General Motors Trials MagneGas™ Alternative Metal-Working Fuel

TAMPA, Fla., July 17, 2012 — (PRNewswire) — MagneGas Corp. (OTCBB: MNGA; MNGAD) is now supplying General Motors (NYSE: GM) with its MagneGas™ fuel. MagneGas Corp. converts liquid-based materials into hydrogen-based fuel, removing acetylene from the process.

GM is trialing the fuel in maintenance and metal-working activities at its Grand Blanc Weld & Tool Center in Flint, Mich.  MagneGas will ship their fuel cylinders from its production facility in Michigan.

GM tested MagneGas™, assessing its environmental, health and safety impacts. It found it cut cleaner, faster and is more cost-effective than acetylene.

"We are always in pursuit of technologies that enhance quality and efficiency while also performing well on a holistic business case," said John Bradburn, manager of waste-reduction efforts at GM. "In its current state, this technology does just that. We're working closely with MagneGas to discuss possible future applications with potential to reduce our environmental impact."

"The fact that a world-renowned and storied company like GM would use MagneGas™ is an endorsement to the quality and benefits of our gas," said Marc Cuffaro, executive vice president of MagneGas Business Development.

"We're excited at the prospect of building a long-lasting relationship with GM and we will continue to capitalize on growth opportunities by showcasing the versatility and superiority of MagneGas™," commented Scott Wainwright, president of MagneGas Corp.

To be added to the MagneGas investor email list, please email Email Contact with MNGA in the subject line.

The MagneGas iPhone App is now available for free at the Apple App store on the iPhone or at http://bit.ly/AfLYww.

About MagneGas Corp.

Founded in 2007, Tampa-based MagneGas Corp. (OTC BB: MNGA; MNGAD) is the producer of MagneGas™, a natural gas alternative and metal working fuel that can be made from certain industrial, municipal, agricultural and military liquid wastes following the receipt of appropriate governmental permits.

The Company's patented Plasma Arc Flow™ process gasifies liquid waste, creating a clean burning hydrogen based fuel that is essentially interchangeable with natural gas. MagneGas™ can be used for metal working, cooking, heating, powering bi fuel automobiles and more. For more information on MagneGas, please visit the Company's website at www.magnegas.com.

FORWARD-LOOKING STATEMENTS

This press release contains forward-looking statements as defined within Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended.  These statements relate to future events, including our ability to raise capital, or to our future financial performance, and involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance, or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these forward-looking statements. You should not place undue reliance on forward-looking statements since they involve known and unknown risks, uncertainties and other factors which are, in some cases, beyond our control and which could, and likely will, materially affect actual results, levels of activity, performance or achievements. Any forward-looking statement reflects our current views with respect to future events and is subject to these and other risks, uncertainties and assumptions relating to our operations, results of operations, growth strategy and liquidity. We assume no obligation to publicly update or revise these forward-looking statements for any reason, or to update the reasons actual results could differ materially from those anticipated in these forward-looking statements, even if new information becomes available in the future. The Company is currently using new antifreeze, vegetable oil and ethylene glycol to produce fuel until proper permits to process used liquid waste have been obtained.

For a discussion of these risks and uncertainties, please see our filings with the Securities and Exchange Commission. Our public filings with the SEC are available from commercial document retrieval services and at the website maintained by the SEC at http://www.sec.gov.

SOURCE MagneGas Corporation

Contact:
MagneGas Corporation
GM
Investors: KCSA Strategic Communications, Philip Carlson
Phone: +1 212.896.1233
Email Contact
Brad Nelson
Phone: +1 212.896.1217
Email Contact
Web: http://www.magnegas.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise