CHAPTER 1

Introduction


Prev TOC Next

REFERENCES

[1] N. Weste, K. Eshragian, " Principles of CMOS VLSI design", Reading MA, Addison Wesley, 1985.

[2] J.S. Ward et al., "Figures of merit for VLSI implementations of digital signal processing algorithms", Proc. Inst. Elec. Eng., vol. 131, part F, pp.64-70, Feb. 1984.

[3] M. Kahumu, M. Kinugawa, "Power-supply voltage impact on circuit performance for half and lower submicrometer CMOS LSI", IEEE Trans. Electron Devices, vol.37, n0.8, pp.1902-1908, Aug. 1990.

[4] M. Nagata, "Limitations, innovations and challenges of circuits and devices into half-micron and beyond", Proc. Symp. VLSI circuits, pp.39-42, 1991.

[5] J. Borel, "LP/LV circuits in the deep submicron era" in the Proceedings of the 2nd IEEE-CAS Region 8 Workshop on Analog an Mixed IC Design, Baveno, Italy, 1997.

[6] M.A. Cirit, " Estimating dynamic power consumption of CMOS circuits", Proc. IEEE Int. Conf. Computer Aided Design, pp.534-537, Nov. 1987.

[7] S.R. Powell and P. Chan, "Estimating power dissipation of VLSI signal processing chips: The PFA technique", VLSI Signal Processing IV, New-York: IEEE Press, 1990, Chapter 24.

[8] H.J.M. Veendrick, "Short-circuit dissipation of static CMOS circuitry and its impact on the design of buffer circuits", vol. Sc-19, pp. 468-473, Aug. 1984.

[9] B. Nadel, "The Green Machine", PC Magazine, vol.12, no.10, pp.110, May, 1993.

[10] J. Borel, "ESSCIRC '97 low-power, low-voltage workshop", Southampton, UK, Sept.1997.

[11] J. Rapeli, "Requirements and opportunities for integrated circuit technologies for mobile communications" invited paper at the "5th IEEE International Conference on Electronics Circuits and Systems ICECS '98".

[12] J. Borel, "LP/LV circuits in the deep submicron era" in the Proceedings of the 2nd IEEE-CAS Region 8 Workshop on Analog an Mixed IC Design, Baveno, Italy, 1997.

[13] E. Vittoz, "Future of analog in the VLSI environment", Proc. ISCAS' 90, pp. 1372-1375, 1990.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise