Software Factory Presents PE-INSPECT: The Software to Automate the Capture of Inspection Characteristics and Documentation of Revision Changes for Creo™ or Pro/ENGINEER™

Software Factory Presents PE-INSPECT: The Software to Automate the Capture of Inspection Characteristics and Documentation of Revision Changes for Creo™ or Pro/ENGINEER™ 

PE-INSPECT is the software that makes the day-to-day work easier - for the engineering department, for the product division as well as for the quality assurance.The application automates the marking of drawings and models, the tracking of changes and the documenting of inspection characteristics in Creo or Pro/ENGINEER.

Well-known companies as ABB, Bauknecht, Bosch, Carl Zeiss, Liebherr-Aerospace, Volkswagen or Wabco trust in PE-INSPECT and use it very successfully. 

Your Success is our Goal – The Key Benefits of PE-INSPECT at one Glance:

  • Save Time and Money – Up to 80% Time-Saving

At the push of a button all inspection characteristics are full-automatically determined from the 3D model with its geometry, dimensioning and the drawing information. Hence, a process capable and consistent preparation and use of design data for inspection is secured. The characteristics are documented across the complete life cycle with a unique number, and labelled in the drawing. 

  • Eliminate Sources of Error – Accurate Inspection Drawings and Inspection Reports

After implementing PE-INSPECT errors as typos, read errors, comparison errors and outdated documents will be a thing of the past. The reason for this is simply that the inspection data does not have to be manually transferred from inspection drawings into inspection reports or CAQ systems any more, because PE-INSPECT will handle this process automatically for you.

  •   Simplify the Tracking and Documenting of Changes

Due to the characteristic number, all changes made to the 3D model and in the drawing can automatically be tracked and documented.

Software Factory offers free webcasts to show how easy it is to use PE-INSPECT. Call SF on + 49 89 323 501-10 or write an e-mail to Email Contact

Check out our FreeTools for Creo at www.sf.com

About Software Factory

Software Factory (SF from Garching near Munich/Bavaria, Germany) was one of the first companies world-wide providing unique software solutions to PTC customers in the early nineties. SF creates innovative, leading-edge software solutions in the area of industrial product development and production. Over the last 15 years, Software Factory has developed an excellent reputation and established long-term relations to leading companies world-wide throughout the automotive industry, the semi-conductor industry, and other main industries. Software Factory supplies to customers all over Europe, the USA and Asia. The privately owned Software Factory was founded in 1992 as a spin-off from the Institute for Machine Tools and Industrial Management of the Technical University of Munich.

PTC, Creo, Windchill and PartnerAdvantage are trademarks or registered trademarks of Parametric Technology Corporation or its subsidiaries in the United States and in other countries.

Contact:

Sandra Butscher

Software Factory GmbH

Fon +49 89 323 501 20
butscher@sf.com
www.sf.com



Read the complete story ...


Review Article Be the first to review this article
HP

Autodesk - DelCAM

Featured Video
Jobs
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Lead Geospatial Analyst for Alion at McLean, VA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise