North American Semiconductor Equipment Industry Posts July 2012 Book-to-Bill Ratio of 0.87

SAN JOSE, Calif. — August 16, 2012 — North America-based manufacturers of semiconductor equipment posted $1.28 billion in orders worldwide in July 2012 (three-month average basis) and a book-to-bill ratio of 0.87, according to the July Book-to-Bill Report published today by SEMI.  A book-to-bill of 0.87 means that $87 worth of orders were received for every $100 of product billed for the month.

The three-month average of worldwide bookings in July 2012 was $1.28 billion. The bookings figure is 10.2 percent lower than the final June 2012 level of $1.42 billion, and is 1.5 percent lower than the July 2011 order level of $1.30 billion.

The three-month average of worldwide billings in July 2012 was $1.48 billion. The billings figure is 3.9 percent lower than the final June 2012 level of $1.54 billion, and is 2.9 percent less than the July 2011 billings level of $1.52 billion.

“Bookings and billings for North American semiconductor equipment in July are close to values reported exactly one year ago,” said Denny McGuirk, president and CEO of SEMI.  "Seasonal slowing of investment activity in the current cycle is reflected in reduced orders as the industry enters the second half of the year.”

The SEMI book-to-bill is a ratio of three-month moving averages of worldwide bookings and billings for North American-based semiconductor equipment manufacturers. Billings and bookings figures are in millions of U.S. dollars.

 

Billings
(3-mo. avg)

Bookings
(3-mo. avg)

Book-to- Bill

 February 2012

1,322.8

1,336.9

1.01

 March 2012

1,287.6

1,445.7

1.12

 April 2012

1,458.7

1,602.8

1.10

 May 2012

1,539.3

1,613.7

1.05

 June 2012
 (final)

1,535.7

1,424.3

0.93

 July 2012
 (prelim)

1,476.5

1,278.7

0.87

Source: SEMI August 2012


The data contained in this release were compiled by David Powell, Inc., an independent financial services firm, without audit, from data submitted directly by the participants. SEMI and David Powell, Inc. assume no responsibility for the accuracy of the underlying data.

The data are contained in a monthly Book-to-Bill Report published by SEMI. The report tracks billings and bookings worldwide of North American-headquartered manufacturers of equipment used to manufacture semiconductor devices, not billings and bookings of the chips themselves. The Book-to-Bill report is one of three reports included with the  Equipment Market Data Subscription (EMDS).

SEMI is the global industry association serving the nano- and micro-electronic manufacturing supply chains. Our 2,000 member companies are the engine of the future, enabling smarter, faster and more economical products that improve our lives. Since 1970, SEMI has been committed to helping members grow more profitably, create new markets and meet common industry challenges. SEMI maintains offices in Beijing, Bengaluru, Berlin, Brussels, Grenoble, Hsinchu, Moscow, San Jose, Seoul, Shanghai, Singapore, Tokyo, and Washington, D.C. For more information, visit  www.semi.org.

Association Contacts

Dan Tracy/SEMI
Phone: 1.408.943.7987
Email:  Email Contact

Deborah Geiger/SEMI
Phone: 1.408.943.7988
Email:  Email Contact

Notes:

  • Next SEMI Book-to-Bill:  September 20,  2012 at 3:00pm PDT  
  • The SEMI North American Book-to-Bill data trends include estimates for some North American companies that do not participate in the SEMI data collection program.  Estimates are based on most current public financial statements and announcements from companies, in addition to analysis of overall equipment industry trends.  These estimates represent up to approximately 20 percent of the SEMI Book-to-Bill.  
  • Beginning with the July 2012 data, SEMI returns to a reporting format that accommodates two months of data refinement (revision): the first month of data is labeled ‘preliminary’; the second month, the data is labeled ‘revised’; and the third month, the data is labeled ’final’.  This reporting procedure was used for the SEMI North American Book-to-Bill up until October 2001.  
  • For information on SEAJ Book-to-Bill Report, visit  www.seaj.or.jp 


Read the complete story ...


Review Article Be the first to review this article
Rand3D

Featured Video
MCAD Corporate Newsletter
rss feed
Jobs
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial
SolidCAM: SolidCAM Dec 2017 Campaign Save 28 percent



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise