MSC Software’s Adams plays Key Role in Curiosity’s Descent & Landing on Mars

SANTA ANA, CA--(Business Wire – August 17th, 2012) – MSC Software Corporation today announced that its Adams multibody dynamics software played a crucial role in enabling the extraordinary descent and landing of the Curiosity Rover onto Mars on Sunday evening (August 5th). A team of engineers at the NASA Jet Propulsion Laboratory (JPL) performed a series of critical computer simulations of the sky crane maneuver sequences. In graceful fashion, the JPL team successfully and precisely placed the rover onto the Red Planet, in what many are calling an “immense technical achievement.”

The computer simulations that JPL performed in Adams were essential to the mission. For instance, during the rover separation, they had to prevent the flight hardware from clashing or coming into contact with each other during the “two body phase” of the Descent Rate Limiter (DLR)/bridle deployment. Using Adams, the engineers were able to model and simulate this event, which was critical for them.


Curiosity's Seven Minutes of Terror (JPL)  

The dynamic event studies performed by the JPL team were unlike most performed for products functioning here on Earth. The team knew they needed to rely on computer simulations to study the extreme loading conditions that Curiosity potentially would face during the final descent, separation, and landing stages. Many conditions could not physically be tested anywhere on our own planet. The engineers dealt with complexities involving Martian gravity, atmosphere, surface slope, and landing velocities that could not be duplicated exactly here on Earth, and relied on the simulations to gain the insight they needed to feel confident in the execution of the mission. The series of Adams simulations took place in parallel with design – but it was insight from the simulations that helped guide the design to maturity, and to prevent any failures resulting from potentially harsh loading conditions during the mission.

In addition to the separation event, Adams simulations were used to study a complete series of events beginning with power descent to touchdown. The craft carrying the rover was traveling at a speed of 13,000 mph and had to decelerate to a speed at which the sky crane maneuver could lower the rover safely down onto the Mars surface. The team of engineers at JPL created several Adams sub-models including a high-fidelity detailed model of the rover itself. This effort was many times more difficult than that for previous rovers, and included development of a mobility deployment model, a model for the rover separation, and a model for touchdown.

“The employees at MSC are extremely proud of what the JPL team has accomplished,” said Dominic Gallello, CEO & President at MSC Software. “We congratulate the NASA team, and are delighted that our software supported such an extraordinary feat. It is always inspiring to acknowledge the ways in which our customers gain value from simulations, and at times even rely exclusively on the technology to execute sophisticated missions like Curiosity. It is an event we will always remember.”

 

About MSC Software

MSC Software is one of the ten original software companies and the worldwide leader in multidiscipline simulation. As a trusted partner, MSC Software helps companies improve quality, save time, and reduce costs associated with design and test of manufactured products. Academic institutions, researchers, and students employ MSC’s technology to expand individual knowledge as well as expand the horizon of simulation. MSC Software employs 1,100 professionals in 20 countries. For additional information about MSC Software’s products and services, please visit: www.mscsoftware.com

The MSC Software corporate logo, Simulating Reality, MSC Nastran, Adams, Actran, Dytran, Easy5, Marc, Patran, MSC, MasterKey, MasterKey Plus, Mvision, SimDesigner, SimManager, and SimXpert are trademarks or registered trademarks of the MSC Software Corporation in the United States and/or other countries. NASTRAN is a registered trademark of NASA. All other trademarks belong to their respective owners.

Press Contact:

Leslie Bodnar

Email Contact




Review Article Be the first to review this article
HP

Autodesk - DelCAM

Featured Video
Jobs
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Lead Geospatial Analyst for Alion at McLean, VA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Upcoming Events
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
PMTS 2017 at Greater Columbus Convention Center Exhibit Halls E, F, & D 400 North High St. Columbus OH - Apr 25 - 27, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise