Logic Design for Array-Based Circuits

by Donnamaie E. White

Copyright © 1996, 2001, 2002 Donnamaie E. White


Design Submission

Last Edit September 2, 2001

AC Tests Path Delay Vector Submission (Optional)

AC Testing is an automated testing methodology used to examine in close detail circuit performance measurements of propagation path delay. A separate set of vectors is required for each measurement, and each set must initialize and bias the path and provide the means by which the measurement can be made.

If this testing option is desired, then these vectors must be supplied. They are in addition to functional simulation vectors.

A maximum of 10 paths and 20 tests can be tested per array. Refer to the "Vector Submission Rules and Guidelines" concerning a concatenated set of vectors or the use of one set of vectors for multiple, individual tests.

AMCC requires that AC Test simulations be performed using the minimum library and then again using the maximum worst-case library. Refer to Volume I, Section 3 for the specific series to determine which library is maximum and which minimum for the array.

The minimum simulation should exactly match the maximum simulation. If not, a potential timing problem could exist. Resolve the problem or consult with AMCC and send in both the minimum and maximum AC Test simulations.

The AC Test simulations should be performed following the procedures described in the design manual.

Documentation of AC Test Simulation [AMCCSUBMIT]

The documentation required for an AC Test simulation submission is prompted for by the AMCCSUBMIT program interface. Before running AMCCSUBMIT, simulation files for the paths, both in sampled and in print-on-change format should exist. The program is iterative, allowing test to be documented one at a time or a test to be partially documented in one run and completed in another. All AMCCSUBMIT errors should be resolved prior to submission.

Copyright @ 2001, 2002 Donnamaie E. White, White Enterprises
For problems or questions on these pages, contact dew@Donnamaie.com