AWR Design Forum (ADF) 2012 Agendas Announced and Registration Opens

Japan, Korea and Taiwan Venues Set for July  

EL SEGUNDO, Calif. – June 26, 2012AWR Corporation, the innovation leader in high-frequency EDA software, announces that agendas for the AWR Design Forums (ADF) 2012 ( for Japan, Korea and Taiwan have been finalized and posted online, and registration will be open through the day preceding each event.  The Japan event is scheduled for Friday, July 6, 2012; the Korea event is scheduled for Tuesday, July 10, 2012; and the Taiwan event is set for Thursday, July 12, 2012.

ADF is an open event at which designers of microwave and RF circuits and systems such as monolithic microwave integrated circuit (MMIC), RF printed circuit board (RF PCB) and LTE communication systems can network and share useful information and resources pertinent to high-frequency design, discuss AWR products and technologies, and collaborate on industry issues and trends. Complete customer and partner presentations, by venue location, are found online at  

Select agenda highlights, by venue, include:

Japan – Friday, 6 July 2012     

·         Z/Y/S-Parameter-Friendly Formulas for Q Factor Estimation
o   Dr.Takashi Ohira of Toyohashi University of Technology

·         Wireless Power Transmission Using GaN SBD
o   Dr. Yasuo Ohono - Tokushima University

·         Efficient Utilization of RF/Microwave Circuit Simulator
o   Yuichi Ichikawa - I-Laboratory

·         Introduction of a GaN Amplifier Design Using AWR
o   Dr. Eigo Kuwata - Mitsubishi Electric Corporation

·         Microwave Office™ and CR-8000
o   Naoki Hata – ZUKEN INC

·         New Switch Non-Linear Model Development
o   Ms. Maya Chai - WIN Semiconductors Corporation


Korea – Tuesday, 10 July 2012            

AWR Software for Microwave Circuit and System Classes
o   Prof. Kang-Wook Kim - Kyungpook National University

·         Design and Simulation of Modern Radar Systems
o   Dr. Gent Paparisto - AWR Corporation

·         Design of a High-Efficiency Power Amplifier with Accurate EM Modeling
o   PROF. Young-Cheol Park - Hankuk University

·         Evaluation of a Power Amplifier Fixture Board Using AWR’s Simulators
o   Sang-No Lee - Samsung Electronics

·         MMIC Oscillator Design Using Microwave Office and AXIEM®
o   DR. Hyun Jin Kim - ARD Technologies Inc.

·         Streamline your Design to Test Flow Without the Integration Work
o   David A. Hall - National Instruments



Taiwan – Friday, 12 July 2012             

·         Circuit Design In an Ultra Low Temperature Environment
o   Dr. Chau-Ching Chiong – ASIAA

·         Design of a Novel Multi-Slot Antenna in AXIEM
o   Dr. Milton Lien - AWR Corporation

·         Optimizing the Design and Verification of 4G RF Power Amplifiers
o   Dr. Gent Paparisto and Josh Moore - AWR Corporation

·         Fully Integrating Analyst™ 3D EM Simulation into the Circuit Simulator Environment
o   Dr. John Dunn - AWR Corporation

·         Electrical/Thermal Coupled Solutions for MMIC Designs
o   Dr. John Dunn – AWR Corporation

·         AWR’s Visual System Simulator™ in Base Station PA Modeling for LTE and 802.11ac
o   Dr. Gent Paparisto and David Hall - AWR Corporation and National Instruments

Register online at:

Japan, Friday, 6 July 2012:

Korea, Tuesday, 10 July 2012:

Taiwan, Thursday, 12 July 2012:

About AWR

AWR, the innovation leader in high-frequency EDA software, dramatically reduces development time and cost for products employed in wireless, high-speed wired, broadband, aerospace and defense, and electro-optical applications.

Visit AWR at: AWR.TV, AWR Blogs, RSS, Facebook, Twitter, YouTube, and LinkedIn 


© Copyright 2012 AWR Corporation. All rights reserved. AWR and AXIEM are registered trademarks and the AWR logo,  Microwave Office, Visual System Simulator and Analyst are trademarks of AWR Corporation. Other product and company names listed are trademarks or trade names of their respective companies. 

Sherry Hess 
Vice President of Marketing
AWR Corporation
(310) 726-3000
Email Contact  



Review Article Be the first to review this article

SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Lead Geospatial Analyst for Alion at McLean, VA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise