Delcam to show faster tooling design and machining at Amerimold

Delcam’s CADCAM software helps to shorten delivery times and maintain high quality
at leading moldmakers like Omega Tool

May 30, 2012 -Delcam will show how the 2012 versions of its PowerSHAPE CAD software and its PowerMILL CAM system can speed the design and manufacture of all types of mold on booth 411 at the Amerimold exhibition to be held in Novi, Michigan, on 13th and 14th June.  The programs allow toolmakers to increase their productivity at all stages of any project, so reducing costs and shortening lead times, as well as ensuring the highest quality in the finished mold and all components produced from it.

The faster mold design has been made possible by the incorporation within PowerSHAPE of a range of direct modeling options to complement the existing strengths in solid and surface modeling.  The new options are focused on design for manufacture, in particular on preparing product designs for the development of molds.  Full details, including video demonstrations of the new functionality plus the ability to download an evaluation version, are on the PowerSHAPE 2012 Learning Zone – www.delcam.tv/ps2012/lz.

The direct modeling functionality that has been added will enable tooling designers to tackle all the common problems that they find in product designs, such as insufficient draft or inappropriate fillet sizes.  Direct modeling is faster to use than surface modeling for these types of modification so it can shorten the overall time needed to produce tooling and so reduce delivery times.  In addition, the new options have been made as accessible as possible by enhancing existing commands rather than grouping them in a separate area of the software.

Together with the extensive data translation and data repair options already available in PowerSHAPE, the addition of direct modeling gives a unique range of capabilities to tooling designers, whether they are working with injection molds, RIM tools or lay-up equipment for composites.

The 2012 R2 version of PowerMILL includes new and enhanced strategies for both roughing and finishing.  Full details of both the 2012R1 and R2 releases, including videos of the new functionality, can be seen on www.delcam.tv/pm2012/lz.

The most important of the new strategies is step cutting within area clearance, which will be especially valuable for manufacturers of larger molds.  Modern roughing tools are capable of removing material more quickly by using larger stepdowns.  The disadvantage of this approach is that large terraces can be left on the part.  These steps can be removed by rest machining with a smaller tool.

An alternative approach is to step back up the terrace with the existing large tool, adding extra cuts at intermediate levels.  This results in more material being removed, using the same tool within the same toolpath.  The rate of material removal can be optimized by increasing the feed rate automatically as the depth of cut gets smaller.  This reduces the overall machining time.

Another enhancement produces a more efficient result when using automatic verification on a toolpath to prevent a collision by the shank or the toolholder.  In the previous versions of PowerMILL, the tool would be retracted to a safe height whenever a collision was possible and then returned to the part once it was safe to continue machining.  Now, PowerMILL generates a continuous toolpath that removes as much material as possible, while still avoiding any collisions.  The elimination of the retract moves shortens machining times and gives an improved surface finish, while the continuous cutting reduces the change of load on the tool so increasing its life.

Work has also continued to improve the macro language within PowerMILL that can be used to automate any routine or repetitive calculations, for example when producing a series of molds for different products of similar size and complexity.  A new macro debugger has been added that makes it easier and quicker to identify any errors in a macro.  Furthermore, the creation and editing of larger, more complex macros has been made easier with a new option to set breakpoints within the macro and the ability to view the contents of the variables in a separate watch window.

 

For further information on Delcam and mouldmaking software, please contact: -

Peter Dickin, Marketing Manager

Direct phone: 44 (0)121 683 1081                 e-mail: Email Contact

 

Delcam plc                                                                

Small Heath Business Park,                                      

Birmingham, B10 0HJ, UK

www.delcam.com




Review Article Be the first to review this article


Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
PTC Strengthens IoT Position By Acquiring Axeda
Jobs
DVR-AutoCAD Civil 3D/Microstation Drafter for Shannon & Wilson, Inc at Denver, CO
Engineering Program Managers for D E Shaw Research at New York City, NY
Head of Engineering Program Management for D E Shaw Research at New York City, NY
Manufacturing Operations Lead for D E Shaw Research at New York City, NY
Upcoming Events
Combine YourShift your SolidWorks 3D-Skills into high gear with MLC CAD Systems Hands On Test Drive - Houston at MLC CAD Systems-Houston 10777 Northwest Freeway, Suite 175 Houston TX - Jul 30, 2014
Grow Your Business with SolidWorks Solutions and MLC CAD Systems - Birmingham at MLC CAD Systems-Birmingham One Perimeter Park South Birmingham AL - Jul 30, 2014
CFD Deep Dive - GoEngineer: Santa Clara at GoEngineer Santa Clara - Bldg 44 3350 Scott Blvd. Bldg 44 Santa Clara CA - Aug 5, 2014
3DP Print A Part Tuesday - Woodland Hills, CA at GoEngineer - Woodland Hills 6400 Canoga Ave. #121 Woodland Hills CA - Aug 5, 2014



Click here for Internet Business Systems © 2014 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and EngineeringEDACafe - Electronic Design AutomationGISCafe - Geographical Information ServicesTechJobsCafe - Technical Jobs and ResumesShareCG  - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise