Open side-bar Menu
 Jeff's MCAD Blogging

Archive for February 20th, 2014

3D Printers Rule at SolidWorks World — Part 2

Thursday, February 20th, 2014

Last time we covered the introduction of the the MarkForged Mark One that can print parts with carbon fiber filament. This time around we’ll discuss the Stratsys Objet500 Connex3 3D printer that can produce multi-material/multi-color parts.

Before the conference officially commenced, Stratasys formally introduced its new Objet500 Connex3 3D printer. For a pre-event event, it was well attended by those interested in Stratasys’ new 3D printer.

The Objet500 Connex3 Color Multi-material 3D Printer features a unique triple-jetting technology that combines droplets of three base materials to produce parts with a myriad combinations of rigid, flexible, and transparent color materials, as well as color materials — all in a single print run. This ability to achieve the characteristics of an assembled part without assembly or painting is a significant technological achievement and time-saver.

Connex3 uses a print block with eight print heads — two for each material, including supports. This technique leaves six print heads for three model materials. The print heads deposit material droplets in a pre-defined pattern to create combinations from as many as three base materials. The patterns yield digital materials that are more than just a simple blending of the base materials.

(more…)

SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise