MSC Nastran 2012 Delivers Significantly Expanded Simulation of Real World Behaviors

SANTA ANA, CA -- (MARKET WIRE) -- Nov 03, 2011 -- MSC Software Corporation, the leader in multidiscipline simulation solutions that accelerate product innovation, today announced its new release of MSC Nastran 2012. This powerful release consolidates MSC Nastran and MD Nastran into a single solution for all MD and MSC Nastran customers. This simplifies the product offering and provides customers a single MSC Nastran platform for the future.

MSC Nastran customers will see significant enhancements in the 2012 release:


Simulate Implicit Nonlinear
Through an optional module, users can simulate nonlinear problems including geometric nonlinearity, material nonlinearity, and contact nonlinearity. Nonlinear convergence robustness has been enhanced with a new adaptive stepping procedure.

Perform Explicit Simulations
MSC Nastran 2012 also makes available a module that enables engineers to solve explicit nonlinear problems. These capabilities are primarily focused in the areas of performance for impact, fluid-structure interaction (FSI) applications, multi-physics, enhanced material models and robustness. Simulation times are greatly reduced for FSI analyses like drop testing of fluid filled plastic bottles, fuel tank sloshing, airbags, and occupant safety.


Easier 3D Linear Contact
Users can now access linear contact modeling which supports 3D touching contact modeling in linear statics and glued contact for linear statics, normal modes, and dynamics (transient, frequency, and buckling). This provides significant modeling efficiencies when working with assemblies.

Improved Results for Composites
Lamina stresses, lamina strains, failure indices, and strength ratios have been enabled for frequency response, transient response, and random vibration simulations. This is important for composite structures since failure occurs at the ply level.

Optimize your Designs
Control surface positions can now be selected as a designed quantity in MSC Nastran 2012 as a feature of MSC Nastran Optimization. In terms of applications, the use of control surfaces to redistribute the loading on an aircraft so as to lessen a critical loading is a practice that has been deployed on a number of air vehicles.

Simplify Aeroelasticity Calculations
The MSC Nastran 2012 release simplifies aeroelastic modeling. MSC Nastran 2012 will automatically determine the aerodynamic and structural grids that are within your defined depth and add them to the relevant splines, which is a significant benefit when used in conjunction with CFD.

Enhanced Acoustic Analysis
Several enhancements are made to MSC Nastran's acoustic analysis capabilities to help users achieve higher efficiency. These include an efficient single-step approach for interior/exterior acoustic studies, efficient participation factor analysis through parallelization, panel participation factor analysis extended to structural domain response, a new function to compute and output element sensitivity for acoustic responses and a new function to compute particle acceleration on wetted surface. Frequency dependent Trim Component and Pressure load matrices from Actran can now be included in Noise Vibration Harshness (NVH) system models.


High Performance Computing for Higher Productivity
Automated Component Modal Synthesis (ACMS) improvements enable automotive NVH analyses to utilize every available processor in a multi-core system (or a cluster of such systems) to improve engineering productivity, showing as much as 2 to 3 times performance gains over the 2010 release as well as scaling to more sockets and cores. Other performance enhancements include: improvements to unsymmetric matrix solution; a new Implicitly Restarted Arnoldi Method (IRAM) for complex eigenvalue solution that has shown up to 2 orders of magnitude improvement; and the ability to utilize a system's NVIDIA CUDA enabled Graphic Processing Units (GPU), which has shown overall performance improvement of up to 5 times. These enhancements provide critical tools for customers doing rotor dynamics, exterior acoustics, and related nonlinear applications.

For more details about the MSC Nastran 2012 release, visit and view the MSC Nastran 2012 video. To learn more, register for the upcoming "What's New in MSC Nastran 2012" Webcast at:

The MSC Nastran 2012 release will be available for customers to download later in November. MSC Nastran capabilities are supported in both Patran and SimXpert.

About MSC Software
MSC Software is one of the ten original software companies and the worldwide leader in multidiscipline simulation. As a trusted partner, MSC Software helps companies improve quality, save time and reduce costs associated with design and test of manufactured products. Academic institutions, researchers, and students employ MSC technology to expand individual knowledge as well as expand the horizon of simulation. MSC Software employs 1,000 professionals in 20 countries. For additional information about MSC Software's products and services, please visit:

The MSC Software corporate logo, Simulating Reality, Adams, Dytran, Easy5, Marc, MD Adams, MD Nastran, Patran, Mentat, MSC, MSC Masterkey, MSC Nastran, Mvision, SimDesigner, SimManager, and SimXpert are trademarks or registered trademarks of the MSC Software Corporation in the United States and/or other countries. NASTRAN is a registered trademark of NASA. All other trademarks belong to their respective owners.

Press Contact:
Leslie Rickey

Email Contact 

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise