Hi everyone! In this blog, I’m going to showcase a brand-new feature available in SOLIDWORKS 2018 to help you design faster! Have you ever had an idea and either not had a mouse or wanted to sketch it freely rather than using a mouse? With this new release and your Windows 10 touch-enabled device, now you can live out those wants with Touch Based sketching.
I’m working on the gas cap for my RC car and I’ve decided that I want to really make it unique by adding a design to the front of it. I’m going to put a cloud to symbolize a gas cloud (and because there’s a reason I became an engineer instead of an artist.) I also found a picture that I want to use as a sketch picture and that’s in a sketch that I’ll unhide.
Figure 1: Gas Cap Isometric View
The first thing I want to point out is the new Sketch Ink Command Manager tab, which where all of my touch sketch commands will be. This can be turned on like any other command manager tab, right-click on an existing tab and select it from the list.
Figure 3: Sketch Ink Command Manager.
I’ll start my cloud sketch by selecting the gas cap face and hitting Sketch. There’s a pulldown to allow me to select a 2D or 3D sketch, touch sketching works with both. Next, you can customize your pen color and thickness. Use the slider to adjust the latter.
Next to that is an eraser tool if you need to delete any errant strokes, and the select tool to select geometry. The eraser works similarly to Power Trim, where swiping over existing geometry with it turned on erases it. The select tool turns your stylus or finger into a mouse pointer.
Figure 5: Remaining Sketch Ink Commands
The Touch button is next to that. I’m using a stylus, but you can use this mode with your finger. Without that button pressed, swiping on my screen causes the model to move around. Therefore, to start sketching I’m going to click that button. Next, there are 2 ways to sketch entities: Auto Shape and Auto Sketch Entities. I’ll use Auto Shape to sketch the cloud, converting my pen strokes to smooth geometry. These are just conceptual, but I can use Select and hit Update to Entities which will change them to sketch entities.
Figure 6: Cloud drawn using Auto Shape. Figure 7: Update to Entities command. Figure 8: Updated Entities.
If you prefer to go straight to sketch entities, use the Auto Sketch Entities button. I’ll switch over to that and sketch a lightning bolt. This will also imply sketch relations. Now I have a sketch that I can use to create a feature like a boss or cut, or a split line.
Autodesk’s President and CEO, Andrew Anagnost, kicks off AU 2017 with a unique perspective on automation and the Future of Work. Passionate about the topic, Andrew gives you the confidence to embrace this new future, and guest speakers share insights to help you thrive in this new world of working. You are left informed and excited about this future.
Andrew Anagnost is the President and Chief Executive Officer of Autodesk. Anagnost’s career spans more than 25 years of product, business, and marketing experience focused on driving strategy, transformation, and product development and includes positions at Autodesk, Lockheed Aeronautical Systems Company, and EXA Corporation. He also completed a doctorate degree at Stanford University and worked at NASA Ames Research Center as an NRC post-doctoral fellow. Anagnost began his career at Autodesk in 1997 and has held a wide range of roles in the areas of marketing, new business development, product management, and product development. Prior to becoming President and CEO in June 2017, he served as Chief Marketing Officer and SVP of the Business Strategy & Marketing organization. In this role, Andrew served as architect and leader of Autodesk’s business model transition moving the company to become a software-as-a-service (SaaS) solutions provider. Previously, Anagnost held various executive positions across Autodesk. Early in his Autodesk career, he led the development of the company’s manufacturing products and grew Autodesk Inventor revenue to over $500 million. Anagnost is a member of the Autodesk Board of Directors. He holds a Bachelor of Science Degree in Mechanical Engineering from the California State University, and holds both an MS in Engineering Science and a PhD in Aeronautical Engineering and Computer Science from Stanford University.
Although I’m not much of a fan for Las Vegas per se, I do enjoy attending Autodesk’s annual spectacle that attracts at least 10,000 attendees to Sin City — Autodesk University.
This year’s event was markedly different than ones in the recent past. Different because:
This was the first AU presided over by Autodesk’s new President and CEO, Andrew Anagnost
The attention the Forge development platform received
AEC and construction seemed to take center stage for much of the event and the exhibit floor
Generative design and Fusion 360 were emphasized on the manufacturing side of the business
The Internet of Things (IoT) is getting a lot of attention fro Autodesk and will be coming out of the shadows very soon
The “cloud” was everywhere, including the addition of AnyCAD into Fusion 360
I’ll briefly discuss each of these bulleted items, but will cover each of them in more detail in coming weeks
Words From The New CEO
Having been the President and CEO of Autodesk since June, Andrew Anagnost took the stage the first day of AU in his relatively new role to talk about the theme of this year’s AU, which was designing more things, designing better things, and accomplishing this with less — materials, staff, resources, and time.
Andrew Anagnost, AU 2017 Keynote
Anagnost said the panacea for making this happen is automation that will actually increase jobs and productivity. We shouldn’t be so concerned about if automation take our jobs as we should be of the opportunities of where automation will take us. With so much happening so quickly on the automation and technology fronts, the problem is not so much a scarcity of jobs as it is a scarcity of skills to benefit from the opportunities.
An interesting numerical comparison he made that back in the day there were approximately 300,000 drafters in design, manufacturing, and architecture. Compare that to today’s approximately 10,000,000 design software users and you appreciate how things have changed by the sheer number of people involved on the creative design side.
This week Autodesk also announced that it has formed a new partnership with Village Capital to fund the creation of their workforce development and transition initiative, focused on entrepreneurship, job training, and upskilling in a world of automation. The company is also teaming up with LinkedIn Learning to offer free access to more than 40 courses in multiple languages, relevant to the architecture, infrastructure, construction, and manufacturing industries.
Technology can accelerate solutions to our most pressing problems, such as anticipated global population growth of 30 percent by 2050, but only if people are prepared work with machines in new ways. These are the latest moves in Autodesk’s efforts to prepare the workforce to thrive in a future that will require people to make and build more, do it better, and with less negative impact on the world.