Open side-bar Menu
 Jeff's MCAD Blogging

Posts Tagged ‘iMachining’

SolidCAM: Solid Past, Solid Future

Thursday, April 9th, 2015

We talk with dozens of CAx vendors monthly and on an ongoing basis so we can (hope to) stay current with new features and capabilities. We have also noted for several years the ongoing consolidation of CAx vendors. When I blogged specifically a couple months ago about the CAM segment entitled, “CAM Consolidation 2015: The Circle Continues To Get Smaller,” only one vendor challenged me that it was always independent and would remain so – SolidCAM. That statement piqued my interest, so I thought I better follow up to see how they would substantiate their insistence.

The following video demonstrates a 3D car model machined in C45 steel roughed with iMachining 3D technology, which SolidCAM claims saves >70% of machining time. The car model is finished using SolidCAM 5-Axis simultaneous – all integrated into SolidWorks.


SolidCAM iMachining & Simultaneous 5X-Milling of a Car Model

 Shortly after SolidWorks World, I spoke with SolidCAM’s founder and CEO, Emil Somekh, in a lively and candid conversation that set a number of things straight specifically about SolidCAM, as well as the CAM industry in general.


SolidCAM iMachining: A Wizard At Higher Efficiency and Reduced Tool Wear

Wednesday, April 24th, 2013

Today I saw a demonstration of SolidCAM’s newest version of its iMachining technology. The co-hosts of the presentation were Shaun Mymudes, COO, North America and Ken Merritt, senior application engineer.

After a little SolidCAM iMachining theory, the science of cutting angle, and how it’s different from the competition, a live demonstration via webcam began with new iMachining software controlling a Hurco VMX42 HSi machining center. A tool running at 10,000 RPM and traveling at between 85-200 inches per minute cut and finished a pocketed part of 1018 steel in pretty short order.

Owing to iMachining’s unique tool motion control algorithms and variable cutting angle, the presenters said (and showed) significant improvement in cycle time efficiency/time savings (in this case, more than 70%), as well as reduced tool wear.

After the live demo, it was time to see some of the features and capabilities of the software.



TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise