ANSYS CFD technology and simulation expertise provided valuable insight to wastewater treatment facility

FOR IMMEDIATE RELEASE

SimuTech Group contact:   Public Relations contact:
Eric Underwood             Laura Carrabine
303.832.3149 X1751    440.708.6851
Email Contact   Email Contact

ANSYS CFD technology and simulation expertise provided valuable insight
to wastewater treatment facility

Early CFD analyses helped save $70,000 in project costs.

Rochester, NY: May 15, 2012 -- SimuTech Group (SimuTech), the largest full service North American ANSYS channel partner, recently completed a series of sophisticated analyses of wastewater flow at the Southerly Wastewater Treatment Plant that serves the greater Cleveland, Ohio area. SimuTech was contracted by Burgess & Niple, a civil engineering firm, to help determine the impact and potential improvement of proposed changes to the plant’s grit removal system.

SimuTech consulting engineers Michael Showalter and Mark Goodin performed computational fluid dynamic (CFD) simulations using ANSYS CFX® software. The project was comprised of three phases. Showalter said, “The first phase of the CFD analysis for the Southerly project was to model the water flow through the grit tanks under both nominal and peak flow conditions. The objective of this analysis was to determine the water level in the grit tanks for both flow conditions with the proposed new flow baffling.  It was very important to ensure that inclusion of the flow baffles did not reduce the maximum water capacity of the tanks.”

The second phase involved modeling wastewater flow through a single grit tank with proposed air injection nozzles and flow baffles installed. The CFD model was used to determine the required air flow from the nozzles to reach the desired rotational flow in the grit tank. The simulations also revealed that one of the proposed flow baffles actually impeded the rotational flow and could be removed resulting in a $70,000 cost savings.

The third phase of the CFD analysis used the air injection conditions determined from phase two and released small and large grit particles into the waste water flow upstream of the grit tank. The CFD simulation tracked the path of these particles as they flowed through the grit tank system and predicted the removal rates of various sized particles.  The conclusion was that the predicted removal rates met the design goals.

As a result of using CFD technology, the Burgess & Niple team realized a $70,000 savings to the Southerly project. Carl Seifried, P.E. Burgess & Niple Project Manager, noted, “The simulations showed that we could eliminate one of the originally proposed flow baffles. The ability to visualize ‘what-if’ scenarios before constructing and testing the grit tank modifications saved both time and considerable expenses.”

About SimuTech Group
SimuTech Group, Inc. is North America’s largest full-service provider of ANSYS engineering simulation software for finite element analysis (FEA) and computational fluid dynamics (CFD). SimuTech also resells and supports Autodesk® Moldflow® for plastics injection molding, TOSCA Structure for topology, shape and durability optimization, TOSCA Fluid for optimization of internal flows, and fe-safe for fatigue analysis. Headquartered in Rochester, NY, the company has 10 offices in North America. For more information, go to www.SimuTechGroup.com.

About Burgess & Niple
For 100 years, Burgess & Niple (B&N) has led the development of infrastructure in rural and urban regions. The firm’s success is driven by a passion for advancing the built environment with exceptional concern for quality of life, safety, and sustainability.

B&N’s team of in-house professional includes planners, engineers, architects, environmental scientists, geologists, and much more. Its work spans the world and ranges from complex, urban renewal projects to finding potable water for arid, rural villages.

Burgess & Niple currently ranks 138th on Engineering News-Record’s list of Top 500 design firms in the U. S. based on 2011 total billings. Headquartered in Columbus, Ohio, B&N has 20 offices across the nation. For more information, go to www.burgessniple.com

ANSYS CFX is a registered trademark of ANSYS, Inc. or its subsidiaries in the United States or other countries.

Autodesk and Moldflow are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.

All other brand, product, service and feature names or trademarks are the property of their respective owners.

 
 



Read the complete story ...


Review Article Be the first to review this article


Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Technology of the Year: The Internet of Things
Jobs
Currently No Featured Jobs
Upcoming Events
Solidworks World 2015 from Feb. 8 - 11, 2015 Phoenix Convention Center, Phoenix, AZ at Phoenix Convention Center 100 N 3rd St, Phoenix AZ - Feb 8 - 11, 2015
Eastern States Exposition at West Springfield MA - May 12 - 14, 2015
WESTEC 2015 at Los Angeles Convention Center Los Angeles CA - Sep 15 - 17, 2015
ESI DACH Forum 2015 at Germany - Oct 7 - 8, 2015
SolidCAM: Live imachining



Click here for Internet Business Systems © 2014 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and EngineeringEDACafe - Electronic Design AutomationGISCafe - Geographical Information ServicesTechJobsCafe - Technical Jobs and ResumesShareCG  - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise