Archive for the ‘Uncategorized’ Category
Wednesday, August 20th, 2014
We just returned from one of the most interesting events of the year for us and one that we always look forward to – SIGGRAPH 2014. SIGGRAPH (short for Special Interest Group on GRAPHics and Interactive Techniques) is the name of the annual conference on computer graphics (CG) convened by the ACM SIGGRAPH organization.
The first SIGGRAPH conference was in 1974, and this year’s event was held in beautiful Vancouver, British Columbia.
As usual, we found the most interesting aspects of the conference to be the SIGGRAPH Emerging Technologies program and the exhibit floor.
SIGGRAPH 2014 Emerging Technologies Preview
Wednesday, August 6th, 2014
In just about any industry or market segment you can think of, the words “cloud,” “mobile,” and “app” are about as ubiquitous as it gets. PLM is proving no different, although acceptance and implementation seem slow in coming. However, the tide is beginning to turn.
PLM, of course has received considerable support from large organizations, and is finally being embraced by significant numbers of SMBs. To date, the two biggest obstacles for SMBs considering PLM, much less implementing it, have been cost and complexity – whether real or perceived.
Although hardly the first or only one, a couple years ago Autodesk launched a major effort to bring PLM to the SMB masses with the introduction of cloud-based PLM 360. More recently it launched a PLM 360 app for iOS and Android mobile devices.
Autodesk PLM 360 Mobile App Overview
Wednesday, July 30th, 2014
If you’ve been around the technical/engineering software business as long as I have, as with any business, nothing stays the same. This includes founders, executives, and other major players who were once prominent in the industry, but for many reasons have moved on. Some, to other companies in the industry, some to other industries, and some who have just plain disappeared. History never stands still and the CAx industry is no exception.
Although it’s a bit dated and based on a research project, check out the video below for a very short recap on the history of CAD:
A Short History of CAD
During the coming weeks and months we’ll try and track down players who were formerly very prominent in the MCAD arena and see what they’re up to now. Some of these folks include:
- John Walker – Autodesk
- Mike Riddle – Autodesk
- Carol Bartz – Autodesk
- Dominic Gallello – Autodesk
- Dick Harrison – PTC
- Steve Walske – PTC
- Jim Meadlock – Intergraph
- Joe Costello – Think3
- Pat Hanratty — MCS
- Martin Newell – Ashlar
- Jon Hirschtick – SolidWorks
- John McEleney — SolidWorks
- Jeff Ray – SolidWorks
- Jason Lemon – SDRC
- Fontaine Richardson – Applicon
- John Wright – United Computing (later Unigraphics)
- Thomas Curry – MSC Software
- Robert Bean – CADKEY
Obviously, this list only scratches the surface of possibilities. If there is anyone currently or formerly renowned in the CAD/CAM/CAE/CAx industry you would like to see us track down and update what they’re up to, send an email to me at firstname.lastname@example.org with a subject line that reads, “Where Are They Now?”, and we’ll do our best to respond in an upcoming blog on a person’s whereabouts and more recent accomplishments.
Friday, July 25th, 2014
It appears that PTC is wading deeper into Internet of Things (IoT) waters with the announcement that it has signed a definitive agreement to acquire privately-held Axeda Corp., a pioneer in the development of technologies that connect machines and sensors to the cloud. Paying approximately $170 million in cash, PTC’s primary motivations behind the acquisition are Axeda’s innovative technology, customer base, and partnerships that could directly complement the PTC ThingWorx business across the entire Internet of Things technology stack.
Axeda IoT ROI and Value Curve Overview
Tuesday, July 22nd, 2014
Hexagon AB, a provider of design, measurement (metrology), and visualization technologies has acquired Vero Software, a provider of CAM software.
Hexagon AB is a global technology group headquartered in Sweden and was founded in 1992. The diverse provides products for designing, measuring, and positioning objects. Surveyors, government agencies, mapping companies, construction, and security and defense related industries are the primary customers of their services.
Although the following video doesn’t have an audio track, it does demonstrate one of Vero Software’s technologies, WorkNC, that is part of the acquisition by Hexagon.
WorkNC CADCAM and Vero Software – EMO Show 2013
One of the Hexagon’s main focuses is on precision measuring technologies and is divided into three business areas: Geospatial Measuring (Surveying and GPS), Industrial Metrology (Hexagon Metrology), and Technologies. The company markets its products and services under more than 35 different brands worldwide.
Hexagon’s operations encompass hand tools, fixed and portable coordinate measuring machines, GPS systems, construction machine control systems, level meters, laser meters, total stations, sensors for airborne measurement, aftermarket services and software systems.
Hexagon’s macro products are used within construction and engineering industries, while micro products are used primarily by automotive and aerospace industries, medical industries and design industry. Hexagon’s other operations focus on supplying components primarily to the heavy automotive industry as well as key components for industrial robots.
Vero Software is a leader in CAD CAM software. Vero develops and distributes software for aiding design and manufacturing processes, providing solutions for the tooling, production engineering, sheet metal, metal fabrication, stone and woodworking industries. Several well-known brands in Vero Software’s portfolio brands include Alphacam, Cabinet Vision, Edgecam, Machining STRATEGIST, PEPS, Radan, SMIRT, SURFCAM, VISI, and WorkNC, along with the production control MRP system Javelin.
Despite the diversity of Vero’s applications, they all address the rising challenges of achieving manufacturing efficiencies.
The acquisition strengthens Hexagon’s software offerings, providing the means to close the gap of making quality data fully availableby extending the reach of the newly developed MMS (metrology planning software) to include CAM (manufacturing planning software).
Subject to regulatory approval, Vero Software will be fully consolidated as of August 2014.
This constant flow of acquisitions sure make for interesting times. For example, earlier this year CAE giant ANSYS acquired SpaceClaim, and now Hexagon acquires Vero. As much as anything, I think these acquisitions illustrate the desire for technical organizations to diversify when it makes sense for symbiotic relationships. Instead of trying to corner a market by acquiring all competitors, more and more technical software acquisitions seem to be happening with technologies that complement existing product offerings, not just expand similar lines of offerings.
Thursday, July 17th, 2014
This week Deloitte University Press announced the launch of a massive open online course (MOOC) on the business implications of additive manufacturing (AM). Entitled, “3D Opportunity: The Course on Additive Manufacturing for Business Leaders,” it is the first course of its kind to be offered by a large professional services firm and is designed to help educate the market on the business drivers behind additive manufacturing/3D printing.
3D opportunity: Deloitte’s MOOC on additive manufacturing (3D Printing) for business
Tuesday, July 15th, 2014
Dassault Systemes announced this week that it has acquired simulation technology provider SIMPACK in an all cash deal. The transaction was completed on July 10, 2014. Not surprisingly, financial details of the deal were not revealed.
With the acquisition of Munich-based SIMPACK, Dassault continues to expand its multiphysics simulation technology portfolio to include multi-body mechatronic systems.
SIMPACK has more than 130 customers in the energy, transportation (primarily automotive and rail), and biomedical industries, including Alstom, Bombardier, BMW, Daimler, Honda, Jaguar Land Rover, MAN, and Vestas.
SIMPACK Multibody Simulation (MBS) – Engine Chain
Wednesday, July 9th, 2014
Is 3D printing truly the miracle it’s purported to be?
That’s a question I’ve asked myself numerous times, especially when I see yet another announcement from a hardware or software vendor or service provider that is often hype and little else. A lot of companies (and their marketing/PR/communications engines) count on the fact that just about anything that states or implies “3D printing” is going to automatically generate “a buzz” of notoriety, and maybe even some venture capital.
On one hand, yes, 3D printing has shown great promise and results. But, on the other, it’s largely wait and see.
Many have been lured into the promise of 3D printing with sensationalistic demonstrations as shown in the following video.
3D Printing: Make Anything You Want
Tuesday, July 1st, 2014
Editor’s Note: This is the fourth installment of a series of four evaluation articles of CAD/PDM systems for SMBs.
PTC Windchill PDM Essentials is intended to bring collaborative engineering to smaller companies for organizing and managing product content so that they can improve design reuse, broaden access to product information across roles, and ensure control over design versions and release processes.
PDM Essentials is basically a role-based, template-based, pre-configured bundle in an optimized Microsoft Windows environment.
PTC Windchill PDM Essentials is a scaled-down version of PDMLink, Windchill’s primary data management solution, allowing smaller firms to manage CAD data and product development-related Microsoft Office documents.
Windchill PDM Essentials Quick Tour Video
Friday, June 27th, 2014
During the course of a year I get the opportunity to attend several events and meet a lot of new people involved with various aspects of design, engineering, and manufacturing. This week I attended an event called “3D Printing Day @ CSU.” Held on the campus of Colorado State University, it showcased the Idea-2-Product Laboratory, the brainchild of its director, and our good friend, Dr. David Prawel. It was a combination seminar series and tours of the Lab where a number of 3D printers were demonstrated.
One of the most interesting and compelling seminar talks was given by Easton LaChappelle, a 17-year-old from Mancos, CO who graduated from high school last month. His talk was on his experience with 3D printing, prosthetics, and telerobotics
Easton LaChappelle – Montage