately $75,000. Under the terms of the licence agreement, Cagenix will have the right to exploit the licensed products (which include any product, product line, service, device, system, component, hardware, software, any combination of the foregoing, or other offering that is designed, branded, made, used, sold, offered for sale, leased, purchased, licensed, imported, exported, supplied or otherwise provided by Cagenix or an affiliate thereof that would infringe any claim of the Sinlab patents) worldwide.

Caution regarding forward-looking statements

This news release contains certain forward-looking statements regarding the Company's expectation of certain royalty payments to be received under the licence agreement with Cagenix. Such expectations are based on certain assumptions based on currently available information. If these assumptions prove incorrect, actual results may differ materially from those contemplated by the forward-looking statements contained in this press release. Factors that could lead actual results to differ include, among others, factors that may impact Cagenix's ability to make sales as contemplated, which include, amongst other, market acceptance for its products, competition, market and general economic conditions, demand fluctuations, labour relations, future funding, unfavourable regulations, lawsuits and legal challenges and other risks. The Company disclaims any intention or obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, other than as required by securities laws.

About Pro-Égaux Inc.

Pro-Égaux through its wholly owned subsidiary, Technique d'usinage Sinlab Inc., is a company based in Lachenaie, Quebec, specializing mainly in the conception and design of titanium products to be used in the dental prosthesis restoration industry.

Neither NEX, the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of NEX and the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE CAPITAL PRO-EGAUX INC.

Contact:

CAPITAL PRO-EGAUX INC.
Capital Pro-Égaux Inc.
Pierre Désormeau
President
Tel.: (514) 616-0612
Fax: (450) 226-1
pierredesormeau@sympatico.ca

 




Review Article Be the first to review this article
Rand3D

SolidCAM - Break The Chains

Featured Video
Jobs
System Designer/Engineer for Bluewater at Southfield, Michigan
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
4th International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2018) at Movenpick Hotel Amsterdam City Centre Amsterdam Netherlands - Sep 19 - 21, 2018
Kenesto: 30 day trial
MasterCAM



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise