University of Michigan Solar Car Team Revs Up SolidWorks to Design World Solar Challenge Contender

Team Improves Solar Car Aerodynamics by 30 Percent, Reduces Weight by 200 Pounds

CONCORD, Mass. — (BUSINESS WIRE) — October 12, 2011 — Since the 1980s, engineers have been building, and racing solar cars. With software from Dassault Systèmes SolidWorks Corp., the University of Michigan (U-M) Solar Car Team has designed a car to compete in the World Solar Challenge in Australia this month. A six-time winner of the American National Championships, the U-M team is competing in the World Solar Challenge—and the car design is lighter and more aerodynamic than ever before.

Since 2006 U-M has used SolidWorks software to become the number 1 ranked collegiate solar car team in North America. Next week they will compete on the world stage driving 1800 miles across Australia thanks to the work of over 100 students in various disciplines at U-M. Quantum, the single-seat race vehicle, will travel as far as it can until 5pm each afternoon powered by the sun and 5kW hours of stored energy (the same amount of energy that it takes to power a hair-dryer) or on the recovered kinetic energy from the vehicle.

When designing the solar car, the U-M team found systems integration to be the most difficult challenge. Mechanical parts need to be small and light, in order to fit into as small an automotive shell as possible. The U-M team relied upon SolidWorks® 3D CAD software to model all of the car components, and determined the amount of space needed for each component. The result is a car that is 30 percent more aerodynamic and 200 pounds lighter than the previous version.

“Only one U.S. team has ever won the World Solar Challenge,” said Chris Hilger, Business Director of U-M Solar. “This year, we believe we have a winning car design due to the improved aerodynamic shell and significantly lighter weight. SolidWorks helped us model each part to be as small, light, and effective as possible, and this contributes significantly to the car’s speed and maneuverability.”

Battery thermal modeling was also a key challenge. Specifically, the team needed to control the temperature of the battery pack to prevent overheating. To solve this issue, the team used SolidWorks Simulation to determine the best thermal management solution. Unlike past years, when off-the-shelf batteries were used, this year’s battery was designed and created from scratch by the Solar Car team.

“The U-M Solar Car Team has been able to achieve groundbreaking results with a lighter and faster car,” said Marie Planchard, director of education at Dassault Systèmes SolidWorks. “This extraordinary team is poised to take the lead at the World Solar Challenge, and we’re proud to have contributed to a stellar—and hopefully winning—design.”

Follow the race at: http://www.worldsolarchallenge.org/.

About Dassault Systèmes SolidWorks Corp.

Dassault Systèmes SolidWorks Corp., a Dassault Systèmes S.A. subsidiary, is a world leader in 3D solutions that help millions of engineers and designers succeed through innovation. Our products deliver an intuitive experience in product design, simulation, publishing, data management, and environmental impact assessment. For the latest news, information, or an online demonstration, visit our Web site ( www.solidworks.com) or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).

SolidWorks is a registered trademark of Dassault Systèmes SolidWorks Corporation and 3DVIA Composer is a trademark of Dassault Systèmes in the US and other countries. Other brand and product names are trademarks of their respective owners. © 2011 Dassault Systèmes SolidWorks Corp.



Contact:

Dassault Systèmes SolidWorks Corp.
Kristen Wilson, +1 978-318-5245
Email Contact
www.solidworks.com
or
SHIFT Communications
Mike Fearon, +1 617-779-1807
Email Contact




Review Article Be the first to review this article
Rand3D

Featured Video
Jobs
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Structural Engineer for Albert Kahn and Associates at Detroit, MI
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Upcoming Events
Design for Metal Additive Manufacturing Short Course at Revere Hotel Boston Common 200 Stuart St Boston MA - Nov 27 - 28, 2017
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise