Events - Next 30 Days

Search:
Submit Events

3D Printer Roadshow - Woodland Hills, CA
Date: September 11, 2015
Place: 6400 Canoga Ave. #121
Woodland Hills, UT 91367 USA

GoEngineer & Stratasys 3D Printer Roadshow  September 11th– Woodland Hills 11am-12pm

 

During this complimentary 3D printing lunch event, you will see clever and creative examples of how 3D printing is being integrated into the product development and manufacturing process to drive efficiency, versatility, and enhance capability. 

Also, learn how new 3D printing materials are driving traditional and non-traditional 3D printing applications, and how to choose the best material for your application. 

Join us at this event to see how 3D printing can be fully utilized in a real world application, and experience a live interactive presentation on a Quad-Copter/Drone/UAV where 3D printing was used in all aspects of design, tooling, and manufacturing to optimize the product and the process. 

 

Event Information: 

Date - Friday, September 11th 

Time - 11:00-Noon, followed by lunch 

Location - Woodland Hills, CA- GoEngineer Training Room & Printer Lab

WESTEC 2015
Date: September 15 - 17, 2015
Place: Los Angeles Convention Center
Los Angeles, CA USA

Carpet, one 6’ draped table, two standard side chairs, one wastebasket and one standard booth ID sign Unlimited Material Handling and one-time equipment spotting. Complimentary one-time use of pre- registered attendee mailing list.


3D Printer Roadshow - Steelhead Brewery: Eugene, OR
Date: September 17, 2015
Place: 199 E. 5th Ave.
Eugene, OR 97401 USA

GoEngineer & Stratasys 3D Printer Road Show September 17– Eugene, OR – 5:00pm-7:00pm

 

During this complimentary 3D printing event, you will see clever and 

creative examples of how 3D printing is being integrated into the product 

development and manufacturing process to drive efficiency, versatility, and 

enhance capability.

 

Also, learn how new 3D printing materials are driving traditional and

non-traditional 3D printing applications, and how to choose the best 

material for your application.

 

Join us at this event to see how 3D printing can be fully utilized in a

real world application, and experience a live interactive presentation on a

Quad-Copter/Drone/UAV where 3D printing was used in all aspects of design,

tooling, and manufacturing to optimize the product and the process.

 

Complimentary light appetizers and drinks will be served at Steelhead Brewery

3D Print A Part Friday - Salt Lake City - GoEngineer
Date: September 18, 2015
Place: GoEngineer - Salt Lake City
1787 E. Fort Union Blvd. Suite #100, Salt Lake City, UT 84121 USA

GoEngineer & Stratasys 3D Printer Print-a-Part Day
 September 18th – Salt Lake City – 10am-1pm

This event is the perfect opportunity to participate in the entire product design process from designing a part to taking it out of the 3D printer.

Learn from the experts how 3D printers can integrate into an engineer’s everyday workflow.

What to expect?

  • Get SOLIDWORKS tips & trick and discuss DFP (Design for Print) rules.
  • Design a part.
  • Discussion on the Catalyst software that runs the printers.
  • Tour the  3D printer lab and see Objet, Fortus Connex and uPrint technologies.
  • Lunch, plus open question/answer session.
3D Print A Part Friday - Santa Ana - GoEngineer
Date: September 18, 2015
Place: GoEngineer Santa Ana
1231 E. Dyer Road, Suite 150, Santa Ana, CA 92705 USA

GoEngineer & Stratasys 3D Printer Print-a-Part Day
 September 18 - Santa Ana -10am-1pm

This event is the perfect opportunity to participate in the entire product design process from designing a part to taking it out of the 3D printer.

Learn from the experts how 3D printers can integrate into an engineer’s everyday workflow.

What to expect?

  • Get SOLIDWORKS tips & trick and discuss DFP (Design for Print) rules.
  • Design a part.
  • Discussion on the Catalyst software that runs the printers.
  • Tour the  3D printer lab and see Objet, Fortus Connex and uPrint technologies.
  • Lunch, plus open question/answer session.
28th Annual CMII/IPE Symposium and Training
Date: September 21 - 22, 2015
Place: Doubletree by Hilton Denver
3203 Quebec Street, Denver, CO USA

Enterprise-Wide CM & Integrated Process Excellence CMII/IPE Implementation Issues, Solutions and Results

11th International Modelica Conference 2015
Date: September 21 - 23, 2015
Place: Palais des Congrès de Versailles
Versailles, France

A conference about Model Based Systems Engineering with focus on the Modelica (www.Modelica.org) equation based modeling language, Modelica model libraries, Modelica based simulation tools, the FMI (Functional Mockup Interface) (www.fmi-standard.org) model exchange format as well as industrial use cases.

Paper submission until May 11.

2016 SOLIDWORKS Premiere Events
Date: October 1 - 29, 2015
Place: Various, WI USA

Attend a SOLIDWORKS 2016 Premiere event hosted by Graphics Systems Corp. to see how the new tools and enhancements will help you get your work done faster and easier than ever before! Don't miss these valuable, complimentary events at unique locations where you can:

  • Experience Live Presentations of the New Features in the 
    SOLIDWORKS 2016 Suite
  • Learn "How It's Made" from Local Best-in-Class Companies with Live Presentations and Facility Tours
  • See the Latest Tips & Tricks and Get a First Look at Industrial Design, the Newest Design and Collaboration Software from SOLIDWORKS
  • Talk One-on-One with SOLIDWORKS Engineers, Experts & Partners
  • Win Prizes and Network with Your Peers!

Oct. 1 - Waterloo, WI - Trek Bicycle

Oct. 6 - Milwaukee, WI - Wisconsin Manufacturing & Technology Show

Oct. 13 - Franklin Park, IL - Bretford Manufacturing

Oct. 15 - Green Bay, WI - Lambeau Field

Oct. 27 - Middleton, WI - Electronic Theatre Controls

Oct. 29 - Rockford, IL - Clinkenbeard

Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
3D Printing Comes To Big Box Stores
Jobs
SALES ENGINEER for Missler Software inc at Addison, IL
Optical Tasking Engineer for Airbus Defense and Space Geo-Intelligence at Chantilly, VA
Upcoming Events
3D Printer Roadshow - Woodland Hills, CA at 6400 Canoga Ave. #121 Woodland Hills UT - Sep 11, 2015
WESTEC 2015 at Los Angeles Convention Center Los Angeles CA - Sep 15 - 17, 2015
3D Printer Roadshow - Steelhead Brewery: Eugene, OR at 199 E. 5th Ave. Eugene OR - Sep 17, 2015
3D Print A Part Friday - Salt Lake City - GoEngineer at GoEngineer - Salt Lake City 1787 E. Fort Union Blvd. Suite #100 Salt Lake City UT - Sep 18, 2015



Internet Business Systems © 2015 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise