Books found with the word 'David'


Cam Jansen: the Mystery of the Gold Coins #5

Cam Jansen: the Mystery of the Gold Coins #5

by David A. Adler, Published 07/2004
A Guide to Writing as an Engineer

A Guide to Writing as an Engineer

by David F. Beer,David A. McMurrey, Published 03/2009
Vector Mechanics for Engineers: Statics

Vector Mechanics for Engineers: Statics

by Ferdinand Beer, Jr., E. Russell Johnston, Elliot Eisenberg, David Mazurek, Published 01/2009
Python Cookbook

Python Cookbook

by Alex Martelli, Anna Ravenscroft, David Ascher, Published 03/2005
System Dynamics: An Introduction

System Dynamics: An Introduction

by Derek Rowell, David N. Wormley, Published 10/1996
Introduction to Mechatronics and Measurement Systems (Engineering Series)

Introduction to Mechatronics and Measurement Systems (Engineering Series)

by David Alciatore, Michael Histand, Published 11/2005
Democracy Under Pressure, Alternate Edition (with PoliPrep)

Democracy Under Pressure, Alternate Edition (with PoliPrep)

by Milton C. Cummings, David Wise, Published 01/2005
The Mechanical Design Process

The Mechanical Design Process

by David Ullman, Published 07/2002
Computer Architecture: A Quantitative Approach, 4th Edition

Computer Architecture: A Quantitative Approach, 4th Edition

by John L. Hennessy, David A. Patterson, Published 09/2006
Technical Drawing and Engineering Communication (Applied English)

Technical Drawing and Engineering Communication (Applied English)

by David E. Goetsch, William S. Chalk, Raymond L. Rickman, John A. Nelson, Published 11/2008
CMOS VLSI Design: A Circuits and Systems Perspective (3rd Edition)

CMOS VLSI Design: A Circuits and Systems Perspective (3rd Edition)

by Neil Weste, David Harris, Published 05/2004
AutoCAD 2010 For Dummies

AutoCAD 2010 For Dummies

by David Byrnes, Published 05/2009
The Nature and Aesthetics of Design

The Nature and Aesthetics of Design

by David Pye, Published 01/2000
The Mechanical Design Process

The Mechanical Design Process

by David G. Ullman, Published 01/1997
Introduction to Simulation and Risk Analysis

Introduction to Simulation and Risk Analysis

by James R. Evans, David L. Olson, Published 01/1998
Engineering Computation with MATLAB (2nd Edition)

Engineering Computation with MATLAB (2nd Edition)

by David M. Smith, Published 01/2009
The Design of High-Efficiency Turbomachinery and Gas Turbines (2nd Edition)

The Design of High-Efficiency Turbomachinery and Gas Turbines (2nd Edition)

by David Gordon Wilson, Theodosios Korakianitis, Published 01/1998
Curves and Surfaces for Computer Graphics

Curves and Surfaces for Computer Graphics

by David Salomon, Published 09/2005
Engineering Design with SolidWorks 2010 and Multimedia CD

Engineering Design with SolidWorks 2010 and Multimedia CD

by David C. Planchard, Marie P. Planchard, Published 01/2010
AutoCAD 2009 For Dummies

AutoCAD 2009 For Dummies

by David Byrnes, Published 04/2008
AutoCAD and Its Applications - Basics 2010

AutoCAD and Its Applications - Basics 2010

by Terence M. Shumaker, David A. Madsen, David P. Madsen, Published 07/2009
CATIA Version 5, Release 14 & 15, Design & Engineering

CATIA Version 5, Release 14 & 15, Design & Engineering

by David S. Kelley, Published 11/2005
Practical FPGA Programming in C

Practical FPGA Programming in C

by David Pellerin, Scott Thibault, Published 05/2005
Engineering Design with SolidWorks 2008 & MultiMedia CD

Engineering Design with SolidWorks 2008 & MultiMedia CD

by David C. Planchard, Marie P. Planchard, Published 11/2007
A Commands Guide Tutorial for SolidWorks 2010

A Commands Guide Tutorial for SolidWorks 2010

by David C. Planchard, Marie P. Planchard, Published 11/2009
SolidWorks 2007 Tutorial

SolidWorks 2007 Tutorial

by David C. Planchard, Marie P. Planchard, Published 02/2007
Engineering Design with SolidWorks 2009 and MultiMedia CD

Engineering Design with SolidWorks 2009 and MultiMedia CD

by David C. Planchard, Marie P. Planchard, Published 12/2008
SolidWorks 2009 Tutorial with MultiMedia CD

SolidWorks 2009 Tutorial with MultiMedia CD

by David C. Planchard, Marie P. Planchard, Published 02/2009
SolidWorks 2008 Tutorial with MultiMedia CD

SolidWorks 2008 Tutorial with MultiMedia CD

by David C. Planchard, Marie P. Planchard, Published 01/2008
A Commands Guide for SolidWorks 2009

A Commands Guide for SolidWorks 2009

by David Planchard, Marie Planchard, Published 11/2008
Inside SolidWorks 2003

Inside SolidWorks 2003

by David Murray, Published 12/2002
A Commands Guide For Solidworks 2008

A Commands Guide For Solidworks 2008

by David Planchard, Marie Planchard, Published 11/2007
SolidWorks 2009: The Basics with MultiMedia CD

SolidWorks 2009: The Basics with MultiMedia CD

by David C. Planchard, Marie P. Planchard, Published 03/2009
Industrial Materials: Volume 2, Polymers, Ceramics and Composites

Industrial Materials: Volume 2, Polymers, Ceramics and Composites

by David A. Colling, Thomas Vasilos, Published 03/1995
Drawing and Detailing with SolidWorks 2009

Drawing and Detailing with SolidWorks 2009

by David C. Planchard, Marie P. Planchard, Published 04/2009
Autodesk Inventor 7: Basics Through Advanced

Autodesk Inventor 7: Basics Through Advanced

by David P Madsen, Published 10/2003
A Commands Guide Tutorial for SolidWorks 2007

A Commands Guide Tutorial for SolidWorks 2007

by David C. Planchard, Marie P. Planchard, Published 11/2006
Assembly Modeling with SolidWorks 2008

Assembly Modeling with SolidWorks 2008

by David C. Planchard, Marie P. Planchard, Published 06/2008
Autodesk Inventor 5/5.3: Basics Through Advanced

Autodesk Inventor 5/5.3: Basics Through Advanced

by David P. Madsen, David P Madsen, Published 10/2002
Machining Activities with SURFCAM

Machining Activities with SURFCAM

by David Boyt, Published 06/2005
Architectural Desktop 3.0/3.3

Architectural Desktop 3.0/3.3

by David A. Madsen, Ron Palma, Published 02/2002
Drawing and Detailing with SolidWorks 2008

Drawing and Detailing with SolidWorks 2008

by David C. Planchard, Marie P. Planchard, Published 02/2008
Strength and Fracture of Engineering Solids (2nd Edition)

Strength and Fracture of Engineering Solids (2nd Edition)

by David K. Felbeck, Anthony G. Atkins, Published 12/1995
Computational Electromagnetics for RF and Microwave Engineering

Computational Electromagnetics for RF and Microwave Engineering

by David B. Davidson, Published 07/2008
Autocad And Its Applications: Advanced

Autocad And Its Applications: Advanced

by Terence M. Shumaker, David A. Madsen, Published 03/2006
Exploring Cadkey/Book and 2 Disk

Exploring Cadkey/Book and 2 Disk

by David C. Reichard, Published 11/1989



Featured Video
Jobs
Sr. Mechanical Engineer for Kateeva at Newark, CA
Mgr Mechanical Engineering 2 for Northrop Grumman at Melbourne, FL
Senior Design Engineer for Kaman at Gilbert, AZ
MECHANICAL ENGINEER for Peter R. Thom and Associates at ORINDA, CA
Upcoming Events
Solidworks World 2017 at Los Angeles CA - Feb 5 - 8, 2017
Design & Manufacturing at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise