« Prev | 1 2 3 4 5 6 | Next »

Nudge: Improving Decisions About Health, Wealth, and Happiness

Nudge: Improving Decisions About Health, Wealth, and Happiness

by Richard H. Thaler, Cass R. Sunstein, Published 02/2009
CNC Programming Handbook, Third Edition

CNC Programming Handbook, Third Edition

by Peter Smid, Published 11/2007
MATLAB: An Introduction with Applications

MATLAB: An Introduction with Applications

by Amos Gilat, Published 01/2008
Agile Estimating and Planning

Agile Estimating and Planning

by Mike Cohn, Published 11/2005
Combinatorial Optimization: Algorithms and Complexity (Dover Books on Computer Science)

Combinatorial Optimization: Algorithms and Complexity (Dover Books on Computer Science)

by Christos H. Papadimitriou, Kenneth Steiglitz, Published 01/1998
Theory of Machines and Mechanisms

Theory of Machines and Mechanisms

by John Uicker, Gordon Pennock, Joseph Shigley, Published 02/2010
Cam Jansen: the Mystery of the Gold Coins #5

Cam Jansen: the Mystery of the Gold Coins #5

by David A. Adler, Published 07/2004
Statics and Strength of Materials

Statics and Strength of Materials

by Fa-Hwa Cheng, Published 09/1996
A Guide to Writing as an Engineer

A Guide to Writing as an Engineer

by David F. Beer,David A. McMurrey, Published 03/2009
Statistics for Engineers and Scientists

Statistics for Engineers and Scientists

by William Navidi, Published 01/2007
Buildings across Time: An Introduction to World Architecture

Buildings across Time: An Introduction to World Architecture

by Michael Fazio, Marian Moffett, Lawrence Wodehouse, Published 01/2008
PRENTICE HALL REALIDADES SPANISH STUDENT EDITION LEVEL 2 2004C (English and Spanish Edition)

PRENTICE HALL REALIDADES SPANISH STUDENT EDITION LEVEL 2 2004C (English and Spanish Edition)

by Peggy Palo Boyles,Myriam Met,Richard S. Sayers,Carol Eubanks Wargin, Published 12/2004
Marks' Standard Handbook for Mechanical Engineers 11th Edition

Marks' Standard Handbook for Mechanical Engineers 11th Edition

by Eugene Avallone, Theodore Baumeister, Ali Sadegh, Published 12/2006
Engineering Mechanics: Statics (12th Edition)

Engineering Mechanics: Statics (12th Edition)

by Russell C. Hibbeler, Published 01/2009
Applied Fluid Mechanics (6th Edition)

Applied Fluid Mechanics (6th Edition)

by Robert L. Mott, Published 07/2005
Engineering Materials: Properties and Selection (9th Edition)

Engineering Materials: Properties and Selection (9th Edition)

by Kenneth G. Budinski, Michael K. Budinski, Published 02/2009
Human Dimension & Interior Space: A Source Book of Design Reference Standards

Human Dimension & Interior Space: A Source Book of Design Reference Standards

by Julius Panero, Martin Zelnik, Published 01/1979
Construction Planning, Equipment, and Methods (McGraw-Hill Series in Civil Engineering)

Construction Planning, Equipment, and Methods (McGraw-Hill Series in Civil Engineering)

by Robert Peurifoy, Clifford J. Schexnayder, Aviad Shapira, Published 06/2005
Architecture: From Prehistory to Postmodernity, Reprint (2nd Edition)

Architecture: From Prehistory to Postmodernity, Reprint (2nd Edition)

by Marvin Trachtenberg, Isabelle Hyman, Published 01/2003
Modern Control Systems (12th Edition)

Modern Control Systems (12th Edition)

by Richard C. Dorf, Robert H. Bishop, Published 07/2010
Complexity and Contradiction in Architecture

Complexity and Contradiction in Architecture

by Robert Venturi, Published 01/1977
Introduction to Solid Modeling Using SolidWorks 2010

Introduction to Solid Modeling Using SolidWorks 2010

by William Howard, Joseph Musto, Published 06/2010
Vector Mechanics for Engineers: Statics

Vector Mechanics for Engineers: Statics

by Ferdinand Beer, Jr., E. Russell Johnston, Elliot Eisenberg, David Mazurek, Published 01/2009
Understanding Digital Signal Processing (3rd Edition)

Understanding Digital Signal Processing (3rd Edition)

by Richard G. Lyons, Published 11/2010
Mechanical Design of Machine Elements and Machines

Mechanical Design of Machine Elements and Machines

by Jack A. Collins, Henry R. Busby, George H. Staab, Published 10/2009
Mechanical Vibrations (5th Edition)

Mechanical Vibrations (5th Edition)

by Singiresu S. Rao, Published 09/2010
Design of Machinery with Student Resource DVD

Design of Machinery with Student Resource DVD

by Robert Norton, Published 07/2007
Theory and Design for Mechanical Measurements

Theory and Design for Mechanical Measurements

by Richard S. Figliola, Donald E. Beasley, Published 10/2005
Theory of Vibration with Applications (5th Edition)

Theory of Vibration with Applications (5th Edition)

by William T. Thomson, Marie Dillon Dahleh, Published 08/1997
Milling: A Complete Course (Workshop Practice)

Milling: A Complete Course (Workshop Practice)

by Harold Hall, Published 12/2004
Time-Saver Standards for Interior Design and Space Planning, 2nd Edition

Time-Saver Standards for Interior Design and Space Planning, 2nd Edition

by Julius Panero, Martin Zelnik, Published 07/2001
CNC Control Setup for Milling and Turning:

CNC Control Setup for Milling and Turning:

by Peter Smid, Published 03/2010
Mechanical Engineering Design (McGraw-Hill Mechanical Engineering)

Mechanical Engineering Design (McGraw-Hill Mechanical Engineering)

by Jospeh E. Shigley, Joseph E. Shigley, Charles R. Mischke, Published 11/1988
Principles of Technical Drawing

Principles of Technical Drawing

by Frederick E Giesecke, Published 01/1992
RF Circuit Design, Second Edition

RF Circuit Design, Second Edition

by Christopher Bowick, Published 11/2007
Engineering Formulas

Engineering Formulas

by Kurt Gieck, Reiner Gieck, Published 06/2006
The Science and Technology of Civil Engineering Materials

The Science and Technology of Civil Engineering Materials

by J. Francis Young, Sidney Mindess, Arnon Bentur, Robert J. Gray, Published 11/1997
Machine Elements in Mechanical Design (4th Edition)

Machine Elements in Mechanical Design (4th Edition)

by Robert L. Mott, Published 07/2003
The Structural Basis of Architecture

The Structural Basis of Architecture

by Bjorn N. Sandaker, Arne P. Eggen, Mark R. Cruvellier, Published 02/2011
CATIA V5 Workbook Release 19

CATIA V5 Workbook Release 19

by Richard Cozzens, Published 08/2009
Learning OpenCV: Computer Vision with the OpenCV Library

Learning OpenCV: Computer Vision with the OpenCV Library

by Gary Bradski, Adrian Kaehler, Published 10/2008
System Dynamics: An Introduction

System Dynamics: An Introduction

by Derek Rowell, David N. Wormley, Published 10/1996
Competing Against Time : How Time-based Competition is Reshaping Global Markets

Competing Against Time : How Time-based Competition is Reshaping Global Markets

by Jr. George Stalk, Thomas M. Hout, Published 03/1990
Architectural Graphics

Architectural Graphics

by Francis D. K. Ching, Published 06/2002
Advanced Mechanics of Materials (2nd Edition)

Advanced Mechanics of Materials (2nd Edition)

by Robert Cook, Warren Young, Published 09/1998
Computer Architecture: A Quantitative Approach, 4th Edition

Computer Architecture: A Quantitative Approach, 4th Edition

by John L. Hennessy, David A. Patterson, Published 09/2006
Modeling and Simulation of Dynamic Systems

Modeling and Simulation of Dynamic Systems

by Robert L. Woods, Kent L. Lawrence, Published 03/1997
Python Cookbook

Python Cookbook

by Alex Martelli, Anna Ravenscroft, David Ascher, Published 03/2005
Space Planning Basics

Space Planning Basics

by Mark Karlen, Published 05/2009
The Finite Element Method and Applications in Engineering Using ANSYS®

The Finite Element Method and Applications in Engineering Using ANSYS®

by Erdogan Madenci, Ibrahim Guven, Published 10/2007
Technical Drawing and Engineering Communication (Applied English)

Technical Drawing and Engineering Communication (Applied English)

by David E. Goetsch, William S. Chalk, Raymond L. Rickman, John A. Nelson, Published 11/2008
Engineering Design (Engineering Series)

Engineering Design (Engineering Series)

by George Dieter, Linda Schmidt, Published 03/2008
Product Design and Manufacture

Product Design and Manufacture

by John R. Lindbeck, Published 10/1994
CNC Programming Techniques

CNC Programming Techniques

by Peter Smid, Published 12/2005
Experiencing Architecture

Experiencing Architecture

by Steen Eiler Rasmussen, Published 03/1964
Engineering Drawing And Design

Engineering Drawing And Design

by Cecil Jensen, Jay Helsel, Dennis Short, Published 08/2007
Construction Drawings and Details for Interiors: Basic Skills, 2nd Edition

Construction Drawings and Details for Interiors: Basic Skills, 2nd Edition

by Rosemary Kilmer, W. Otie Kilmer, Published 04/2009
Introduction to Mechatronics and Measurement Systems (Engineering Series)

Introduction to Mechatronics and Measurement Systems (Engineering Series)

by David Alciatore, Michael Histand, Published 11/2005
Manufacturing Engineering & Technology (6th Edition)

Manufacturing Engineering & Technology (6th Edition)

by Serope Kalpakjian, Steven Schmid, Published 04/2009
Product Design and Development

Product Design and Development

by Karl Ulrich, Steven Eppinger, Published 10/1999
Principles of CAD/CAM/CAE

Principles of CAD/CAM/CAE

by Kunwoo Lee, Published 01/1999
Mastering Revit MEP

Mastering Revit MEP

by Don Bokmiller, Brian Gemmell, Joel Londenberg, Published 07/2010
Machinery's Handbook, 28th Edition

Machinery's Handbook, 28th Edition

by Erik Oberg, Published 02/2008
Switchmode RF Power Amplifiers (Communications Engineering)

Switchmode RF Power Amplifiers (Communications Engineering)

by Andrei Grebennikov, Nathan O. Sokal, Marc J Franco, Published 07/2007
Mechanical Engineering Design

Mechanical Engineering Design

by Joseph Shigley, Charles Mischke, Richard Budynas, Joseph Shigley, Charles Mischke, Richard Budynas, Published 07/2003
The CNC Workshop (Version 2)

The CNC Workshop (Version 2)

by Frank Nanfara, Tony Uccello, Derek Murphy, Published 05/2002
The Mechanical Design Process

The Mechanical Design Process

by David Ullman, Published 07/2002
Optimization in Operations Research

Optimization in Operations Research

by Ronald L. Rardin, Published 08/1997
Circuit Design and Simulation with VHDL (MIT Press)

Circuit Design and Simulation with VHDL (MIT Press)

by Volnei A. Pedroni, Published 09/2010
Thermal Environmental Engineering (3rd Edition)

Thermal Environmental Engineering (3rd Edition)

by Thomas H. Kuehn, James W. Ramsey, James L. Threlkeld, Published 02/1998
ANSYS Workbench Tutorial with Multimedia CD Release 12

ANSYS Workbench Tutorial with Multimedia CD Release 12

by Jack Zecher, Fereydoon Dadkhah, Published 12/2009
Developing Products in Half the Time: New Rules, New Tools, 2nd Edition

Developing Products in Half the Time: New Rules, New Tools, 2nd Edition

by Preston G. Smith, Donald G. Reinertsen, Published 10/1997
Building Codes Illustrated: A Guide to Understanding the 2006 International Building Code

Building Codes Illustrated: A Guide to Understanding the 2006 International Building Code

by Francis D. K. Ching, Steven R. Winkel, Published 11/2006
MathCad: A Tool for Engineering Problem Solving (B.E.S.T. Series)

MathCad: A Tool for Engineering Problem Solving (B.E.S.T. Series)

by Philip J. Pritchard, Published 07/2007
Computational Geometry: Algorithms and Applications

Computational Geometry: Algorithms and Applications

by Mark de Berg, Otfried Cheong, Marc van Kreveld, Mark Overmars, Published 04/2008
Introduction To Industrial And Systems Engineering (3rd Edition)

Introduction To Industrial And Systems Engineering (3rd Edition)

by Wayne C. Turner, Joe H. Mize, Kenneth E. Case, John W. Nazemtz, Published 08/1992
The Nature and Aesthetics of Design

The Nature and Aesthetics of Design

by David Pye, Published 01/2000
Making Mechanical Cards: 25 Paper-Engineered Designs

Making Mechanical Cards: 25 Paper-Engineered Designs

by Sheila Sturrock, Published 10/2009
Machine Elements in Mechanical Design (3rd Edition)

Machine Elements in Mechanical Design (3rd Edition)

by Robert Mott, Robert L. Mott, Published 01/1999
System Dynamics (3rd Edition)

System Dynamics (3rd Edition)

by Katsuhiko Ogata, Published 11/1997

« Prev | 1 2 3 4 5 6 | Next »


Featured Video
Jobs
MECHANICAL ENGINEER for Peter R. Thom and Associates at ORINDA, CA
Sr. Mechanical Engineer for Kateeva at Newark, CA
Senior Design Engineer for Kaman at Gilbert, AZ
Mgr Mechanical Engineering 2 for Northrop Grumman at Melbourne, FL
Upcoming Events
Solidworks World 2017 at Los Angeles CA - Feb 5 - 8, 2017
Design & Manufacturing at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise