Events - May 2013

Search:
Submit Events

Re-Engineer Your Processess - Use MBE - Bootcamp Seminar
Date: May 1 - 8, 2013
Place: MCAD Corporate Office & Training Center
7450 West Alaska Drive, Lakewood, CO 80226 USA

Arming the decision makers with CAD model based benefits and action plans.

A One Hour Seminar on:

  • The Philiosopy of Designing products using CAD Model-Based Life-cycles
  • Understanding the importance of Model-Based Commercial (ASME Y14.41), Government (MIL-STD-31000A) and Company Standards
  • Learning MBE Benefits, Risks and Action Plans

MBE Boot Camp is the first of a series of Model-Based Training, brought to you byAction Engineering.

Experience 3D! SolidWorks Workshop
Date: May 1, 2013
Place: Location TBD
South Bend, IN USA

Experience 3D! Workshop is a free program that allows you to come out and experience SolidWorks 3D CAD Software. This hands-on, instructor-led event will allow you to gain valuable knowledge. We will discuss:

  • An overview of the SolidWorks family of solutions.
  • The power of 2D sketching and 3D modeling
  • Associative assembly modeling and drawing creation
  • Design communication with eDrawings, DraftSight & PhotoView 360.
  • Much More! 

Our technical team is ready to get you up-to-speed on the product design and manufacturing tools you need to excel in today’s marketplace.  This is not a sales seminar, but it will introduce you to best-in-class tools for design, simulation, product data management and technical documentation creation.

Webinar Wednesday: eLearning - SolidWorks - Large Assembly 103
Date: May 1, 2013
Place: USA

In the final eLearning session on Large Assembly with SolidWorks, we’ll take a look at understanding Referenced Documents and External References, and how they affect large assemblies. We’ll also do a quick review on how to manage when rebuilds happen. We’ll cover strategies for part modeling to reduce rebuild time and memory footprint, as well as large assembly strategies for Configuration and Display States.

Webinar: 3DSync - Give Your 3DCAD A Turbo Boost!
Date: May 1, 2013
Place: USA

If you are an engineer or designer, chances are you have imported 3D data that needs to be integrated into your design. Since most 3D CAD software packages don’t provide tools to edit foreign data, you are probably wasting valuable time re-creating parts or assemblies.

Now there’s a solution: 3DSync.

Get the Power to Edit any 3D CAD File

3DSync, which utilizes Siemens PLM Software’s synchronous technology, is 3D editing software that allows you to edit mechanical parts and assemblies from virtually any CAD system. In fact, you can directly manipulate geometry by adding 3D driving dimensions. 3DSync’s Live Rules finds and preserves design intent, and Live Sections lets you edit inserted 2D cross sections. Data translators allow you to read and write IGES, STEP, Parasolid, JT and many other 3D formats.

Learn and see first hand in this 30 minute webinar presented by CAM Logic

Register for a session now by clicking a date below:

Wed, May 1, 2013 2:00 PM - 3:00 PM EDT

Register Here>>

Once registered you will receive an email confirming your registration
with information you need to join the Webinar.

System Requirements
PC-based attendees
Required: Windows® 7, Vista, XP or 2003 Server

Mac®-based attendees
Required: Mac OS® X 10.6 or newer

Mobile attendees
Required: iPhone®, iPad®, Android™ phone or Android tablet

CIMdata’s 2013 Systems Engineering Workshop
Date: May 1, 2013
Place: GE Aviation Brian H. Rowe Learning Center, Cincinnati, OH USA

CIMdata, Inc., announces that on May 1st, 2013, CIMdata’s Systems Engineering Knowledge Council will host its inaugural workshop. The workshop will show how a competitive advantage may be created through the deployment of systems engineering as a strategy for product development. Real-world examples will be provided by council participants and leading-edge users. The workshop will be facilitated by CIMdata’s practice manager for Systems Engineering, John MacKrell. Find out first-hand what others have been doing to implement Systems Engineering for product design, learn how the relationship tree among systems, subsystems, and components is managed and linked to the PDM product structure, and much more. This is the foremost opportunity to network with members of CIMdata’s Systems Engineering Knowledge Council and like-minded peers.

Webinar Wednesday: eDemo - SolidWorks Enterprise PDM - Data Management Made Easy
Date: May 1, 2013
Place: USA

Operating without a Product Data Management system means a struggle with any number of data management issues that can impede your productivity and success. With a strong SQL database backbone and a secure vaulting system, SolidWorks Enterprise PDM is the solution to file sharing, revision control, reporting, work flow and much more.

Accelerate Your Product Design for Faster Time to Market-May 1, 2 PM EST
Date: May 1, 2013
Place: USA

Take Your CAD Design to the EDGE

Webinar-Wednesday May 1, 2PM EST


Did you know that 39% of designers struggle with model creation?  The good news is that you don’t have to.  


Here’s what is included in the webinar:

• Accelerate design for faster time to market.  How? Eliminate lengthy pre-planning with a history-free design environment.



•Make faster revisions to designs for higher repeat business. How? Make flexible changes in minutes vs. hours in a constraint-free environment.



• Achieve better design reuse to reduce development costs
and offer more competitive pricing. How? Instantly import and edit CAD models from any CAD system


Learn and see firsthand in this 30 minute webinar presented by CAM Logic. Solid Edge. Design Better.

 

Reserve your Webinar seat now at:

https://www3.gotomeeting.com/register/706087974

Integrated Design Engineering & Manufacturing Training Event
Date: May 2, 2013
Place: Dassault Systèmes - 3rd floor, Trillium East Tower
6320 Canoga Ave, Woodland Hills, CA 91367 USA

GoEngineer is hosting free 1/2 day training events using a dual presentation format, with a team of experts sharing real design challenges and solving them by leveraging the right tool at the right time. These are unique events where GoEngineer’s team of experts have prepared practical challenges and solutions.  Leverage the team and tools you already have to the fullest potential, let GoEngineer’s team of experts provide the connectivity you’re missing with SolidWorks Solutions.

Learn more:  http://www.goengineer.com/site/pages/solidworks_training_event.htm#

Webinar: Edgecam Workflow
Date: May 3, 2013
Place: Bayshill Road
Cheltenham, Leicestershire, GL50 3AW United Kingdom

Webinar looking at Edegecam''s revolutionary new method of rapid manufacturing, called "Workflow," to be released in the forthcoming Edgecam 2013 R2. A part automatically loads in the correct manufacturing environment with datum set. Using the new ribbon toolbars, interactive part set up, stock, vice and machine selection features, you will be ready to apply your toolpath within seconds. Two webinars are available on May 3rd.

Unleash The Power of 3D Engineering!
Date: May 3, 2013
Place: Automation Alley Atrium
2675 Bellingham, Troy, MI 48085 USA

This free event is designed to help you understand the power and  potential of the latest 3D engineering technologies available to engineers including laser scanning, 3D printing as well as the latest advancements in 3D CAD design- most notably Synchronous Technology.

Simulation Month - Discover and Resolve Vulnerabilities to Vibration with SolidWorks Simulation
Date: May 3, 2013
Place: USA

Vibration is something that all products are subjected to – whether it’s a simple as vibration during the transport of a product, to an inherent part of the component’s service life – vibration is a potential mode of failure that needs to be adequately tested. Join us to review the capabilities of the SolidWorks Simulation analysis suite to detect vibration issues, from modal analysis to determine resonant frequencies, to a complete dynamic analysis that will show you resultant vibrations and stresses under vibration loads. We’ll explore these concepts on a simple bicycle model, to show you exactly how problems can be detected and corrected.

MSC Software 2013 Users Conference
Date: May 7 - 8, 2013
Place: Hyatt Regency Irvine
17900 Jamboree Road, Irvine, CA 92614 USA

In February 2013, MSC Software will reach a major milestone: the company will celebrate half a century of driving engineering simulation innovation forward. With new products, new advancements in technology and a new surge of inspiration, MSC continues the tradition of helping engineers around the world to design, develop and analyze their products with certainty. MSC Software will celebrate this achievement during its international 50th Anniversary User Conferences.

Webinar: What's New in Autodesk Inventor 2014
Date: May 8, 2013
Place: USA

IMAGINiT experts share the latest features of Autodesk® Inventor & Autodesk® Product Design Suite live.

You will have the opportunity to ask questions of the presenters directly.

Join us on May 8 and find out more.

1:30 PM - 2:30 PM Eastern


REGISTER NOW

Webinar: Pointwise Meshing Forensics Webinar Gives Solutions for the Unexpected
Date: May 8, 2013
Place: USA

Pointwise will present “Meshing Forensics: How to Recover When Things Go Wrong,” a free webinar, at 10 a.m. (CDT) on 8 May. The course will show seasoned veterans and new users of Pointwise what to do when they encounter an unexpected situation while creating a mesh.

Using a series of application-based examples, techniques will be demonstrated showing how to generate high quality grids when things take a turn for the worse.

For more information or to register, go to www.pointwise.com/webinar.

The hour-long webinar will solve the following mysteries:

  • I’m unable to split my model.
  • I can’t find all the holes in my geometry.
  • That domain doesn’t look quite right.
  • That domain just turned green.
  • My unstructured block won’t initialize.

The webinar will be presented by Travis Carrigan, Pointwise senior engineer, and Carolyn Dear Woeber, manager of support and consulting.

Mr. Carrigan joined Pointwise as a senior engineer after completing his M.S. in aerospace engineering at the University of Texas at Arlington in May 2011. He interned at Pointwise beginning May 2008, producing demonstration and application videos and working in technical support, doing grid projects and quality assurance testing. He received his B.S. in aerospace engineering in 2009 from UTA.

Mrs. Woeber has more than 10 years’ experience in mesh generation for a range of application areas, with a specialty in unstructured viscous mesh generation. At Pointwise, she is manager of the Support and Consulting Team, overseeing customer support, quality assurance, training, consulting and documentation.  Before joining Pointwise, she was a member of the NSF Engineering Research Center’s Computational Simulation and Design Center at Mississippi State University, where she earned a B.S. and an M.S. in aerospace engineering in 2000 and 2004.

Pointwise, Inc. is solving the top problem facing engineering analysts today – mesh generation for computational fluid dynamics (CFD). The company’s Pointwise software generates structured, unstructured and hybrid meshes; interfaces with CFD solvers, such as ANSYS FLUENT, STAR-CCM+,  ANSYS CFX and OpenFOAM as well as many neutral formats, such as CGNS; runs on Windows (Intel and AMD), Linux (Intel and AMD), and Mac, and has a scripting language, Glyph, that can automate CFD meshing. Large manufacturing firms and research organizations worldwide rely on Pointwise as their complete CFD preprocessing solution

Webinar Wednesday: eLearning - SolidWorks Enterprise PDM - Introduction to the EPDM API
Date: May 8, 2013
Place: USA

Building automation into EPDM always improves your day-to-day process – and with the SolidWorks EPDM API, you can automate and customize SolidWorks Enterprise PDM so it fits your needs. Join us for a first look into the EPDM API, where we’ll review some common API calls and simple program structuring for EPDM add-ins.

Webinar Wednesday: eDemo - CAMWorks - Introduction to Parametric Machining
Date: May 8, 2013
Place: USA

What if you could take the simplicity of SolidWorks and apply it to the way you program and machine your parts? CAMWorks, the first SolidWorks Certified Gold Partner Product for CNC automation, is the revolutionary feature-based CAM tool that will automatically detect features in the geometry, associate operations and generate toolpaths in a matter of minutes rather than hours. Join us for an in-depth look at CAMWorks, and step into the world of intelligent machining through automation.

Integrated Design Engineering & Manufacturing Training Event
Date: May 8, 2013
Place: Haggin Oaks Golf Complex
3645 Fulton Avenue, Sacramento, CA 95821 USA

GoEngineer is hosting free 1/2 day training events using a dual presentation format, with a team of experts sharing real design challenges and solving them by leveraging the right tool at the right time. These are unique events where GoEngineer’s team of experts have prepared practical challenges and solutions.  Leverage the team and tools you already have to the fullest potential, let GoEngineer’s team of experts provide the connectivity you’re missing with SolidWorks Solutions.

Learn more:  http://www.goengineer.com/site/pages/solidworks_training_event.htm#

Webinar: FloTHERM XT: Step Change by Incorporating the EDA and MCAD Design Flows (Mentor Graphics 5/8/13)
Date: May 8, 2013
Place: USA

FloTHERM XT: Step Change by Incorporating the EDA and MCAD Design Flows

Date: 8th May 2013
Time: 10:30 AM US/Pacific
OR 11:30 AM Europe/London
Register Now

This presentation addresses challenges faced in incorporating EDA and MCAD design flows into electronics cooling analysis and where achieving this enhances productivity by usage of a more consistent data model from concept to verification.

FloTHERM XT is a new electronics cooling software designed to address these challenges. It has been developed to meet thermal simulation requirements based on constantly increasing electronic design and geometric complexity in novel enclosures and layouts.

Find more on shortening development with FloTHERM XT – register now.

Online demonstration includes rapid build and analysis of a model using the CAD Centric User Interface in FloTHERM XT.

REGISTER NOW

Unable to attend but want more information? Download this related white paper:
"Enhancing Electronics Cooling by incorporating EDA and MCAD Design Flows"




 


Webinar-Make Faster Revisions to Product Designs for Higher Repeat Business. May 8-11 AM EST
Date: May 8, 2013
Place: USA



TakeYour Design to the EDGE

Make faster revisions to product designs for higher repeat business.

Did you know that 57% of designers and engineers lack the ability to alter
existing designs?  The good news is that you don’t have
to.  Attend this webinar and learn.

Here’s what is included:

• Accelerate design for faster time to
market.  How?  Eliminate lengthy pre-planning with a
history-free design  environment.


•  Make faster revisions to designs for higher repeat business. How?
Make flexible changes in minutes vs. hours in a constraint-free environment.


•Achieve better design reuse to reduce development costs and offer more
competitive pricing. How? Instantly import and edit CAD models from any CAD
system 


Learn and see firsthand in this 40 minute webinar presented by CAM Logic.

Solid Edge. Design Better.

Reserve your Webinar seat now at:

https://www3.gotomeeting.com/register/409567798

Saratech Webinar: On-Demand Engineering and Consulting Services
Date: May 9, 2013
Place: CA USA

Title: On-Demand Engineering and Consulting Services

Time: 10:00-10:30 am PST

      Saratech provides engineering services to customers in various industries including Aerospace and Defense, Automotive, Heavy Equipment and Oil and Gas. Whether you need temporary skilled resources, expert assistance or mentoring, Saratech services can be a force multiplier for your existing engineering capabilities or complement your organization with skills that you can utilize intermittently. Saratech engineering and consulting services help you complete your engineering projects on budget, on schedule and get the job done right.

Registration Required: https://www1.gotomeeting.com/register/759966577

Simulation Month - Designing Your Products to Withstand Shock, Impact and Drop Conditions
Date: May 10, 2013
Place: USA

Shock, Impact and Drop conditions are often the hardest things to design for – the loads are unpredictable, involve dynamic and potentially nonlinear effects, and are often the most extreme load a product sees during its design life. Join us as we review the different shock and impact analysis types available to us throughout the SolidWorks Simulation analysis suite, and review how you can identify and correct potential failure modes with your products, while minimizing expensive physical prototypes and destructive testing.

Integrated Design, Engineering and Manufacturing Training Event -Ventura, CA
Date: May 10 - 14, 2013
Place: The Derby Club at Ventura County Fairgrounds
10 West Harbor Blvd., Ventura, CA 93001 USA

GoEngineer is hosting free 1/2 day training events using a dual presentation format, with a team of experts sharing real design challenges and solving them by leveraging the right tool at the right time. These are unique events where GoEngineer’s team of experts have prepared practical challenges and solutions.  Leverage the team and tools you already have to the fullest potential, let GoEngineer’s team of experts provide the connectivity you’re missing with SolidWorks Solutions.

Learn more:  http://www.goengineer.com/site/pages/solidworks_training_event.htm#

CIMdata PLM Certificate Program for Industrial Organizations & Systems Integrators
Date: May 13 - 17, 2013
Place: Ann Arbor, MI USA

CIMdata PLM Leadership is comprised of a set of well defined, assessment–based PLM education and training certificate programs. These programs are delivered through a series of education and training sessions, and are intended to ensure that those involved in a PLM implementation project all have a strong understanding of PLM concepts and industry leading best–practices.

Webinar: Automated Mold Design with Mold Wizard
Date: May 14, 2013
Place: USA

NX Mold Wizard applies Process Wizard technology to optimize the mold design process, delivering levels of productivity that dramatically outperform traditional CAD software. Providing a structured workflow based on expert best practices, automation of mold-specific design tasks and libraries of standard mold components, NX Mold Wizard provides a step-by-step process that promotes the most efficient workflow, while integrating complex elements of design technology into automated sequences. 


Integrated Design Engineering & Manufacturing Training Event
Date: May 14, 2013
Place: Dave & Busters
1940 Bernardo Plaza Dr., San Diego, CA 92128 USA

GoEngineer is hosting free 1/2 day training events using a dual presentation format, with a team of experts sharing real design challenges and solving them by leveraging the right tool at the right time. These are unique events where GoEngineer’s team of experts have prepared practical challenges and solutions.  Leverage the team and tools you already have to the fullest potential, let GoEngineer’s team of experts provide the connectivity you’re missing with SolidWorks Solutions.

Learn more:  http://www.goengineer.com/site/pages/solidworks_training_event.htm#

Unleash Optimal Plastic Designs in 60 Minutes
Date: May 14, 2013
Place: USA

During the 60-minute session, you will benefit from the demonstration of Moldex3D’s ground-breaking product: eDesign suite, which offers an easy-to-use yet powerful simulation tool to visualize flow and thermal properties to achieve design validation. Designers can even further output the analysis result to structural software to optimize part structure more quickly and efficiently. Register today to learn how Moldex3D can help you build better plastics parts!

PLANT MANAGEMENT & DESIGN ENGINEERING SHOW
Date: May 14, 2013
Place: Place Bonaventure
Montreal, Quebec, Canada

PMDS is the leading event for manufacturing professionals from throughout Quebec to find the products, services and information they need to stay competitive.

Held every two years, this hands-on experience connects top industry suppliers with qualified buyers seeking solutions for plant and facility maintenance and equipment and systems design.

Much more than a tradeshow, PMDS also provides many opportunities for networking and industry education.

EASTEC 2013 Exposition
Date: May 14 - 16, 2013
Place: Eastern States Exposition
W Springfield, MA USA

Are these your company's priorities: confronting competition, developing innovative products, keeping up with new technology, or serving emerging markets? This is why EASTEC 2013 belongs in your company's business plan. EASTEC has your manufacturing in mind -- whether you're a machine tool builder, distributor, or small-to-medium size enterprise. Whether you're planning to add industries to your customer roster, or just seeking ways to keep your current clients satisfied, EASTEC can keep your operation competitive.

TWS International Users Conference 2013
Date: May 15 - 16, 2013
Place: Pittsburg, USA

The Third Wave International Users Conference is an opportunity for Third Wave Systems customers to gather in a collaborative forum to:

  • Share experiences and process applications
  • Present current research topics and results
  • Network during an evening reception
  • Gain knowledge of software capabilities and improvements
  • Participate in an industry tour
Webinar Wednesday: eDemo - SolidWorks Simulation - Stress Analysis – and More – With Simulation
Date: May 15, 2013
Place: USA

SolidWorks Simulation Professional offers powerful, yet easy to use, stress analysis tools that allow you to predict the strength and stiffness of your designs.  However, you’re able to do so much more, by optimizing your design to meet the performance requirements as efficiently as possible, by predicting the fatigue life of the product to understand it’s durability and by using powerful submodeling tools to perform in-depth analysis on key areas of the model. Join us to see detailed walkthroughs of the analysis process, and how a stress analysis can be leveraged to give detailed insight into the performance of a product, and to design against many potential modes of failure.

Webinar Wednesday: eLearning - SolidWorks Simulation - Contact and Connectors in Stress Analysis
Date: May 15, 2013
Place: USA

The Contact and Connectors in Stress Analysis eLearning session will show how users can quickly define the interactions between their parts for stress analysis in SolidWorks Simulation. Learn tips for defining the bolts, welds, and springs in your assemblies to achieve quicker solve times and clear pass/fail results. After an overview of contact types in SolidWorks Simulation and where to use them, we’ll show you how to reduce solve time and simplify results viewing.

Voxdale: Virtual Prototyping for the Process and Manufacturing Industries
Date: May 15, 2013
Place: USA

In this special 20-minute web presentation, Voxdale, a design and engineering agency, based in Antwerp, talk about how their design process uses Computational Fluid Dynamics (CFD) to augment industrial projects.  Koen shows that by using virtual prototyping and simulation early on in their design process, they can create more innovative and radical design solutions.

SolidWorks Composer 101: The basics - Webinar
Date: May 15, 2013
Place: USA

Presenter: Daniel Lubbe, Applications Engineer

Join us to learn some of
the basics of using SolidWorks Composer.  Curriculum includes:

*Import your models from SolidWorks and create views
*Link views in a word document and show a design change
*Update your model, that, in turn, updates your Word document

SolidWorks Solutions Day - Design to Manufacture
Date: May 15, 2013
Place: Tacoma, WA 98402 USA

An integrated design and manufacturing process leads to an overall increase in efficiency. Join us for SolidWorks Solutions Day in Tacoma on May 15 to see how you can use SolidWorks applications to design, validate, communicate, document, and allow direct access to design data for a streamlined collaboration between design and manufacturing. Featured solutions include SolidWorks 3D CAD, SolidWorks Simulation, SolidWorks Electrical, SolidWorks Enterprise PDM, SolidWorks Composer, and CAMWorks. SolidWorks Solutions are quick to deploy, easy to use, simple to administer, and help you get your products to market faster. Register now.

Webinar: Next Generation Simulation Tools (IMAGINiT/Autodesk)
Date: May 15, 2013
Place: USA

Attend this complimentary 1hour webcast, and learn how Autodesk® Simulation 360 provides a new generation of cloud integrated simulation tools that deliver unrivaled computing power. Proven fast, accurate and flexible technology offers engineering teams a better way to predict, optimize, and validate designs early in the development process.


Webcast

 REGISTER NOW!

Wednesday, May 15
11:00 AM Eastern Time
2:00 PM Eastern Time

 



Why ARAS is the Best PLM Value
Date: May 16, 2013
Place: USA

Aras Product Lifecycle Management (PLM) software is an enterprise-level solution for discrete manufacturers that enables extraordinary efficiency in product development processes. With Aras you can dramatically speed up design-to-release processes, improve quality and cut overall development costs. In this webinar you will see and learn:

  • The Aras PLM Value Framework and technology differentiators
  • How to acquire ARAS Open Source and start using ARAS immediately
  • How ARAS subscription packaging eliminates the need for upfront license costs and includes upgrades and upgrade services
  • Why ARAS supports easy deployment, expansion and system maintenance
  • How ARAS provides Item Based Engineering BOM and Process Oriented solutions for Engineering Change, Program and Project Management, Quality, Compliance and more
  • Hear actual case studies of the companies using ARAS
Seminar: Maximising the Potential of Renewable Energy through Numerical Simulation (NAFEMS)
Date: May 21, 2013
Place: Aberdeen, United Kingdom

NAFEMS, the international association for the engineering analysis, modelling and simulation community, is pleased to announce it is offering free places to its ‘ Maximising the Potential of Renewable Energy through Numerical Simulation’ seminar on 21st May to All-Energy 2013 delegates.

The event presentations will discuss the following key themes:-

  • Aerodynamics  / Computational Fluid Dynamics
  • Mechanical Integrity / Stress Analysis / FE Calculations
  • Heat Transfer
  • Multi-Disciplinary Calculations
  • Statistical Methods
  • Product Design & Process Optimisation Studies
  • Simulation Data Managements
Webinar Wednesday: eLearning - SolidWorks - Instant3D and Direct Editing
Date: May 22, 2013
Place: USA

Join us for a look at how you can use the direct editing tools in SolidWorks to make quick and easy changes to your models. Whether you’re working with native SolidWorks files or imported geometry, we’ll show you how you can make adjustments in minutes. We’ll take a look at using Instant3D to avoid back and forth edits and rebuilds, and how you can use some powerful tools to quickly achieve complex geometry. We’ll also cover how to modify imported files to remove or adjust existing geometry.

Webinar Wednesday: eDemo - SolidWorks Composer - Improve Technical Communications with SolidWorks Composer
Date: May 22, 2013
Place: USA

Creating technical communications doesn’t have to be a painful experience. Learn how you can cut rework time, improve processes, and create dynamic animations with SolidWorks Composer. This powerful software can streamline the creation of your 2D and 3D graphical content for technical documentation and product communications. Register now to see how.

Webinar: Reducing Cost of Quality with Teamcenter CAPA
Date: May 22, 2013
Place: India

Join Geometric and Siemens, as we give an overview of our Teamcenter Issue Management and CAPA solution. The Teamcenter PLM platform provides a scalable framework on an enterprise collaborative backbone to enable the end to end issue management process and a formal corrective and preventive process. You will see how the barriers between quality and other teams such as engineering will no longer exist, eliminating wasted time and effort.


Teamcenter Issue Management and CAPA Highlights:-

• Standardizes and automates the process of issue resolution
• Captures the knowledge of issue resolution, making it easy to find quality information within your PLM environment
• Brings quality into mainstream product and manufacturing engineering
• Reduces cost of quality
• Intuitive web-based new age UI

SolidWorks Composer 201: Creating Animations
Date: May 22, 2013
Place: USA

Wednesday, May 22, 2013 9:00 AM - 10:00 AM PDT

Presenter: Daniel Lubbe, Applications Engineer

Join us to learn about
creating animations using SolidWorks Composer.  Curriculum includes:


*Creating animations efficiently
*Updating only individual geometryin the model that will reflect in the animation

SolidWorks Composer 301: Creating Interactive Documents for your End User
Date: May 29, 2013
Place: USA

Wednesday, May 29, 2013 9:00 AM - 10:00 AM PDT

Presenter: Daniel Lubbe, Applications Engineer

Curriculum includes:
*Introduction to links/events
*How to link between views and animations

Webinar Wednesday: eLearning - SolidWorks Enterprise PDM - Project and Task Creation
Date: May 29, 2013
Place: USA

Want to streamline your project and task creation for your users? Learn to add projects and tasks that help your users work more efficiently and with fewer errors. We’ll show you how to create new project templates in the Administration, and create file conversion tasks and have them automatically initiate a workflow.

Webinar Wednesday: eDemo - HawkWare - Custom Productivity Tools for SolidWorks
Date: May 29, 2013
Place: USA

Hawk Ridge Systems is always looking for ways to help our customer base through the automation of SolidWorks Software products. Join us for a webinar to see some of the unique tools we have created and maybe even spur some ideas for future tools. We’ll review some key functionalities of HawkWare, including Custom Document Number Generation, Batch Export, and Explode Configurations.

Simulation Month - Hawk Ridge Systems Presents New Analysis Technology
Date: May 30, 2013
Place: USA

We’re excited to bring a new type of analysis technology to our customer base. We’re not able to let the secret out just yet, but check back after May 20th for more information.

Autodesk - DelCAM

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
CAM Software Developments at IMTS 2016 – Part 1
Jobs
Solutions Engineer - Geospatial Tools Specialists for Geographic Information Services, Inc. at Denver, CO
Solutions Engineer - Data Portal Specialist for Geographic Information Services, Inc. at Denver, CO
Upcoming Events
2016 South Florida GIS Expo at 650 Okeechobee Boulevard West Palm Beach FL - Sep 29 - 30, 2016
PLM Components Innovation Conference at Aloft Boston Seaport 401-403 D St Boston MA - Oct 11 - 12, 2016
Fresno GoEngineer and SOLIDWORKS 2017 Launch Premiere at innovEd Inc 7135 N Chestnut Ave. Ste 10 Fresno CA - Oct 11, 2016
Woodland Hills GoEngineer & SOLIDWORKS 2017 Launch Premiere at HILTON WOODLAND HILLS/LOS ANGELES 6360 Canoga Avenue Woodland Hills CA - Oct 13, 2016
SolidCAM: Surprising Advantages of Integrated CAM Webinar 10/19/2016
MasterCAM



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise