MoSys Demonstrates Bandwidth Engine IC Interoperability with LSI SerDes

SANTA CLARA, Calif. — (BUSINESS WIRE) — February 15, 2012MoSys (NASDAQ: MOSY), a provider of serial chip-to-chip communications solutions that deliver unparalleled bandwidth performance for next generation networking systems and advanced system-on-chip (SoC) designs, has successfully demonstrated interoperability of its Bandwidth Engine® IC with the SerDes characterization and evaluation board from LSI Corporation.

MoSys’ Bandwidth Engine SerDes is compatible with the OIF CEI-11G specification, allowing it to interface with OIF compliant transceivers, such as those available from LSI. The GigaChip™ Interface used by the Bandwidth Engine IC is a 90% efficient, no-cost, open transport protocol optimized for chip to chip communications. This demonstration shows the Bandwidth Engine IC communicating with LSI 15G SerDes test vehicle silicon at 10.3125Gbps using a PRBS31 pattern.

“LSI is well-known as one of the world’s leading providers of high-performance communication processors and custom silicon solutions and is renowned for its serial high-speed interface technology. Having interoperability between our Bandwidth Engine and high performance SerDes designed by LSI is an important milestone for future opportunities,” stated David DeMaria, Vice President of Business Operations for MoSys.

“Next generation data center and mobile infrastructure applications require ever increasing memory content and bandwidth to keep up with end user data,” stated Harold Gomard, LSI SerDes Product Manager. “Interoperability between MoSys' Bandwidth Engine and LSI SerDes technology enables our customers to realize a lower risk and faster time to market solution.”

About LSI

LSI Corporation (NYSE: LSI) designs semiconductors and software that accelerate storage and networking in datacenters and mobile networks. Our technology is the intelligence critical to enhanced application performance. The company applies its technology in solutions created in collaboration with our partners. More information is available at www.lsi.com.

About MoSys, Inc.

MoSys, Inc. (NASDAQ: MOSY) is a provider of high-performance networking memory solutions and high-speed, multi-protocol serial interface intellectual property (SerDes IP). MoSys' leading edge Bandwidth Engine® ICs combine the company's patented 1T-SRAM® high-density memory with its SerDes IP and are initially targeted at providing breakthroughs in bandwidth and access performance in next generation networking systems. MoSys’ SerDes IP and DDR3 PHYs support a wide range of data rates across a variety of standards, while its 1T-SRAM memory cores provide a combination of high-density, low-power consumption, high-speed and low cost advantages for high-performance applications. MoSys is headquartered in Santa Clara, California. More information is available on MoSys' website at www.mosys.com.

MoSys, 1T-SRAM and Bandwidth Engine are registered trademarks of MoSys, Inc. in the US and/or other countries. The MoSys logo and GigaChip are trademarks of MoSys, Inc. All other marks mentioned herein are the property of their respective owners.



Contact:

MoSys, Inc.
Kristine Perham, +1-408-418-7670
Email Contact
or
Shelton Group
Beverly Twing, +1-972-239-5119 ext. 126
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise