Tanner EDA Sponsors MEMS Partner Event in Israel

IMH, Maradin, Rafael, SoftMEMS, Technion, Tel Aviv University and Tower Jazz to present

MONROVIA, California – October 23, 2012 – Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal integrated circuits (ICs), and Israeli distributor New ARTech Technologies will hold a day-long conference on micro-electro-mechanical systems (MEMS) in Israel on 30 October 2012. This conference will feature presentations by Tanner EDA customers and partners along with briefs on Tanner EDA and SoftMEMS tools. SoftMEMS provides the CAD design environment used for the development and test of MEMS products.

More MEMS designs are created with Tanner EDA tools than with any other EDA tools. Six Tanner EDA customers will give presentations at the conference and technical sessions will be held on Tanner EDA MEMS design tools and SoftMEMS tools. Presenting companies include Israel MEMS House (IMH), Maradin, Rafael, and TowerJazz along with Technion (Israel Institute of Technology) and Tel Aviv University.

AGENDA:

09:00-10:00     Registration (coffee &breakfast) & demos of Tanner EDA & SoftMEMS tools

10:00:10:30     Welcome:  Roni Amir—GM, ARTech and Greg Lebsack--President, Tanner EDA

10:30-11:00     Matan Naftali—CEO, Maradin

11:00- 11:30    Tanner EDA MEMS design tools---Dr. Massimo Sivilotti, Chief Scientist, Tanner

                        Research

 11:30-12:30    SoftMEMS tools – Dr. Mary Ann Maher, CEO, SoftMEMS

12:30-13:00     Presentation -- Prof. Nir Tessler, Technion

13:00-14:00     Lunch/networking

14:00-14:30     Solutions demonstrations: Tanner EDA& SoftMEMS

14:30-14:50     Customer presentation: Tower Jazz

14:50-15:10     Customer presentation: IMH

15:10 -15:30    Customer presentation: Tel Aviv University

15:30-16:00     Customer presentation: RAFAEL

16:00-16:30     Q&A and wrap up

WHEN: Tuesday, 30 October 2012, from 0900-1630 hrs.

WHERE: Dan Caesarea hotel, midway between Tel Aviv and Haifa, Israel

REGISTRATION:  To register email Roni Amir at Email Contact

About SoftMEMS 

SoftMEMS CAD Design Environment is used for the development and test of MEMS products. The tools are open-platform software products that support leading electronic design automation (EDA) environments used for integrated circuit (IC) development. Their tools allow data sharing among system designers, IC designers, process engineers and MEMS experts, permitting early and consistent design checks among multidisciplinary teams and allowing designers to easily develop new MEMS designs, integrate existing designs (intellectual property) into systems, and couple them with electronics. SoftMEMS design tools include MEMS Xplorer (for UNIX and HP platforms) and MEMS Pro (for the PC platform).

About New ARTech Technologies

New ARTech Technologies represents several semiconductor (system-on-chip, FPGA, and ASIC) and system companies in Israel. Partners include companies with solutions in intellectual property (IP) cores, EDA tools, design services, precision navigation and power. Since 2003, New ARTech has been helping to ensure that customers are fully equipped to meet their development and production needs together with their business objectives. The company is based in Herzelia Pituach, Israel.

About Tanner EDA

Tanner EDA provides a complete line of software solutions that catalyze innovation for the design, layout and verification of analog and mixed-signal (A/MS) integrated circuits (ICs) and MEMS. Customers are creating breakthrough applications in areas such as power management, displays and imaging, automotive, consumer electronics, life sciences, and RF devices. A low learning curve, high interoperability, and a powerful user interface improve design team productivity and enable a low total cost of ownership (TCO). Capability and performance are matched by low support requirements and high support capability as well as an ecosystem of partners that bring advanced capabilities to A/MS designs.

Founded in 1988, Tanner EDA solutions deliver just the right mixture of features, functionality and usability. The company has shipped over 33,000 licenses of its software to more than 5,000 customers in 67 countries.

 

Media Contact:

Linda Marchant,
Cayenne Communication,
919-451-0776,
Email Contact




Review Article Be the first to review this article
Rand3D

Autodesk University 2017

Featured Video
MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Jobs
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
GIS Software Developer for UDC at Englewood, CO
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
GIS Analyst for G2 Partners LLC at San Ramon, CA
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Structural Engineer for Albert Kahn and Associates at Detroit, MI
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise