Xilinx Integrated Block for the PCI Express Gen3 Standard Accelerates Productivity and Increases System Performance

Xilinx delivers industry-leading PCI Express Gen3 hard block and 1866 Mb/s DDR3 solution

SAN JOSE, Calif., June 27, 2012 — (PRNewswire) — �Xilinx, Inc. (NASDAQ: XLNX) today announced its solution for designs using the Virtex®-7 field programmable gate array (FPGA) integrated block for PCI Express® x8 Gen3 with DDR3 external memory, providing developers with all the building blocks needed to get started on PCI Express Gen3-based designs immediately. The Xilinx® integrated blocks for the PCI Express Gen3 standard along with support for 1866 Mb/s high speed memory interfaces in mid-speed grade devices allow users to design systems that meet high system bandwidth requirements needed in communications, storage, server applications, and more.

With a 40 percent performance advantage versus competing memory solutions, Xilinx allows users to accelerate productivity by offering maximum memory data rates in its mid-speed grade devices as well as built-in capabilities in its Virtex-7 XT devices for single-root I/O virtualization and multi-function end points to address the emerging needs in Data Center and cloud computing.

"Customers have the components they need to implement high-performance PCI Express x8 Gen3-based designs at the lowest BOM cost by using a mid-speed grade device," said Ketan Mehta, Xilinx PCI Express Product Manager. "In addition, Xilinx enables the highest productivity levels with industry-leading transceiver technology that provides automated tuning capabilities to quickly bring up a functioning link, including auto-adaptive Decision Feedback Equalization (DFE). This dramatically accelerates development time by simplifying the set up and use of the high-speed serial transceivers that support the PCI Express Gen3 standard." 

Virtex-7 XT and HT FPGAs are the first generation of Xilinx All Programmable devices that integrate hard IP cores for the PCI Express Gen3 standard. Both Kintex™-7 and Virtex-7 FPGAs feature1866 Mb/s DDR3 external memory interfaces to further bolster the PCI Express system throughput. Xilinx's PCI Express Gen3 video demonstrates the integrated block operating on a Virtex-7 X690T FPGA with an off-the-shelf PCI Express Gen3 system.

For designs that do not use an integrated block for the PCI Express Gen3 standard, soft IP core support is available through Xilinx Alliance Program members, including Northwest Logic and PLDA.

Availability

All the elements needed for PCI Express x8 Gen3-based designs are now available, including the Virtex-7 X690T FPGA with an integrated PCI express block, ISE® Design Suite 14.1 software tool support, a DMA engine provided by third-party Xilinx Alliance Program members, and a 1866 Mb/s DDR3 external memory interface. Watch the demonstration video of the Virtex-7 X690T FPGA with the integrated block for the PCI Express Gen3 standard. Visit the PCI Express standard page on Xilinx.com or contact your local sales representative for more information. Go to Xilinx.com to watch the demonstration of Xilinx's 1866 Mb/s DDR3 external memory interface using a mid-speed grade device on a Kintex-7 325T FPGA board.

About Xilinx

Xilinx is the world's leading provider of All Programmable technologies and devices, going beyond traditional programmable logic to enable both hardware and software programmability, integrate both digital and analog mixed-signal functions, and allow new levels of programmable interconnect in both monolithic and multi-die 3D ICs. The company's products are coupled with a next-generation design environment and IP to serve a broad range of customer needs, from programmable logic to programmable systems integration. For more information, visit www.xilinx.com.

#1245p

Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Zynq, Vivado and other designated brands included herein are trademarks of Xilinx in the United States and other countries. PCI, PCIe and PCI Express are trademarks of PCI-SIG and used under license. All other trademarks are the property of their respective owners.

Xilinx
Bruce Fienberg
408-879-4631
Email Contact

SOURCE Xilinx, Inc.

Contact:
Xilinx, Inc.
Web: http://www.xilinx.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise