EOS Sees New Age of Manufacturing Ahead as It Tops 1,000 Mark for Laser-Sintering Systems

Once a technology reserved for prototyping test parts, high-end equipment from EOS now produces custom designs that defy the limits of traditional manufacturing

NOVI, Minn. — (BUSINESS WIRE) — November 1, 2011 — Mass customization was dreamed about more than two decades ago as an attainable business strategy to reach individuals with products tailored perfectly to them. But technology constraints and the economics of standardized parts and modularized product lines won the day—resulting in copycat car body “platforms” that reached across brands, and PC boxes of mind-numbing uniformity.

Titanium Heel laser-sintered shoe (courtesy Kerrie Luft)

Titanium Heel laser-sintered shoe (courtesy Kerrie Luft)

Yet today, on an otherwise typical shop floor in Cincinnati, OH, a new generation of machines sits alongside traditional equipment and turns out unique, one-off products with astounding shapes and game-changing cost savings.

Morris Technologies Inc. (MTI) and its sister company Rapid Quality Manufacturing (RQM) operate 20 direct metal laser-sintering (DMLS) systems—the most of any organization in the world—from German producer EOS, and are at the forefront of OEMs and service bureaus in defining just what can be made by “growing” custom parts.

MTI was one of the first shops in the U.S. to collaborate closely with major aerospace and medical producers to explore laser-sintering. Now on its way to certifying laser-sintered metals in both fields, the company is making everything from lightweight components for military unmanned aerial vehicles (UAVs) to cobalt-chrome hip replacement prototypes for patients of the future.

Others are creating exotic lattice-like systems in plastics for lighting homes and offices, designer shoes with heels of braided titanium and, soon, cranial implants, knees and medical instruments designed around the exact geometry of the individual human body and the surgeon’s hands. The wide-open design freedom of laser-sintering systems, for making single parts and meeting low-volume production needs, creates the potential for serving not just doctors and engineers, but also start-up entrepreneurs who want to make clothing, games and consumer goods but don’t own factories or have the resources for risky, high-volume product trials in untapped markets.

“EOS technology has transformed a significant part of our business already,” says Greg Morris, CEO of MTI. “Laser-sintering is opening up whole new categories of opportunities for MTI and RQM, and we’ve expanded our DMLS capacity to more readily meet customers’ needs for rapid turnaround,” he notes.

“Customers are excited and are teaming up with us aggressively to quickly understand the potential of EOS laser-sintering and to test and advance their application concepts,” says Morris. “It’s a race to introduce innovative, bold ideas ahead of others. In ten years, people will look back at today and see the immense impact additive manufacturing has had on industry.”

Laser-sintering is an additive process that melts materials layer-by-layer at high temperatures, until the final—often complex—shape is achieved. Traditional machining, mold/cast or sheet forming technologies either cut away or pour and inject materials, and have well-defined limits that carry over to the geometries and performance characteristics of the products.

By contrast, EOS systems enable the designing-in of higher performance attributes previously unaffordable or even impossible to construct. A mold with cooling channels that snake around the bends and curves of a part is one practical example. What’s more, all this can be done in a “lights out,” automated operation. It’s these new shapes and manufacturing economics, coupled with a devotion to quality and validation, that are behind the company’s steady move to market leadership and an installed base exceeding 1,000 high-end systems worldwide.

“The economic impact of additive manufacturing (AM) is significant, especially considering the opportunities in custom and short-run production," says Terry Wohlers, industry consultant and analyst. "If one could calculate the monetary impact from the thousands of companies that benefit from AM, it would be in the billions of dollars annually.

"The AM industry has grown in the double digits for 14 of its 23 years," notes Wohlers. "It continues to have tremendous untapped potential. A product development company may spend five-to-ten percent on design and prototyping for a given program. The remaining 90-95 percent is spent on production, which is why so many companies are aggressively pursuing this segment of the market."

To learn more about EOS laser-sintering, go to http://www.eos.info/en/home.html or watch video at http://www.youtube.com/eosgmbh. For high-resolution images, go to http://www.eos.info/en/news-events/press-material.html.

Photos/Multimedia Gallery Available: http://www.businesswire.com/cgi-bin/mmg.cgi?eid=50050458&lang=en



Contact:

EOS of North America, Inc. – Electro Optical Systems
Jessica Nehro, +1 248 306 0143 – 104
Field Marketing Manager
Email Contact
or
Parker Group (editorial US)
Nick O’Donohoe, +1 401-272-1510
Email Contact
or
EOS – Electro Optical Systems GmbH
(Headquarters)
Claudia Jordan, +011 49 89 893 36 134
Group Manager Marketing Communications
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise