CHAPTER 8

Conclusions


Prev TOC Next

8.4. Recommendations for further research

  • Application of the theory illustrated in Chapter 2 for power comparisons and analysis of power in A/D converters. Most of the effort should be done in the comparator sizing according to accuracy requirements for every bit. This is crucial in the next generation A/D for high frequency applications like RF fully digitized radio receivers.
  • A thorough investigation of power in oscillators, low-noise amplifiers where noise optimization is important for improving phase noise and noise factors respectively.
  • The use of chopper technique to improve matching in polyphase filters reducing further the power consumption and the realization of a polyphase filter capable of working below 1V (one penlite requires 0.9V when discharged).
  • The application of the chopper technique in low offset integrators used for battery management in monitoring the battery current.
  • The combination of the two Sinc approximation techniques in a single design for power reduction in the digital domain and the investigation of the possibility to use CDS format in having powers of two as coefficients. This will improve tremendously the matching in the current sources.
  • The implementation of a D/A converter with a class A chopped amplifier for increasing the dynamic range for high resolution applications (>20 bit).
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise