Usability and Performance focus of CST STUDIO SUITE 2013

A m st erdam, The Netherlands, October 29 , 2012, Computer Simulation Technology (CST) will be previewing  CS T STUDIO  SUITE 201 3 and its new design environment at EuMW 2012, booth #217.

The increasingly complex tasks design engineers face today require a large number of sometimes specialised features.  Simulation software vendors such as CST have enhanced their tools to accommodate these requirements. The continuously extended feature set in CST STUDIO  SUITE® has resulted in an impressive number of settings and options for the engineer to choose from. CST STUDIO  SUITE 2013 has undergone a major redesign in order to escort the engineer on his way through his simulation projects.

This guidance starts directly after opening the software.  A project wizard helps set-up the software to meet a particular application type’s requirements and provide the relevant results. This configuration can be modified by the user based on the experience gathered on-site to deal with the specific application characteristics. The modified configuration can be stored and reused easily.

A very significant and obvious change in the user interface is the introduction of the Ribbon. The Ribbon, as implemented in CST STUDIO  SUITE, not only groups features and menus, it also guides the engineer through the simulation process, only showing the currently active or relevant options.

The performance improvements in CST STUDIO  SUITE are manifold and stretch over the entire range of solvers. The CST MICROWAVE STUDIO® (CST MWS®) transient solver, for example, benefits from a quicker matrix set-up, the solver runs faster employing the latest Intel®  technology, and is able to deal with larger problems.

“With CST STUDIO  SUITE 2013 we are responding to our customer wishes for an easier workflow without sacrificing the functionality or versatility of our software,” said Dr. Martin Timm, Marketing Director, CST. “Besides this, we have kept our focus on performance improvement.  To provide efficient and well integrated solutions is key to our company’s success.”

H i g h l i g ht s o f CST STUDIO  SUITE 2013

  • General
    • Ribbon based user interface
    • Project wizard
    • Automatic storage of parametric results
    • Cylinder scan for farfields of all solvers
  • CST MWS transient solver
    • Faster, more memory efficient mesh generation
    • Kernel optimized for latest processor generation
    • Non-linear, frequency dependent materials, for example Kerr and Raman materials
    • More than 2 billion mesh cells
    • GPU acceleration for TLM solver
  • CST MWS frequency domain solvers
    • Curved tetrahedrons now default
    • Improved mesh set-up
    • Improved performance and memory efficiency
    • Efficient Eigenmode-solver for lossy dielectrics
  • CST MWS asymptotic solver
    • Range profiles for RCS
    • Improved automation for model set-up and result creation
    • GPU support for particle-in-cell simulation

Av ailability

CST STUDIO  SUITE 2013 is scheduled for release end Q. 1 2013.

A bout C S T

CST develops and markets high performance software for the simulation of electromagnetic fields in all frequency bands. Its success is based on the implementation of leading edge technology in a user-friendly interface. CST’s customers are market leaders in industries as diverse as Telecommunications, Defense, Automotive, Electronics, and Medical Equipment. Today  CST employs 200 sales, development, and support personnel, and enjoys a leading position in the high frequency 3D EM simulation market.

CST STUDIO  SUITE is the culmination of many years of research and development into the most accurate and efficient computational solutions for electromagnetic designs. It comprises CST’s tools for the design and optimization of devices operating in a wide range of frequencies - static to optical. Analyses may include

Phone: +49 6151 7303 0 | Fax: +49 6151 7303 100 | Email Contact|





thermal and mechanical effects, as well as circuit simulation. CST STUDIO  SUITE benefits from an integrated design environment which gives access to the entire range of solver technology. System assembly and modeling facilitates multi-physics and co-simulation as well as the management of entire electromagnetic systems. CST STUDIO  SUITE can offer considerable product to market advantages such as shorter development cycles, virtual prototyping before physical trials, and optimization instead of experimentation.



Further information about CST is available on the web at http://







F or further information p l e a s e c on t a c t :


Ruth Jackson, Communications Manager, CST Tel: +49 6151 7303-752

Email: Email ContactWeb:







Tr a d e m a r k s


CST, CST STUDIO  SUITE, CST MICROWAVE STUDIO,  CST EM STUDIO,  CST PARTICLE STUDIO,  CST CABLE STUDIO, CST PCB STUDIO,  CST MPHYSICS STUDIO, CST MICROSTRIPES, CST DESIGN STUDIO, CST BOARDCHECK, PERFECT BOUNDARY APPROXIMATION (PBA), and the CST logo are trademarks or registered trademarks of CST in North America, the European Union, and other countries. Other brands and their products are trademarks or registered trademarks of their respective holders and should be noted as such.



1 | 2  Next Page »

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
GIS Analyst for City of Elk Grove at Elk Grove, CA
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Colortrac: LearnMore
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise