Events - April 2011

Search:
Submit Events

NX Test Drive and Introductory Training
Date: March 25 - April 15, 2011
Place: USA

Register for an NX software trial along with complimentary training.  This live online training series will be held each Friday from March 25 to April 15.  Register once for access to attend every training session and view all of the replays.  The online training session dates and topics are:

  • March 25:  Introduction to NX interface and design fundamentals
  • April 1:  Synchronous Modeling
  • April 8:  Large Assemblies & Multi-CAD
  • April 15:  Design Automation

Event Times: 2:00 pm Eastern

Duration: 90 minutes

FREE Computer-Aided-Design Webinars:ASCON
Date: April 4, 2011
Place: USA

New Document

ASCON Group, developer and integrator of professional CAD solutions, is glad to present a new on-line training session based on its powerful, easy-learning and cost-effective solution - KOMPAS-3D V12. All the interested are welcomed to join the webinars to benefit from CAD familiarization, as well as to get support and advice in any questions regarding all the main features of the 3D and 2D modelling softwares, collaboration abilities, surfac


Surface modelling: Advanced surface and complex shape features and functilonality overview. 13.04.2011

New Document

To register for webinars or get additional information about KOMPAS solutions, please, contact us at contact@ascon.net.

The number of participants is limited, do not miss an opportunity and register first!

Prepare for webinars and download KOMPAS-3D V12 30-Days full-functional Trial at ascon.net/download/kompas/.

Look forward to see you on-line!

e modelling, different add-ons for KOMPAS-3D and many others absolutely for free.


HANNOVER MESSE 2011
Date: April 4 - 8, 2011
Place: Hannover, Germany

13 leading international trade shows at one venue
Technology is shaping tomorrow's world. Today. A driving force behind future technological developments, HANNOVER MESSE sends out decisive signals and offers extensive scope for showcasing your products and services all along the industrial value chain.

MICROMANUFACTURING CONFERENCE & EXHIBITS
Date: April 5 - 6, 2011
Place: Oakbrook Terrace
IL USA

Whether the challenge is creating micro features on micro parts or on macro parts, participants in this event will be looking for ideas to improve their process. Exploring the many processes available, this conference brings together industry professionals to discuss the latest developments and to improve your process today. For 2011, the event provides expanded exhibits and exhibit hours providing even more opportunity to find solutions!

AERODEF 2011 EXPOSITION & CONFERENCE
Date: April 5 - 7, 2011
Place: Anaheim Convention Center
Anaheim, CA USA

AeroDef Manufacturing Exhibition and Conference provides a unique opportunity for aerospace manufacturers to meet with manufacturing technology and process providers featuring innovative solutions to their industry challenges.

NANOMANUFACTURING CONFERENCE & EXHIBITS
Date: April 5 - 6, 2011
Place: Drury Lane Convention Center
Oakbrook Terrace, IL USA

Looking to understand what nanotechnology means for you? Need to understand how and why nanotechnology can improve your products, process and may even cut costs? Interested in learning about the latest applications and trends in top-down fabrication and bottom-up assembly techniques? Then this event is for you!

Design & Manufacturing New England
Date: April 6 - 7, 2011
Place: Boston Convention & Exhibition Center
Boston, MA USA
Explore first-hand the latest developments in computer-aided design and manufacturing, rapid prototyping, engineering, components, production and automation machinery, lasers, motors and drives, packaging, materials handling, electronics, quality systems, networking, enterprise IT, a full range of contract services...and much more.
The Automotive Industry: Making Better Product Development Decisions
Date: April 7, 2011
Place: USA

This webcast presents the latest research on the challenges facing the makers of tomorrow’s cars, reviews how vehicles are evolving, and explores ways automotive engineers can improve their product development decision-making in this increasing level of complexity. The magnitude of these and related factors are challenging the automotive industry in unprecedented ways, highlighting the need for creativity, innovation, and collaboration.

Time: 8:30 a.m. PDT/ 11:30 a.m. EDT/ 3:30 p.m. GMT

2011 Design/Simulation Council Workshop
Date: April 7, 2011
Place: Cincinnati, OH USA

Join CPDA and members of the Design/Simulation Council on Thursday, April 7 in Cincinnati for a one-day workshop that will explore in-depth the latest thinking on the critical issues facing design and simulation.

COMPOSITES MANUFACTURING 2011
Date: April 12 - 14, 2011
Place: Dayton Convention Center
Dayton, OH USA

The Composites Manufacturing 2010 conference is designed to provide cutting-edge knowledge on composite applications, processes and best practices. This three-day program connects manufacturing engineers and management from the world's dominating industries aerospace, medical (surgical devices), wind energy, marine and consumer (recreational) products. The technical conference is complemented with exhibits, facility tours, tutorials and networking functions.

Fundamentals of Weld Fatigue Seminar
Date: April 14, 2011
Place: LMS Office LMS North America
Milwaukee, WI USA

LMS cordially invites you to join us for an informative and educational day on the fundamentals of weld fatigue analysis covering both seam & spot welds.

Simulia Webinar: Managing Costs and Accelerating Product Development with Cluster Computing and Realistic Simulation
Date: April 14, 2011
Place: USA

Industry trends toward developing more complex products and creating higher-fidelity models to simulate real-world behavior have resulted in longer run times for many simulation users. At the same time, the advent of multicore chips and inexpensive computing clusters has made parallel computing far more affordable than in the past.

During this webinar, learn how Mercury Marine, the world leader in marine propulsion technology, is using Abaqus finite element analysis (FEA) software on a Windows server-based cluster to enhance design quality, reduce overall costs, and improve productivity.

Mercury Marine’s new server-based cluster resulted in improved software utilization, which nearly offset incremental hardware costs, faster run times of the largest jobs (up to 7x), and improved IT support by in-house system administrators.

"We’re able to achieve more realism in our simulations and more refinement in our designs. As a result, we’re achieving increased durability, reliability, and weight optimization in our products."
- Arden Anderson, CAE Engineer, Mercury Marine

By attending this webinar, you will learn:

  • How parallel computing can save time and reduce simulation costs
  • What to consider when deploying a cluster solution
  • How Mercury Marine successfully implemented a cluster solution resulting in cost savings and improved designs


Moderator: John G. Falcioni, Editor-in-Chief, Mechanical Engineering
John G. Falcioni is Editor-in-Chief and Publisher of Mechanical Engineering magazine, the flagship publication of the American Society of Mechanical Engineers. He also oversees the electronic newspaper, ASME News, ME Magazine Online, and all general-interest supplements. Mr. Falcioni holds a master's degree from Columbia University's Graduate School of Journalism.

Speakers:

Matt Dunbar, Chief Architect, SIMULIA
Matt Dunbar joined SIMULIA in 1993 and has held a variety of positions in the company since that time. For much of his tenure he has focused on developing parallel capabilities in the Abaqus simulation products to deliver the application performance required for complex simulation. He has also taken responsibility for the computer environment used by SIMULIA to develop and support the Abaqus products. Mr. Dunbar holds B.S. and M.S. degrees in Aeronautics and Astronautics from Stanford University.

Arden Anderson, CAE Engineer, Mercury Marine
Arden Anderson came to Mercury in 2005 to develop crashworthiness simulation capabilities for marine engine systems using Abaqus Explicit. He is currently responsible for crashworthiness, outboard structural analysis, boat performance prediction, and advising on computing methods, hardware, and software. Prior to joining Mercury, he worked for three years at Lawrence Livermore National Laboratory simulating high rate dynamically loaded structures using DYNA and ALE3D. Mr. Anderson graduated from the University of Wisconsin – Madison with an MS and BS in Engineering Mechanics.

Paul Radavich, Design Analysis Manager, Mercury Marine
Paul Radavich graduated from The Ohio State University in 2000 with a Ph. D in Mechanical Engineering studying flow generated whistling phenomena using Computational Fluid Dynamics. After graduation, he worked for Ford Motor Company as an analyst simulating engine performance and sound quality until 2004 when he joined Mercury Marine.

HOUSTEX 2011
Date: April 18 - 20, 2011
Place: George R Brown Convention Center
Houston, TX USA

For over three decades, HOUSTEX has brought together manufacturing equipment buyers and industry-leading sellers to interact and discuss production issues. These face-to-face interactions deliver pure energy! Manufacturers see the latest technology in action, gather fresh ideas, develop production strategies, and build long-lasting relationships with suppliers.

PMTS 2011
Date: April 19 - 21, 2011
Place: Greater Columbus Convention Center
Columbus, OH USA

The Precision Machining Technology Show was a bright spot in a sluggish economy.  North America's only production machining focused show returned to the Greater Columbus Convention Center in Columbus, Ohio, April 28-30, 2009. Despite a dismal economic background, PMTS proved to be a success with plenty of machines on display and quality attendees there to check them out.

INTERMOLD 2011/Die and Mold Asia 2011
Date: April 20 - 23, 2011
Place: TOKYO BIG SIGHT
TOKYO, Japan

Metal Machine Tools, Machining Tools, Metal Forming Machines, Grinding Machines, Molding Machines of all kinds and related equipment, Mold Bases, Die & Mold Materials, Die & Mold Working Systems, High Speed Steels, Cemented Carbide Tools & Diamond Tools, Grinding Wheel & Abrasive, Precision Measuring, Optical Measuring, 3D Measuring, CAD/CAM/CAE Systems, Rapid Prototyping, Ultra High Precision Manufacturing Technology, Design and Modeling Service Bureau, FA Related Apparatuses, Literature Related to Die & Mold Manufacturing

NX for CATIA Organizations
Date: April 21, 2011
Place: USA

With the recent activity in today’s PLM business, more companies are migrating from Dassault CATIA V5 to Siemens NX CAD.  The most notable market that is making this transition is the automotive industry. Working with both CAD systems or switching to NX is necessary to keep production flowing smoothly.  Migrating to NX from CATIA isn’t a difficult or complicated process.  This webcast will highlight the similarities and the differences between NX and CATIA to help make the transition smoother for automotive manufacturing CATIA users.

Time:  10:00 AM - 11:00 AM Pacific

Methods of Predicting Motion: NX Motion Simulation
Date: April 26, 2011
Place: USA

Learn how to predict and understand the functional behavior of parts and assemblies by integrating knowledge-driven simulation in the design session. Predict complex motion behavior of assemblies and products to meet functional performance objectives.

Time: 10:00 AM - 10:30 AM PDT


ACE 2011 International
Date: April 26 - 28, 2011
Place: The Henry Hotel
Dearborn, MI USA

Whether you're an Aras Customer or Not. A PLM Beginner or Expert. A Business or Technical person. ACE 2011 is for You!

SolidWorks webinar to focus on Delcam’s integrated CAM
Date: April 27, 2011
Place: USA

SolidWorks® will focus on Delcam’s Gold Partner CAM system, Delcam for SolidWorks, in a webinar on April 27th.  During the webinar, SolidWorks will show how Delcam’s world-class CAM solution, which is fully integrated into SolidWorks, can help reduce product manufacturing costs, shorten lead times, increase throughput and yield.  

To register for the webinar, please go to www.solidworks.com/manwebcastdelcam.

FREE Computer-Aided-Design Webinars:ASCON
Date: April 27, 2011
Place: USA

ASCON Group, developer and integrator of professional CAD solutions, is glad to present a new on-line training session based on its powerful, easy-learning and cost-effective solution - KOMPAS-3D V12. All the interested are welcomed to join the webinars to benefit from CAD familiarization, as well as to get support and advice in any questions regarding all the main features of the 3D and 2D modelling softwares, collaboration abilities, surfac

Assembly creation: Assembly modelling and main functionality. BOM lists.27.04.2011


New Document

To register for webinars or get additional information about KOMPAS solutions, please, contact us at contact@ascon.net.

The number of participants is limited, do not miss an opportunity and register first!

Prepare for webinars and download KOMPAS-3D V12 30-Days full-functional Trial at ascon.net/download/kompas/.

Look forward to see you on-line!

e modelling, different add-ons for KOMPAS-3D and many others absolutely for free.


Electrical & Mechanical Design Tools for Rockwell Automation Systems
Date: April 28, 2011
Place: USA

Rockwell Automation, Gerrie Electric and Javelin Technologies are co hosting this special event to discuss the tools available to help electrical and mechanical designers work efficiently to design a Rockwell Automation System.  

Time: 10:00am to 11:00am EDT

Free Webinar: Retrofitting of Turbomachinery - from Scanned Data to a New Efficient Flow Path
Date: April 28, 2011
Place: USA

The SoftInWay team will present the full redesign process to the attendees: starting from analyzing scanned data and determining profile characteristics, followed with 1D/2D analysis of existing flow path, evaluation and selection of sections which require redesign and finally the design of new and efficient airfoils.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise