July 23rd, 2015 by Jeff Rowe
For a number of reasons, I have been a fan of mobile workstations, so I was very interested in taking a quick look at a new machine from BOXX that is truly mobile .
The GoBOXX 15 G1980 is relatively thin. It’s the thinnest and lightest laptop BOXX has ever offered, weighing in at 4.36 pounds and 0.78 inches thick.
The backlit keyboard is nicely laid out with large wrist rest and trackpad areas. However, the letters on the keys takes a little getting used to, as the font on them looks a little like something from the movie, The Matrix.
As with all BOXX mobile workstations we have reviewed in the past, screen resolution and color were very good with the GoBOXX 15 G1980.
GoBOXX 15 G1980
Its fan runs when the system gets taxed, but does not run all of the time, and is fairly quiet with no obnoxious whining sound frequency.
With programs running and WiFi on and operating, I averaged about 4.25 hours of battery life. Not bad, but also not great compared to some other mobile workstations I’ve used lately.
While smaller (thinner profile) than previous BOXX mobile workstations we have evaluated, the AC adapter is still quite large. I know to a great extent this can’t be helped, but it just gets a bit annoying to have to lug something this big around to work as part of a “mobile” package.
July 16th, 2015 by Jeff Rowe
MSC Software Corp. recently announced a new release of MSC Apex, the company’s newest CAE platform. The MSC Apex Cheetah release introduces:
Both MSC Apex products, Modeler and Structures are complementary to Patran and MSC Nastran, if you feel the need to go a step further in CAE. If you need this additional capability, the Apex products do not expose you intellectual property (IP) to those who have no business being exposed to it.
According to the company, the new release enhances workflow and daily productivity with several modeling and analysis capabilities, and gives you the ability to perform design analysis more comprehensively and easily.
To get a better feel for these claims, we spoke with said Hugues Jeancolas, MSC Apex Product Manager who said, “Cheetah is a milestone release for MSC Apex, now delivering its first solver integrated solution for interactive and incremental structural analysis. Modeling, validating, solving, and exploring designs has never been this efficient and easy. MSC Apex helps users to crush the amount of time that it normally takes to build and validate models, a task that does not add any value to the design process. This frees our users to focus on delivering not just acceptable designs but ones that are optimal – in an environment that is fun to use.”
CAE, fun to use? That may be a bit of a stretch, but the demos we have seen make the claim a bit easier to swallow.
July 9th, 2015 by Jeff Rowe
For many years all of the major CAD vendors have been touting the importance of managing the mountains of design, engineering, and manufacturing data created using their software. Conversely, most manufacturing organizations, large and small, have made the transition from 2D to 3D and are finally investigating how to best manage these mountains of CAD and associated product development data beyond files, folders, Excel spreadsheets, Window Explorer, and FTP servers.
It is estimated that approximately 70% of commercial CAD seats today still are not connected to any product data management (PDM) system, and the CAD/PDM/PLM companies are very aware of this situation and are doing everything possible to change it. It has come down to an aggressive SMB-marketing of existing “scaled down” or “right-sized” PLM solutions, as well as introducing of new opportunities by leveraging cloud and open source solutions.
The biggest challenge in the SMB space is promoting an answer to the question, “Why change?” At the end of the day, if a company can get things done by using Excel, Office and email, a very compelling alternative solution to change is needed. Small doesn’t necessarily mean simple. Small- and medium-sized business is complicated and competitive. Cost and implementation challenges are still two key elements that every vendor struggles with when trying to provide a viable PDM solution for SMBs.
Various sources claim the following benefits of PDM, including:
While these are impressive figures, many SMBs are still not convinced of the benefits of PDM and remain on the fence as to whether to implement it or not. This indecision presents both a challenge and an opportunity for making believers of SMBs in PDM.
Generic Product Data Management Overview (From Wikipedia)
Organizations implement PDM for many different reasons, but virtually all implement with common goals, including:
The two biggest words and phrases that resonate with SMBs regarding PDM are “preconfigured process workflow” and “design reuse.”
July 2nd, 2015 by Jeff Rowe
Without a doubt, one of the biggest developments in the MCAD world in the past few years has been 3D printing (also known as additive manufacturing). Until relatively recently, though, the cost of the 3D printing machines was cost prohibitive for all but large companies. To a large extent, costs have been plummeting, but there are machines that cost more than a million dollars. However, that is changing with the advent of relatively low-cost desktop 3D printers.
3D printers sound cool, and to a large extent they are. But, before running out to buy one, there are a few things to keep in mind. Currently, a machine will set you back $500 to $5,000, plus $40 to $100 for a roll of plastic filament (think Weed Wacker) for producing parts. Also keep in mind that producing one small object could take hours, and end up costing much more than buying it. Don’t forget, too, that you need some technical know-how to make it all work, including how to create a solid model with a CAD tool. As I have maintained for some time, with all the online 3D printing services that are available, why buy when you can rent. Check out my blog post on this sentiment from last year entitled, “3D Printing Goes Retail: Why Buy When You Can Rent?”
Being the smiling skeptic that I am, I also wrote a blog entitled “Is 3D Printing Really A Miracle?” My short answers are “Yes” and “No.”
That’s why I have said that the first low-cost devices were more fun than functional, and appealed to DIYers, hobbyists, and early adopters. All that is changing as the technology matures, prices come down, more materials become available, and part quality vastly improves.
Desktop 3D Printers
June 25th, 2015 by Jeff Rowe
With all of the buzz that the Internet of Things (IoT) has generated, a number of our readers have asked if there was anything available for experimenters who may have interest, but not a lot of money to spend on exploring the technology. Until recently, the answer would have been, “No.” However, that all changed this month with the availability of the ARM® mbed™ IoT Starter Kit-Ethernet Edition from ARM Ltd.
In the 1980s British computer manufacturer Acorn Computers first developed the Acorn RISC Machine (ARM) architecture for its personal computers.
A reduced instruction set computing (RISC)-based computer design approach with ARM processors require significantly fewer transistors than typical complex instruction set computing (CISC) x86 processors in most personal computers. This approach reduces costs, heat and power use. Such reductions are desirable traits for light, portable, battery-powered devices and other embedded systems. A simpler design facilitates more efficient multi-core CPUs and higher core counts at lower cost, providing improved energy efficiency for servers.
ARM Holdings develops the instruction set and architecture for ARM-based products, but does not actually manufacture products itself.
ARM core processors are used in a wide range of products including the Microsoft Surface tablet, Apple’s iPad, iPhone, and iPod, ASUS tablets, Canon PowerShot digital cameras, and Nintendo DS handheld game consoles. In a word, ARM cores are everywhere.
ARM Processor – Sowing the Seeds of Success
June 18th, 2015 by Jeff Rowe
A couple of weeks ago I attended the Hexagon Global Network (HxGN) 2015 Live conference. Although not held in my favorite destination, Las Vegas, this was an opportunity for my first direct exposure to Hexagon. In a word, I was not disappointed. In fact, the experience went far beyond my modest expectations that I had before attending the event.
I went to HxGN specifically for the metrology (science of measurement) portion of the conference with regard to sensing, inspection, QA, and reverse engineering applications – in other words what Hexagon Metrology is all about. However, metrology was not the only area represented, as the company known as Hexagon AB also has a huge presence with its hardware, software, and services in other industry segments, such as geospatial (GPS and surveying); process, power, and marine (PP&M); and security, government, and infrastructure (SG&I). It was a lot to take in and I focused on industrial metrology and related technologies – sensors and software used for optimizing manufacturing processes and throughput.
Founded in 1992 and headquartered in Stockholm, Sweden, Hexagon AB has offices in 46 countries, 15,000+ total employees, and is R&D focused with 11% of net sales and more than 3,400 employees invested in R&D. The industrial side of Hexagon AB, known as Industrial Enterprise Solutions (IES), that includes manufacturing and industrial plant facilities accounts for about half of the company’s sales. Roughly one third of Hexagon’s business is derived from metrology.
HxGN LIVE 2015 Conference
June 11th, 2015 by Jeff Rowe
The pressing need for engineers of virtually all disciplines has become increasingly urgent as relatively few students view and pursue engineering as a career. Business seems more attractive to many, and yeah, there’s always psychology (the “new” liberal arts degree) that has a lot of sellers, but relatively few buyers, at least at the BA/BS level.
Yes, engineering education and engineers are vital for keeping our technological world moving ahead, but who keeps the underlying machinery, tools, and software moving at all? Technicians.
Whether you recognize them, or not, there are technicians in just about every field and industry. For example, automotive mechanics, machinists, cosmetologists, electricians, emergency medical technicians (EMTs) — the list is about endless. If it’s “technical,” the odds are extremely good that there is a technician involved somewhere in the chain, and that may include many links in the chain.
So, what exactly is a technician?
Technicians can be classified as either highly skilled or semi-skilled workers, and are usually an integral part of a larger process. They work in a variety of fields, and they usually have a job title with the designation “technician” following the particular category of work. For example, an engineering technician is a highly skilled, highly educated occupation requiring several years of post high school training in a formal apprenticeship and probably college (usually two year) for further education.
Experienced technicians in a specific domain typically have at least an intermediate understanding of theory and expert proficiency in technique. Because of this practical knowledge, technicians are generally better versed in technique compared to average laymen and even general professionals in that field of technology, namely engineers, for whom theory often trumps practice.
What is the Future of (Automotive) Technicians?
June 4th, 2015 by Jeff Rowe
About a month ago I spent a few days in Boston at PTC’s LiveWorx 2015 event. It was an eye opener for me and a brief look into the future of PTC with its growing emphasis and dependence on the Internet of Things (IoT).
Recaps of the event, entitled LiveWorx 2015: PTC Drives Home Its IoT Future – Part 1 and PTC ThingWorx Converges On IoT were published shortly after the event last month.
Beyond the technologies and business strategies presented, what struck me was the relatively young crowd attending with relatively young PTC PR people pushing the IoT platform. Sold out with over 2,300 attendees (up from ~350 in 2014), the draw was similar or maybe more than this year’s PTC Live Global user event. Although Creo and Windchill were certainly present at LiveWorx, they took a back seat to IoT offerings, such as ThingWorx, Axeda, and others.
So what does IoT really mean? I don’t know either because it’s evolving so rapidly and all participating vendors define it so that it accommodates what they offer best. In other words, until standards are established, the definition continues to evolve. I will admit, however, that PTC currently has a leg up on virtually all of the competition for IoT in its traditional design, engineering, and manufacturing space.
A standard definition is in the works, however, and IoT generally refers to uniquely identifiable objects and their virtual representations in an Internet-like structure. The term Internet of Things was proposed by Kevin Ashton in 1999, although the concept has been discussed since 1991, so it’s not exactly brand new.
According to PTC, the Internet of Things has the potential to create trillions of dollars of new economic value in the coming decade. To capture this value, manufacturers will rely on new applications that enable the creation of smart, connected products, thus PTC’s interest and commitment, as shown in the brief video below.
PTC’s Vision for Smart, Connected Products
Read the rest of IoT and PTC’s Brave New World
May 28th, 2015 by Jeff Rowe
An independent consulting firm and industry source that we know quite well, Wohlers Associates, Inc., recently released the Wohlers Report 2015, the company’s annual detailed analysis of additive manufacturing (AM) and 3D printing worldwide. According to the Report, in 2014, interest in 3D printing reached an unprecedented level and exceeded the $4 billion milestone. The phenomenal attention to AM began in 2012, was sudden, and has continued to proliferate since then.
Wohlers Associates is widely recognized as the leading consulting firm and foremost authority on additive manufacturing and 3D printing. This annual publication has served as the undisputed industry-leading report on the subject for two decades. Over the 20 years of its publication, many have referred to the report as the “bible” of additive manufacturing (AM) and 3D printing—terms that are used interchangeably by the company (and industry).
Wohlers Report 2015
The market for additive manufacturing, consisting of all AM products and services worldwide, grew at a compound annual growth rate (CAGR) of 35.2% to $4.1 billion in 2014, according to Wohlers Report 2015. The industry expanded by more than $1 billion in 2014, with 49 manufacturers producing and selling industrial-grade AM machines. The CAGR over the past three years (2012–2014) was 33.8%.