Open side-bar Menu
 Industry Commentary
Dr. Russ Henke
Dr. Russ Henke
The writer of the following article has posted over 100 articles on EDACafe.com since 2003, in the form of Quarterly Commentaries on the worldwide EDA and EDA IP Industries as well as monthly Editorials covering vendors, products, finances and new developments. Beginning April 2012 these … More »

EDA & MCAD/MCAE Industry Mini-Almanac – Nominal Q4 2011

 
May 8th, 2012 by Dr. Russ Henke

Go directly to the latest EDA & MCAD/MCAE Industry Mini-Almanac – Nominal Q4 2011 via:
http://www10.edacafe.com/blogs/edaindustrycommentary/archives/106

Since 1996, Dr. Russ Henke has been active as president of HENKE ASSOCIATES, a San Francisco Bay Area high-tech business & management consulting firm. The number of client companies served by Henke Associates during those years now numbers close to fifty. Engagement lengths have varied from a few weeks up to ten years and beyond.

During his previous corporate career, Henke operated sequentially on “both sides” of MCAE/MCAD and EDA, as a user and as a vendor. He’s a veteran corporate executive from Cincinnati Milacron (Research Scientist – Oakley, OH), SDRC (President & COO – Fairfax, OH & Milford, OH), Schlumberger Applicon (Executive VP – Burlington, MA), Gould Electronics Imaging & Graphics (President & General Manager – San Jose, CA), ATP (Chairman and CEO – Campbell, CA), and Mentor Graphics Corporation (VP & General Manager – PCB Division San Jose, CA & Professional Services Division – Wilsonville, OR).

Henke is a Fellow of the Society of Manufacturing Engineers (SME) and served on the SME International Board of Directors. Henke was also a board member of SDRC, PDA, ATP, and the MacNeal Schwendler Corporation, and he currently serves on the board of Stottler Henke Associates, Inc. (San Mateo, CA). He also serves as VP Business Development of Stottler Henke, focused on commercial applications of artificial intelligence.

In addition, Henke is a member of the IEEE and a Life Fellow of ASME International. In April 2006, Dr. Henke received the 2006 Lifetime Achievement Award from the CAD Society, presented by CAD Society president Jeff Rowe at COFES2006 in Scottsdale, AZ. In February 2007, Henke became affiliated with Cyon Research’s select group of experts on business and technology issues as a Senior Analyst. This Cyon Research connection aids and supplements Henke’s ongoing, independent consulting practice (HENKE ASSOCIATES). Dr. Henke is also a contributing editor of the EDACafé EDA WEEKLY, and he published EDA WEEKLY articles every four weeks from November 2009 to March 2012; all URL’s available. Similar Articles and Blogs continue on both EDACafé and MCADCafé from April 2012 onward.

Since May 2003 HENKE ASSOCIATES has also published more than 100 independent COMMENTARY articles on MCAD, PLM, EDA and Electronics IP on IBSystems’ MCADCafé and EDACafé; most URL’s available.

Information on HENKE ASSOCIATES is available at http://www.henkeassociates.net.

March 31, 2012 marked the 16th Anniversary of the founding of HENKE ASSOCIATES. « Less

Hi Folks!  Just an announcement today. The recent changes in formatting of MCADCafe.com have resulted in the relegating past and current Henke Associates’ MCAD Almanacs, MCAD/MCAE Commentaries, and former EDA & MCAD/MCAE Almanacs to be accessed via the Editorials button on the MCADCafe.com main Internet site, then click on MCAD Commentary.

Or scan through the latest blogs until you find a blog from yours truly, and you can access the latest post of the latest article via a direct hot link.

For example, you may go directly to the latest EDA & MCAD/MCAE Industry Mini-Almanac – Nominal Q4 2011 via:

http://www10.edacafe.com/blogs/edaindustrycommentary/archives/106

Related posts:

Leave a Reply

SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise