EDA Consortium Reports Revenue Increase for Q2 2011

SAN JOSE, Calif. — (BUSINESS WIRE) — October 5, 2011 — The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 17.6 percent for Q2 2011 to $1438.1 million, compared to $1222.9 million in Q2 2010. Sequential EDA revenue for Q2 2011 decreased 0.6 percent compared to Q1 2011, while the four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 16.3 percent.

“Second quarter 2011 results represent a significant increase in all product categories compared to the second quarter 2010, with CAE, PCB & MCM, SIP, and services all showing double digit increases,” said Wally Rhines, EDAC chair and chairman and CEO of Mentor Graphics. “Geographically, all regions realized increased revenue in Q2 2011 compared to Q2 2010, with double digit increases in the Americas, Japan, and Asia/Pacific regions.”

Companies that were tracked employed 26,721 professionals in Q2 2011, an increase of 1 percent compared to the 26,457 people employed in Q1 2011, and up 2.9 percent compared to Q2 2010.

The complete MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available via subscription from the EDA Consortium.

Revenue by Product Category

The largest category, Computer Aided Engineering (CAE), generated revenue of 549.8 million in Q2 2011, which represents a 19.8 percent increase over Q2 2010. The four-quarters moving average for CAE increased 17.3 percent.

IC Physical Design & Verification revenue increased to $286.9 million in Q2 2011, a 5.8 percent increase compared to Q2 2010. The four-quarters moving average increased 9 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $144.9 million represents an increase of 21.7 percent compared to Q2 2010. The four-quarters moving average for PCB & MCM increased 17 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $367.7 million in Q2 2011, a 22.6 percent increase compared to Q2 2010. The four-quarters moving average increased 25.1 percent.

Services revenue was $88.8 million in Q2 2011, an increase of 19.9 percent compared to Q2 2010. The four-quarters moving average increased 3.6 percent.

Revenue by Region

The Americas, EDA’s largest region, purchased $626.1 million of EDA products and services in Q2 2011, an increase of 21.1 percent compared to Q2 2010. The four-quarters moving average for the Americas increased 17.7 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) was up 8.8 percent in Q2 2011 compared to Q2 2010 on revenues of $246.5 million. The EMEA four-quarters moving average increased 8.4 percent.

Second quarter 2011 revenue from Japan increased 17.8 percent to $253.9 million compared to Q2 2010. The four-quarters moving average for Japan increased 11.1 percent.

The Asia/Pacific (APAC) region revenue increased to $311.6 million in Q2 2011, an 18.1 percent increase compared to the same quarter in 2010. The four-quarters moving average increased 26 percent.

About the MSS Report

The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available by annual subscription. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design and Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the EDA Consortium

The EDA Consortium is the international association of companies that provide design tools and services that enable engineers to create the world’s electronic products used for communications, computer, space technology, medical, automotive, industrial equipment, and consumer electronics markets among others. For more information about the EDA Consortium, visit www.edac.org, or to subscribe to the Market Statistics Service, call 408-287-3322 or email Email Contact.

The information supplied by the EDA Consortium is believed to be accurate and reliable, but the EDA Consortium assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.



Contact:

EDA Consortium
Paul Cohen, 978-769-2106
or
Mentor Graphics
Suzanne Graham, 503-685-7789




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise