GLOBALFOUNDRIES Improves IC Reliability with Customized Circuit Checks Using Mentor Graphics Calibre PERC

WILSONVILLE, Ore. — (BUSINESS WIRE) — May 22, 2012 — Mentor Graphics Corp. (NASDAQ: MENT) today announced that GLOBALFOUNDRIES is helping its customers improve reliability checking by adding Calibre® PERC to select 28nm bulk CMOS design enablement flows. Calibre PERC will give designers access to the new reliability verification rules developed by the IBM Semiconductor Development Alliance (ISDA), augmented with GLOBALFOUNDRIES specific checks to help prevent external latch-up. Using Calibre PERC’s unique architecture, complex reliability rules that require the integration of logical (net list) and layout (GDS) information can be fully automated, eliminating manual spreadsheet-based efforts and reducing the chances of design errors.

“In the past, verification of latch-up immunity depended on manual layout checks and rough approximations of device and interconnect resistance using traditional mechanisms,” said Bill Liu, vice president of design enablement at GLOBALFOUNDRIES. “Now our customers can perform accurate measurements and analysis automatically using Calibre PERC’s data integration capability. For example, some of our customers are currently using PERC to accurately determine the resistance of the paths in complex output driver arrays as a function of device spacing. This allows them to easily and accurately detect points in the circuit where latch-up could be an issue and to make appropriate improvements.”

GLOBALFOUNDRIES’ 32/28nm solutions are based on the Gate First HKMG technology that has reached high-volume production in the company’s Fab 1 facility in Dresden, Germany. This approach to HKMG offers advantages in terms of both scalability and manufacturability, enabling full scaling from 40nm in area and performance, while sharing the process flow, design flexibility, design elements and benefits of all previous nodes based upon poly SiON gate stacks.

The Calibre PERC product is capable of performing complex checks needed to address reliability issues, including electrostatic discharge (ESD), electrical overstress (EOS), errors arising from signals crossing multiple power domains, and advanced electrical rule checking (ERC) concerns. It is uniquely capable of revealing electrical violations that might otherwise result in short-term, long-term or even catastrophic electrical failure. It not only detects violations, but provides designers with a holistic environment for debugging circuit reliability problems with an integrated view of circuit connectivity, topology, physical layout and design rules that is not available in any other tool. Like other Calibre products, the Calibre PERC solution uses the Mentor® advanced SVRF and TVF (TCL verification) formats, for quick implementation of customized checks to detect electrical design issues.

“Calibre PERC is both highly customizable and user friendly,” said Joe Sawicki, vice president and general manager of the Design-to-Silicon Division at Mentor Graphics. “Moreover, it runs on any netlist; it is integrated with the rest of the Calibre product suite; and it is interfaced to all major design flows. So it quickly delivers the trusted accuracy needed by designers to produce world-class silicon solutions.”

About Mentor Graphics
Mentor Graphics Corporation is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in the last fiscal year of about $1,015 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, Mentor and Calibre are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)



Contact:

Mentor Graphics
Gene Forte, 503-685-1193
Email Contact
or
Sonia Harrison, 503-685-1165
Email Contact
www.mentor.com




Review Article Be the first to review this article
Rand3D

SolidCAM: SolidCAM Dec 2017 Campaign Save 28 percent

Featured Video
Jobs
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise